NAVEE Electric Golf Push Cart

Safety Information

Read this manual carefully before use, and retain it for future reference. For detailed e-manual, please go to naveetech.com

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS

Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials. Store Indoors When Not in Use.

WARNING—To reduce the risk of injury, user must read instruction manual.

NAVEE Electric golf push carts (hereinafter referred to as push cart) are designed for the transportation of golf bags and clubs contained within. Using the push cart for any other purpose may cause damage to the push cart and cause harm to the user.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Children shall not play with this product. Ensure children and pets are kept at a safe distance from the push cart while it is operating.

Do not attempt to transport any other equipment.

The push cart is not designed for the transportation of people.

The maximum rated load suitable for this push cart is 30 kg (66.1 lbs).

Keep your hands and feet away from the wheels when the push cart is moving.

Do not use the push cart to assist you when walking up hills.

Do not place the push cart near a heat source or fire source.

Submerging the push cart in water (e.g. a lake) is likely to cause damage to the push cart.

Do not operate the push cart whilst under the influence of drugs or alcohol.

Only use accessories and replacement parts that are approved by the manufacturer.

Watch out for hand crush and pinch points hazards in the following positions during installation and use: between the wheel and frame when installing the wheel; openings on the wheels; and between the folding joint and the stem when folding or unfolding.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Power-off the vehicle during charging, or into a certain nonoperational mode.

WARNING! Keep plastic covering away from children to avoid suffocation.

WARNING! Never use the product close to a water source.

WARNING! Stop using the product when damaged.

Make sure the push cart is turned off when being transported and kept in its original packaging if possible.

Please use this product in accordance with the instructions in the user manual. Users are responsible for any loss or damage arising from improper use of this product.

WARNING! Do not use any third-party battery or battery charger. The push cart can only be used with the model FY0422521500 battery charger.

WARNING: For the purposes of recharging the battery, only use the charger provided with this push cart.

Only use the T2345-B64A battery pack provided with the appliance.

Always recharge as soon as possible after finishing your round, regardless of the number of holes played.

Batteries must be stored and charged on a dry, non-carpeted surface at a temperature ranging between 0°C and 40°C.

Never leave batteries charging for longer than necessary – disconnect when the green LED light indicates the battery is fully charged.

The battery and charger must only be opened and maintained by authorised personnel. Unauthorised opening increases the risk of safety issues and will invalidate your warranty.

Take care not to drop the battery as this may cause damage to the internal cells which could affect battery performance and safety.

Regularly check the battery for visible signs of damage. Do not charge or use the battery if any damage is suspected—contact our Technical Support team immediately for advice.

If the push cart will not be used for an extended period, fully charge it, then turn it off and store in a cool, dry place. Recharge the push cart at least once every 3 months to avoid over-discharging the battery.

Do not expose the unit or battery to excessive temperatures.

Do not damage the battery when removing it to avoid short circuits or liquid leakage. If the battery leaks, keep the fluid from touching your skin or clothes, and wipe it away immediately with a dry cloth. Then send the battery to an appropriate recycling facility or the designated after-sales service team to properly dispose of it.

Accessories and any additional items which are not approved by the manufacturer shall not be used.

The appliance is not intended for use at elevations greater than 2000 m above sea level.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

To find a qualified service provider, please contact us at service@navee.tech or visit https://www.naveetech.com.

The product contains a rechargeable lithium-ion battery pack, and improper disposal of these batteries will cause harm to the environment. Follow the steps below to remove the batteries before disposing of the push cart and discard the batteries properly:

1. When removing the batteries from the product, it is better to use up the batteries and make sure your product is disconnected from power.
2. Slide the red toggle switch to disconnect the battery, press and hold the release clip, then lifting the battery using the handle grooves. Do not damage the battery case to avoid any risk of injuries.
3. Return the batteries to a professional recycling organization.

Product Overview

The pictures shown are for illustration purposes only. Actual product may vary.

