MARSHYDRØ USER MANUAL
GROW ON EARTH, GROW WITH MARS
Certifications: CE, UK, CA, Recycling, Intertek 4009006
REGULAR GROW KITS
Mars Hydro offers a range of Regular Grow Kits, including models such as:
- TS600 Regular Grow Kits
- TS1000 Regular Grow Kits
- TSL2000 Regular Grow Kits
- TSW2000 Regular Grow Kits
- SP3000 Regular Grow Kits
- FC-E3000 Regular Grow Kits
- FC-E4800 Regular Grow Kits
THERMOSTAT CONTROLLED GROW KITS
For advanced environmental control, Mars Hydro provides Thermostat Controlled Grow Kits, including:
- TS1000 Thermostat Controlled Grow Kits
- TSL2000 Thermostat Controlled Grow Kits
- TSW2000 Thermostat Controlled Grow Kits
PRODUCT CONTENTS OVERVIEW
Each kit typically includes the following components:
- Grow Tent
- LED Grow Light ?
- Inline Duct Fan & Filter ?️?
- Timer Humidity Thermometer ⏱️?️
- Grow Bag
- Plant Netting
- Yo Yo ? (Rope Adjuster)
TS SERIES INSTALLATION METHOD
Follow these steps for installing TS Series LED lights:
- Hang up 4-foot [steel hanger] ⛓️.
- Hang up adjustable [rope ratchet] ⛓️.
- Set the [driver] and [dimmer] on the [LED panel] (or remove them off).
- Connect [LED board] with [driver] ?.
- Connect [power cord] ?.
- Hang the light with [YOYO] (Correct way to use [YOYO]) ?.
FC-E SERIES INSTALLATION METHOD
Follow these steps for installing FC-E Series LED lights:
- Install [End Caps] to the [support bars]. The joint end should be placed on one side, install [Hanging Kit] ⛓️ and the hole to be inside.
- Click on [Plastic Cement Spring] to the [light bar] (Recommended to fix on the green anchors provided).
- Attach the adjustable [Snap-in Brackets] to the [Driver] and secure it with [Plastic Nuts]. Connect the [All-in-one Cable] to the [Light Bar] [Joints] and screw them tightly. Tighten the [Waterproof Connector] ?.
- Snap the [Driver] on the [Light Bars]; or Hang it Up with [Steel Hook] ⛓️ (FC-E6500/FC-E8000/FC-E1000W only).
LED GROW LIGHT DIMMING OPERATION
Control your LED grow light intensity with the following features:
- CH1: [RJ11 port]
- CH2: [RJ11 port]
- DIM: [Dimmer On]
- EXT: [Dimmer Off]
- [Dimming Knob] (10%-100%)
- OFF: [Power Off]
Note: Energy saving and green consumption, starting from the Mars Hydro grow tips.
Instruction: Turn on dimmer switch and adjust the light intensity.
