Pixsys ATR144 Blue Line
Programmable by RFID /NFC - No wiring required!
Pixsys Electronics
Key Features
The Pixsys ATR144 Blue Line offers a powerful display with interactive text messages, on-line programming help, and dynamic smart tune capabilities. It is programmable via RFID/NFC, eliminating the need for wiring.
Device Description:
A compact control unit with a digital display showing process values and parameters. It features physical buttons for interaction and connectivity options for programming and communication.
Visual Representation:
The device features a dual-line display: a main 4-digit, 0.38-inch white display and a secondary 5-digit, 0.28-inch red display. It includes navigation buttons labeled 'FNC' and 'SET'.
Connectivity:
Programmable via RFID/NFC using the 'My Pixsys' app on Android smartphones. Also supports setup via NFC for iOS smartphones and uses a Memory Card USB (Cod. 2100.30.013) for data storage.
Physical Dimensions:
- Front Panel Cut-out: 28.5 x 70.5 mm
- Device Dimensions: 77 mm (width) x 35 mm (height) x 53 mm (depth)
- Suggested Panel Thickness: 2-8 mm
Main Features Table
| BOX | 32x74 (front panel) x 53 mm |
| POWER SUPPLY | 24..230 V AC / DC ±15% 50/60 Hz - galvanical isolation 2,5KV |
| POWER CONSUMPTION | 5 W |
| DISPLAY | 4 digits 0.38" white + 5 digits 0.28" red |
| OPERATING CONDITIONS | Temperature 0-45 °C, humidity 35..95 RH% |
| MATERIAL | Box: PC UL94V2 self-extinguishing, front panel: PC UL94V2 |
| WEIGHT | Approx. 120 g |
| SEALING | IP65 (front panel) IP20 (box and terminal bloks) |
| QUICK SET-UP OPTIONS | Memory Card, software LABSOFTVIEW, or EASY-UP codes |
| "MyPixsys" APP | Device setup via NFC for Android smartphone [Google Play]. Via BT-NFC (2000.35.099) for iOS smartphone [App Store]. |
Input
- 1 CONFIGURABLE: Res. 16 bit, selectable for TC type K, S, R, J, T, N, B (automatic compensation of the cold junction -25..85°C, ±0,2% F.S. ±1 digit F.S.), thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (ẞ 3435K), process signals 0..10 V (50000 points), 0/4..20mA (40000 points), 0..60 mV (25000 points), potentiometer 1..150 ΚΩ (50000 points)
- SAMPLING TIME: Programmable up to 2,1 ms (frequency up to 470 Hz)
- 1/2 DIGITAL INPUTS: Setpoint change, Hold, Run, Tuning launch, Start / Stop, Lock configuration
Outputs
- 1/2 RELAYS: Relay 5 A - 250 V AC resistive charge
- 1 DIGITAL OUTPUT: 12 V DC - 25 mA max
- SERIAL COMMUNICATION: RS485 Modbus RTU - Slave (4800..115200 baud code-T)
Software Features
- CONTROL ALGORITHMS: ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned
- TUNING: Manual or automatic
- DATA PROTECTION: Lock of control / alarm setpoint / Access to parameters by password
- ALARM MODES: Absolute / Threshold, Band, High / Low deviation. Alarm with optional manual reset. Loop Break Alarm function
- AUTO/MANUAL FUNCTION: Output percentage command also with automatic change in case of sensor failure
- DOUBLE P.I.D.: Heating / Cooling P.I.D.
- SOFT-START: Rising gradient expressed as Degrees / Hour or fixed output percentage
- OPEN/CLOSE LOGIC: Open / Close logic for motorized valves
Ordering Codes
- ATR144-ABC: 1 Analogue Input + 2 Relays 5 A + 1 Digital Input / Digital Output
- ATR144-ABC-T: 1 Analogue Input + 1 Relay 5 A + 1 Digital Input / Digital Output + RS485