• Power Assist Button
• Handle
• Dashboard
• Umbrella Holder Base
• Net Bag
• Drink Holder Base
• Strap
• Release Clip
• Battery Connection Switch
• Charging Port
• Battery Handle Slot
• Rear Wheel Release Button
• Battery Compartment
• Lower Bag Support
• Front Wheel
• Speed Control Button
• Power Button
• USB Port
• Upper Bag Support
• Folding Lock Button
• Anti-Tip Wheel
• Front Wheel Release Button

Dashboard

① Speedometer: It displays the current speed when the push cart is working. When the push cart has an issue, it displays an error code.

② Battery Level (Push Cart): The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.

③ Bluetooth: When the icon lights up, it indicates the push cart has been successfully connected to the mobile device.

④ Error Notification: When the wrench icon displays red, it indicates that an error has occurred.

⑤ Temperature Warning: If the battery temperature is too high or too low, the thermometer icon will be on. This will result in reduced acceleration and possibly charging issues. Use or charge the push cart after its battery temperature returns to the normal operating range.

⑥ Remote Control Pairing Notification: The ) on the dashboard blinks to indicate remote control is in pairing mode with the push cart. When both and are solidly lit, pairing is successful.

⑦ Battery Level (Remote Control): The battery power is indicated by 5 bars, each representing approximately 20% of a full battery. Note: The battery lever can be displayed once the remote control is connected to the push cart.

Remote Control

• ① Indicator
• While in Use: Slow flashing RED: Low battery; Fast flashing RED: Critically low battery
• While Charging: Flashing RED: Charging; Solid RED: Fully charged
• ② Forward Button: Press and hold to move forward the cart at the preset speed.
• ③ Left Button: Press and hold to turn left; release to stop the turn.
• ④ Stop Button: Short press to stop the push cart immediately.
• ⑤ Down Button: Press and hold to reduce speed. The longer you press, the slower the speed. When the speed drops to 1 and the dashboard shows R, reverse mode is activated.
• ⑥ Right Button: Press and hold to turn right; release to stop the turn.
• ⑦ Menu Button: Press 5 times in a row to enter remote control pairing mode. Press and hold for 3s to enter Auto-Follow mode (Birdie 3X only). To exit, press and hold for 3s again. Press and hold + ◉ for 3s to lock/unlock the remote. When locked, only remains active. Click 2 times to activate constant-speed mode.

Maintenance and Care

Note: During cleaning, make sure that the push cart is turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems.

Daily Maintenance

It's recommended to check your push cart before each use to ensure:

• There is no build up of excess mud and dirt.
• The front and rear wheels are securely fitted and turning freely.
• The front and rear wheel axles are greased and well lubricated.
• The front and rear wheel quick release buttons are clamped down.

Cleaning

• Do not wash the push cart with a high-pressure water spray.
• Keep your push cart clean by using a cloth with warm water and a mild detergent.
• Do not hose down your push cart under any circumstance, as the push cart has electronic components.
• Ensure that the battery connection switch is free from sand.
• Ensure that the stem bracket is free from sand.
• Do not submerge your push cart in water as it will cause irreparable damage.
• Clean the battery base when the battery is removed from the push cart.

Rear wheel axles maintenance

• Lubricate the rear wheel sub axles once a month.
• To remove the rear wheels, press the release button while gently pulling the wheel off. Apply a small amount of petroleum jelly or light grease to the stub axles.

Front wheel maintenace

• Remove the front wheels periodically for cleaning and lubrication.
• Clean the wheel shafts thoroughly and apply light grease to ensure optimal performance.

Storage

• Do not store your push cart outdoors.
• Minimize exposure to rain as much as possible; during heavy rainfall, use an umbrella or protective cover.
• Wipe off excess water from the push cart before placing the push cart in storage.
• Never use a pressure washer to clean your push cart. To prevent water damage, wipe down with a damp cloth.
• Avoid using high pressure air hoses near moving components.
• Avoid exposure to items which may scratch, damage or exert excessive force on the LCD display.

