Pixsys PL600
Modular, flexible, powerful PLC
www.pixsyusas.com
Modular concept: CPU unit, analogue – digital I/O
The Pixsys PL600 offers a modular design, allowing for flexible configuration with CPU units and various analogue and digital I/O modules.
Fieldbus protocols:
- Modbus RTU
- CAN Open
- Modbus TCP
IloT protocols:
- Web Server HTML 5
- MQTT client
- OPC UA Server
Features an autotuning module dedicated to process control.
Includes Pixsys Portal VPN for Remote Control and Assistance (passthrough).
Optional Dual Ethernet Port for distinct networks.
Main features
| BOX | DIN43880 - 3x mod. 54x90x64 (PL700, PLE500-5AD, PLE500-6AD, PLE500-10AD), 1 module 18x90x64 (PLE500-8AD) |
| POWER SUPPLY | 12..24 V DC +/- 15% |
| POWER CONSUMPTION | 3 W |
| OPERATING CONDITIONS | Temperature 0-45 °C, humidity 35..95 RH% |
| MATERIAL | Noryl VO |
| WEIGHT | Approx. 250 g |
| SEALING | IP20 (box and terminal blocks) |
| TERMINAL BLOCKS | Extractable |
| OPERATING SYSTEM | Linux |
| SOFTWARE TOOL | LogicLab, 5 programming languages: Instruction list, Structured text, Function blocks diagram, Ladder diagram, Sequential Function chart (IEC61131-1) |
| MQTT | MQTT client integrated with LogicLab PLC, encryption supported |
| VIRTUAL HMI MODE | Graphic interface through Web Server HTML5 and VNC services integrated in LogicLab Runtime |
PL600 Technical data (CPU)
| PROCESSOR | ARM Cortex A8-1 GHz |
| MEMORY | Flash 2Gb pSLC Technology / RAM 512 MB DDR3 |
| MEMORY CARD | Micro SD |
| EXPANSION BUS | PLE-DIN-BUS (real time) on DIN RAIL |
| FIELD BUS | RS485 (Modbus RTU Master/Slave), RS232 (Modbus RTU Master/Slave), CANopen (Master) |
| USB | 1 port for update PLC logic file, datalogger export |
| USB | 1 port 10/100 Base-T on RJ45 connector in switch mode |
PLE500 Technical data (I/O modules)
| PLE500-6AD / PLE500-5AD | PLE500-10AD | PLE500-8AD | |
|---|---|---|---|
| BUS PROTOCOL | PLE-DIN-BUS (real time) on DIN RAIL | PLE-DIN-BUS (real time) on DIN RAIL | PLE-DIN-BUS (real time) on DIN RAIL |
| DIGITAL INPUT | 16 PNP (selectable) | 16 PNP (selectable) | 2 PNP |
| DIGITAL OUTPUT | 16 PNP (selectable) | 16 PNP (selectable) | 2 PNP |
| ENCODER INPUT | 4x (Res. 32 bit, 50 KHz) Push Pull O | 1x (Res. 16 bit) selectable: TC type K,S,R,J, PT100, PT500, PT1000, Ni100, PTC1K, NTC10K, (β 3435K), 0..10 V (54000 points), 0/4..20mA (40000 points), 0..60 mV (16000 points), potentiometer 6 ΚΩ, 150 ΚΩ (50000 points) | 4x TC type K,S,R,J, PT100, PT500, PT1000, Ni100, PTC1K, NTC10K, (β 3435K), potentiometer 6 ΚΩ, 150 ΚΩ (50000 points) 0..60 mV (16000 points) |
| ANALOGUE INPUT | 4x 0..10 V (54000 points), 0/4..20mA (40000 points) | 4x 0..10 V (54000 points), 0/4..20mA (40000 points) | 4x 0..10 V (54000 points), 0/4..20mA (40000 points) |
| ANALOGUE OUTPUT | 2x (Res. 16 bit) 0/4..20 mA | 2x 0..10V/4..20 mA | 2x 0..10V/4..20 mA |
| C.T. INPUT | 2x 0..10V/4..20 mA | ||
| GALVANICAL ISOLATION | From supply to serial Bus | 50 mA - 20 ms - 4096 points | 50 mA - 20 ms - 4096 points |
Ordering codes
| Code | Description |
|---|---|
| PL600-335-AD | PLC DIN Rail 1 Ethernet, 1 RS485, 1 RS232, 1 CANopen |
| PLE500-6AD | PLC Expansion 16 Digital Inputs/Outputs, 2 Analogue Inputs, 2 Analogue Outputs |
| PLE500-5AD | PLC Expansion 4 Analogue Inputs RTD/TC, 4 Analogue Inputs 4..20mA 0..10V, 2 Analogue Outputs |
| PLE500-8AD | PLC Expansion 1 Analogue Input, 2 Digital Outputs, 1 Analogue Output |
| PLE500-10AD | PLC Expansion 4 Analogue Inputs 4..20mA 0..10V, 2 Analogue Outputs |
