Thermador PRG364WDH 36-Inch Gas Pro Harmony® Range with Griddle
Professional Series, Standard-Depth, Porcelain Cooktop Surface
Features & Benefits
- Exclusive Star® Burner delivers superior flame spread for more even heating with QuickClean Base® designed for easy cleaning.
- 2 ExtraLow® burners offer precision simmering, melting, or keeping warm.
- Non-stick griddle provides even heating across the entire cooking surface.
- Powerful 20,500 BTU bake and 17,500 BTU broil burners.
- Convection Bake offers precise multi-level baking results.
Technical Details
- Circuit Breaker: 20 A
- Volts: 120 V, 60Hz
- Energy Source: Gas
- Plug Type USA: 120V - 3 Prong
- Power Cord Length: 65" (1,651mm)
- Gas Supply: 3/4"
Warranty
- Limited Warranty, Entire Appliance, Parts and Labor: 2 Year
Rangetop
Total number of cooktop Burners: 4 + Griddle
- 1 - Power of Back Left Burner BTU: 15,000 and XLO
- 2 - Power of Front Left Burner BTU: 18,000 and XLO
- 3 - Power of Center 12" Electric Griddle: 1,630 W (6-Pass)
- 4 - Power of Back Right Burner BTU: 15,000
- 5 - Power of Front Right Burner BTU: 18,000
Oven
- Oven Capacity: 5.1 cu. ft.
- Cooking Modes: Bake, Convection Bake, Roast, Broil
- Sabbath: Yes
- Self Clean: No
- Telescopic Rack(s): 3
- Interior Lights: 2
- Bake Power: 20,500 BTU
- Broil Power: 17,500 BTU
- Home Connect® (Wi-Fi Enabled): Yes
Dimensions & Weight
- Cavity Interior Dimensions (HxWxD): 16 3/8" x 29 1/8" x 18 5/8"
- Cavity Usable Dimensions (HxWxD): 11 1/4" x 25 5/8" x 16 3/4"
- Overall Appliance Dimensions (HxWxD): 35 3/4" - 36 3/4" x 35 15/16" x 24 3/4"
- Required Cutout Size (HxWxD): 35 3/4" - 36 3/4" x 36" x 24"
- Net Weight: 335 lbs.
Accessories (Included)
- 3 Telescopic Racks
- Meat Probe
- 1 Griddle Plate
- 1 Grease Tray
- 1 Lg. Broil Pan
- Island Trim
Accessories (Optional)
- Wok Ring: PWOKRINGHC
- Professional Griddle: PAGRIDDLE
- 12" Pro Griddle with Tray: PAGRIDLFW
- 12" Professional Griddle Cover: PA12LCVRW
- Chopping Block / Cutting Board: PA12CHPBLK
- 12" Pro Grill Plate with Tray: PA12GRILLW
- 12" Grill Plate with Tray: PA12GRILFW
- Pro Harmony 7" Low Backguard: PA36WLBH
- Metallic Blue Knob Kit: PARKB36DHY
- High Altitude Kit: PAALTKITH
- LP Conversion Kit: PALPKITGA
36-Inch Range Dimensions
Diagram showing overall dimensions and measurements in inches and mm.
Overall Height: 35 7/8" (911 mm) Min. to 36" (933 mm) Max.
Overall Width: 35 15/16" (913 mm)
Overall Depth: 27 3/4" (691 mm)
Depth to Front Edge of Grate: 27 3/8" (695 mm)
Depth to Front Edge of Handle: 24 3/4" (630 mm)
Depth of Oven Cavity: 22 5/8" (575 mm)
Total Clearance: 44 7/8" (1140 mm)
Electrical Supply
Important: The cord supplied with gas ranges having an electric griddle requires a NEMA 5-20 receptacle. Local codes may require a different wiring method.
Warning: This appliance is equipped with a three-prong grounding plug for protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug. DO NOT ALTER THIS PLUG.
36-Inch Range Cutout Dimensions
Table detailing cutout dimensions for various range models.
Range model | Gas zone A | Electric zone B | X | C | D | E |
---|---|---|---|---|---|---|
All Harmony series | 4" (102) | 6" (152) | 5" (127) | N/A | N/A | 2" (51) |
36"/ 48" Grand series | 4" (102) | 6" (152) | 8" (203) | 4" (102) | 3" (76) | 2" (51) |
60" Grand series | 4" (102) | 6" (152) | 8" (203) | 4" (102) | 3" (76) | 1" (25) |
36-Inch Range Dimensions and Clearance Requirements with "Low Back"
Diagram illustrating clearance requirements for a low back installation.
Note: A 36-inch minimum clearance is required between the top of the cooking surface and the bottom of an unprotected cabinet. A 30-inch clearance can be used when the bottom of the wood or metal cabinet is protected by not less than 1/4 inch of a flame retardant material covered with not less than No. 28 MSG sheet steel, 0.015 inch (0.4 mm) thick stainless steel, 0.024 inch (0.6 mm) aluminum, or 0.020 inch (0.5 mm) thick copper.
Clearance to combustible materials: 36" (914 mm) min.
Low Back height: 7" (178 mm)
Recess depth: 24" (610 mm) max.
Total Clearance: 44 7/8" (1140 mm)
Cabinet Dimensions: 28" (711 mm) width, 27" (692 mm) depth.
36-Inch Range Dimensions and Clearance Requirements with "Flush Island Trim"
Diagram illustrating clearance requirements for a flush island trim installation.
Clearance to combustible materials: 36" (914 mm) min.
Clearance to combustible surface with Flush Island Trim: 6" (152 mm) min.
Shaded area behind range: Indicates minimum clearance to combustible surfaces; combustible materials cannot be located within this area.
For Flush Island Trim installations: Counter surface should have a cantilever edge meeting the back section of the Flush Island Trim accessory.
Inner wall clearance: If an inner wall is used under the cantilever counter top, there should be a 1/8" (3 mm) gap from the rear of the range to the inner wall.
Recess depth: 24" (610 mm) max.
Total Clearance: 44 7/8" (1140 mm)
Cabinet Dimensions: 28" (711 mm) width, 27 1/4" (692 mm) depth.
Important Notes
As defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances of less than 6" (152 mm) must be approved by the local codes and/or by the local authority having jurisdiction.
These warranties give you specific legal rights and you may have other rights that vary from state to state. Limited warranty from date of delivery. For complete warranty details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada.
Contact Customer Support for information regarding High Altitude Kits for Natural Gas or Dual-Fuel Pro Harmony Ranges connected to LP Gas.
Contact: 1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA
© 2023 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.