Troubleshooting

If the push cart is not working properly, the screen display will show an error message. Please refer to the troubleshooting table below to find your solution based on the error message.

Certifications

FCC Supplier's Declaration of Conformity

This supplier's declaration of conformity is hereby for Product: Electric Golf Push Cart Model Number(s): Birdie 3-U, Birdie 3X-U Brand/Trade: NAVEE

We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part Regulation.

Responsible Party-U.S.Contact Information

Company: SPACEWALKER PTE. LTD.

Address: 60 PAYA LEBAR ROAD #07-54 PAYA LEBAR SQUARE SINGAPORE (409051)

Country: Singapore

FCC Compliance Statement for USA

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Industry Canada (IC) Compliance Statement for Canada

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

FCC / IC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Safety Warning

• Danger! Read user manual before use.
• WARNING Read carefully and keep for future reference.
• Direct current
• SMPS (Switch mode power supply unit)
• SMPS incorporating a short-circuit-proof safety isolating transformer(inherently or non-inherently)
• WARNING For indoor use only (for the charger).
• WARNING Class II appliance
• Alternating current
• The charger intended for use at altitudes not exceeding 5000m.
• Time-lag miniature fuse-link where X is the symbol for the time/current characteristic as given in IEC 60127

Warranty Summary

This product includes a limited warranty that covers manufacturing defects for a specified period from the date of purchase. Warranty terms, duration, and service availability may vary by country or region. The warranty does not cover damage caused by misuse, accidents, or unauthorized repairs. For detailed terms and local support, please visit https://service.naveetech.com.

Specifications

Battery Charger

WARNING

1. The charger is designed for indoor use only. Do not expose it to rain or snow.

2. Do not used for non-rechargeable batteries, as they can overheat and break.

3. Misuse other types of batteries may burst causing personal injury and damage.

4. Do not incinerate, disassemble or short circuit batteries.

5. If the performance of the batteries decrease substantially, it is time to replace the batteries.

6. Store the charger in a cool and dry place when not in use.

7. Disconnect the supply before making or breaking the connections to the battery.

8. Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging.

9. During charging, the battery must be placed in a Well Ventilated area.

10. Keep electrical appliances out of reach from Children or infirm persons. Do not let them use the appliances without supervision.

11. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

12. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

13. The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped.

14. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

Charging instructions

1. Connect the charger directly to a power source. Never use extension cords.
2. The charger can only charge Lithium-ion battery.
3. Avoid reverse charging.
4. The chargers are not intended to charge automobile batteries.

DC detachable power supply part

Battery Pack

WARNING

1. Do not dismantle, open or shred secondary cells or batteries.
2. Keep batteries out of the reach of childrenBattery usage by children should be supervised. Especially keep small batteries out of reach ofsmall children.
3. Seek medical advice immediately if a cell or a battery has been swallowed.
4. Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
5. Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box ordrawer where they may short-circuit each other or be short-circuited by other metal objects.
6. Do not remove a cell or battery from its original packaging until required for use.
7. Do not subject cells or batteries to mechanical shock.
8. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.If contact has been made, wash the affected area with copious amounts of water and seekmedical advice.
9. Do not use any charger other than that specifically provided for use with the equipment.
10. Observe the plus (+) and minus (-) marks on the cell, battery and equipment and ensurecorrect use.
11. Do not use any cell or battery which is not designed for use with the equipment.
12. Do not mix cells of different manufacture, capacity, size or type within a device.
13. Always purchase the battery recommended by the device manufacturer for the equipment.
14. Keep cells and batteries clean and dry.
15. Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
16. Secondary cells and batteries need to be charged before use. Always use the correct chargerand refer to the manufacturer's instructions or equipment manual for proper charging instructions.
17. Do not leave a battery on prolonged charge when not in use.
18. After extended periods of storage, it may be necessary to charge and discharge the cells orbatteries several times to obtain maximum performance.
19. Retain the original product literature for future reference.
20. Use the cell or battery only in the application for which it was intended.
21. When possible, remove the battery from the equipment when not in use and dispose of it properly.