RGBlink 4K vue PTZ Camera
Advanced PTZ camera with 4K resolution, AI tracking, and NDI support.
Overview
The RGBlink vue 4K PTZ camera offers upgraded 4K@30Hz resolution via HDMI/RTSP and a new USB 3.0 output port, catering to modern conferencing and live streaming needs. The NDI version features NDI|HX2 for enhanced video quality and lower latency. Its front panel includes an OLED screen for real-time status. The camera design incorporates a 360°-visible TALLY indicator and identification board, adapting seamlessly to various environments.
Key Features
- 4K image sensor: 1/2.8-inch 8.42MP, 3840x2160 at 30fps.
- Optical Zoom: Available in 12X, 20X, and 30X options.
- Focus: Advanced autofocus for fast, accurate, and stable focusing.
- Image Quality: Low-noise CMOS with 2D/3D noise reduction for high Signal-to-Noise Ratio (SNR) and clarity.
- Outputs: HDMI, 3G-SDI, USB, and LAN. SDI supports 1080P60 up to 100 meters.
- Video Compression: H.265/H.264 up to 4K@30fps.
- Audio Compression: AAC/G.711A. AAC audio input (16k-48kHz) and G.711A (8kHz) support.
- Protocols: ONVIF, RTSP, RTMP (with RTMP push), and VISCA control.
- AI Tracking: Features face/human recognition for classrooms and meetings.
- Control: RS485/RS232 control (RS232 supports cascading). Supports VISCA/PELCO-D/P protocols with auto-detection.
- Gimbal: Silent gimbal with precision stepper motor for smooth, quiet operation.
- Power Saving: Low-power sleep mode under 400mW.
- Presets: 255 presets available, with 10 accessible via remote control.
- Remote Control: Infrared remote controller with anti-interference and signal passthrough.
- Applications: Ideal for education, conferences, medical, court, and command systems.
Specifications
Connectors and Standard Interfaces
| Category | Detail |
|---|---|
| Connectors: Video | HDMI, 3G-SDI, LAN (PoE+), USB3.0 |
| Connectors: Control | RS-232, RS-485 |
| Connectors: Control Loop-through | Loop-through RS232 output |
| Connectors: Audio Input | Line-in, Dual-channel 3.5mm audio jack |
| Connectors: Audio Output | HDMI, 3G-SDI, LAN (PoE+), USB3.0 |
| Standard: LAN | 1000M Ethernet port with POE+ power supply, supports audio/video output and IP VISCA control protocol |
| Standard: Image Bitstream | Dual stream output capability |
| Standard: Video Compression Format | H.264, H.265 |
| Standard: USB 3.0 | MJPG, H.264, H.265, YUY2, NV12 |
| Standard: Control Protocol | VISCA/Pelco-D/Pelco-P |
| Standard: Baud Rate | 115200/9600/4800/2400bps |
| Standard: Audio Compression Format | AAC, G.711A |
| Standard: Network Protocol | Support RTSP, RTMP, ONVIF, SRT, NDI (optional); Network VISCA control protocol supported |
| Standard: USB Communication Protocol | Remote firmware upgrade, reboot and reset supported; UVC (USB Video Class) and UAC (USB Audio Class) compliant |
Lens Parameters
| Parameter | 12X | 20X | 30X |
|---|---|---|---|
| Lens Optical Zoom | 12x | 20x | 30x |
| Digital Zoom | 16x | 16x | 16x |
| EFL (f) | f=4.1~49.2mm | f=4.8~96mm | f=5.2~148.4mm |
| H FOV° | 70.4°~6.72° | 60.04°~3.81° | 58.1°~2.14° |
| F-Number (F/No.) | F1.8~F2.68 | F1.8~F2.9 | F1.3~F4.8 |
| Minimum Illumination | 0.5Lux (F1.8, AGC ON) | ||
| Digital Noise Reduction | 2D & 3D digital noise reduction | ||
| White Balance | Auto/manual/one-click white balance/specified color temperature (2400K-7100K, 100K step) | ||
| Focus | Auto/manual/one-press focus | ||
| Iris | Auto/manual | ||
| Electronic Shutter | Auto/manual | ||
| Backlight Compensation | On/off | ||
| Wide Dynamic Range | Off/dynamic level adjustment | ||
| Video Adjustment | Brightness, sharpness, saturation, contrast, white balance, anti-flicker, low-light compensation adjustable | ||
| Signal-to-Noise Ratio | >50dB |
Pan-Tilt Parameters
| Parameter | Value |
|---|---|
| Pan Rotation | -170°~+170° |
| Tilt Rotation | -30° ~ +90° |
| Pan Control Speed | 0.1°/s ~ 60°/s |
| Tilt Control Speed | 0.1°/s ~ 30°/s |
| Preset Speed | Pan: 60°/s, Tilt: 30°/s |
| Number of Presets | Users can set up to 255 preset positions (10 via remote control) |
Other Parameters
| Parameter | Detail |
|---|---|
| Power Adapter | Input: AC110V-AC220V, Output: DC12V/2.5A |
| Input Voltage | DC12V±10% |
| Input Current | 1.5A (Max) |
| Power Consumption | 18W (Max) |
| Storage Temperature | -10°C~+60°C |
| Storage Humidity | 20%~95% |
| Operating Temperature | -10°C~+50°C |
| Operating Humidity | 20%~80% |
| Dimensions | 167×152×210 mm (6.6x6.0x8.3 in [millimeters]) |
| Net Weight | 1.9kg (4.2lb) |
| Operating Environment | Indoor |
| Remote Maintenance | Firmware upgrade, reboot, reset |
Video Signal Format and Resolution
| Interface | Format/Resolution |
|---|---|
| HDMI | 3840 x 2160@30/29.97/25 | 1920 × 1080P@60/59.94/50/30/29.97/25 | 1280 × 720P@60/59.94/50 |
| SDI | 1920 x 1080P@60/59.94/50/30/29.97/25 | 1920 × 1080I@60/50/59.94 | 1280 x 720P@60/59.94/50 |
| USB (YUY2/NV12) | 1920 x 1080 | 1280 × 720 | 1024 × 576 | 800 × 600 | 800 × 448 | 640 x 480 | 640 × 360 | 480 × 270 | 320 × 180P@30/25/20/15/10/5fps |
| USB (H264/H265/MJPG) | 3840 x 2160 @30/29.97/25 | 1920 x 1080 | 1600 × 896 | 1280 × 720 | 1024 × 576 | 960 × 540 | 800 x 600 | 800 × 448 | 720 × 576 | 720 x 480 | 640 × 480 | 640 × 360 | 480 × 270 | 352 × 288 | 320 x 240@60/30/25/20/15/10/5fps |
| LAN (H264/H265) Main Code Stream | 3840 x 2160 | 2592 x 1944 | 2304 × 1296@30/29.97/25 | 1920 x 1080 | 1280 × 720@60/30/25/20/15/10/5fps |
| LAN (H264/H265) Subcode Stream | 1920 x 1080 | 1280 × 720 | 640 × 360 | 640 × 480 | 320 × 240 | 320 × 180@30/25/20/15/10/5fps |
Product Codes
| Product Code | Item |
|---|---|
| 981-1100-01-0 | RGB12X-PAI-OL 4K30 12X POE Tracking Camera |
| 981-1100-02-0 | RGB12X-NAI-OL 4K30 12X POE NDI Tracking Camera |
| 981-1100-03-0 | RGB20X-PAI-OL 4K30 20X POE Tracking Camera |
| 981-1100-04-0 | RGB20X-NAI-OL 4K30 20X POE NDI Tracking Camera |
| 981-1100-05-0 | RGB30X-PAI-OL 4K30 30X POE Tracking Camera |
| 981-1100-06-0 | RGB30X-NAI-OL 4K30 30X POE NDI Tracking Camera |
Dimensions
The camera has dimensions of 167×152×210 mm (6.6x6.0x8.3 in [millimeters]).
Installation
The following describes the mounting procedures for the RGBlink 4K vue PTZ camera.
Wall Mount Installation
[Step 1] Attach the limited post to the camera using a 1/4-20UNC bolt. Secure the M6 nut and shim or M6 swelling bolt to the wall mount bracket.
[Step 2] Mount the wall mount bracket to the wall.
[Step 3] Connect the camera assembly to the wall mount bracket.
[Step 4] Adjust the camera angle as needed.
[Step 5] Finalize the installation.
Ceiling Mount Installation
[Step 1] Attach the limited post to the camera using a 1/4-20UNC bolt.
[Step 2] Secure the ceiling upper covering plate and ceiling lower covering plate using PA3x30 self-tapping screws.
[Step 3] Mount the ceiling bracket assembly to the ceiling.
[Step 4] Connect the camera assembly to the ceiling bracket.
[Step 5] Adjust the camera angle as needed.
[Step 6] Finalize the installation.
Note: The accessories for mounting the camera are not included in the package.