SPECIFICATIONS & CONTENTS
Detailed specifications for Mars Hydro LED Grow Lights:
Model | Footprint | Input Power | Input Voltage | Amps | Dimming Range | Dimensions/Weight |
---|---|---|---|---|---|---|
TS-600 | 2FT × 2FT 0.6m × 0.6m |
100W±5% | 110-130V(NA) 220-240V(EU) |
1.38A@AC120V 0.80A@AC240V |
Undimmable | 35.6*31*3.6CM/0.9KG 14*12.2*1.4IN/2LB |
TS-1000 | 2.5FT × 2.5FT 0.8m × 0.8m |
150W±5% | 100-277V | 1.235A@AC120V 0.6223A@AC240V 0.5498A@AC277V |
10%-100% | 38.2*33.7*5.5CM/1.8KG 15*13.3*2.1IN/4LB |
TSL-2000 | 3FT × 5FT 1m × 1.5m |
300W±5% | 100-277V | 2.550A@AC120V 1.311A@AC240V 1.135A@AC277V |
10%-100% | 102*25.3*6.4CM/3.6KG 40.1*10*2.5IN/7.9LB |
TSW-2000 | 4FT × 4FT 1.2m × 1.2m |
300W±5% | 100-277V | 2.451A@AC120V 1.227A@AC240V 1.082A@AC277V |
10%-100% | 56.1*50*6.8CM/3.7KG 22*20*2.7IN/ 8.1LB |
SP-3000 | 3FT × 5FT 1m × 1.5m |
300W±5% | 100-277V | 2.47A@AC120V 1.24A@AC240V 1.10A@AC277V |
10%-100% | 108*8*10.3CM/4.6KG 42.5*3.1*4IN/10.14LB |
FC-E 3000 | 3FT x 3FT 0.9m x 0.9m |
300W±5% | 100-277V | 2.508A@AC120V 1.247A@AC240V 1.090A@AC277V |
10%-100% | 61.4*60*8CM/5.3KG 24.2*23.6*3.1IN/11.7LB |
FC-E 4800 | 4FT × 4FT 1.2m × 1.2m |
480W±5% | 100-277V | 3.998A@AC120V 1.997A@AC240V 1.749A@AC277V |
10%-100% | 86.4*85.2*8CM/9.1KG 34*33.5*3.1IN/20.1LB |
Included accessories: LED Grow Light ?, Power Cord ?, YoYo ?, Hanging Kit ⛓️.
GROW TENT PRODUCT CONTENTS
Contents of Mars Hydro Grow Tents by size:
Component | 24x24x55IN (60x60x140CM) |
27x27x63IN (70x70x160CM) |
39x39x71IN (100x100x180cm) |
48x24x71IN (120x60x180CM) |
48x48x80IN (120x120x200CM) |
---|---|---|---|---|---|
Tent | 1 pc | 1 pc | 1 pc | 1 pc | 1 pc |
Floor Tray | 1 pc | 1 pc | 1 pc | 1 pc | 1 pc |
D | 8 pcs | 8 pcs | 8 pcs | 8 pcs | 8 pcs |
E | 8 pcs | 8 pcs | 8 pcs | 4 pcs | 8 pcs |
F | 4 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs |
G | 4 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs |
H | 1 pc | 1 pc | 1 pc | 4 pcs | 2 pcs |
J | 1 pc | 1 pc | 1 pc | 2 pcs | 1 pc |
K | 0 | 0 | 0 | 1 pc | 0 |
Application Mapping:
- TS 600 Regular Grow Kits
- TS1000 Regular/Thermostat Controlled Grow Kits
- SP3000 Regular Grow Kits
- FC-E3000 Regular Grow Kits
- TSL2000 Regular/Thermostat Controlled Grow Kits
- FC-E4800 Regular Grow Kits
- TSW2000 Regular/Thermostat Controlled Grow Kits
TENT SETUP
Follow these steps to set up your Mars Hydro Grow Tent:
- Step 1: Set up the tent frame according to the alphabetical order (Diagram shows assembly of frame poles labeled D, E, F, G).
- Step 2: Place the tent frame horizontally (Diagram shows the assembled frame lying on its side).
- Step 3: Cover the tent frame with the tent cloth (Diagram shows unfolding the tent cloth and placing it over the frame, then zipping it up).
- Step 4: (1) Place the tent vertically. (2) Get the tent poles inside the tent and Put the floor tray into the tent (Diagram shows the tent standing upright with poles and floor tray inside).
FAN SET WITH DIFFERENT GROW KITS
Mars Hydro offers various fan sets compatible with different grow kits:
Component | 4 Inch Regular Grow Kit | 4 Inch Thermostat Controlled Grow Kit | 6 Inch Regular Grow Kit | 6 Inch Thermostat Controlled Grow Kit |
---|---|---|---|---|
Carbon Filter ? | 4 Inches | 4 Inches | 6 Inches | 6 Inches |
Inline Fan ?️ | 4 Inches Intelligent Control fan | 4 Inches Manual Control fan | 6 Inches Intelligent Control fan | 6 Inches Manual Control fan |
Ducting ? | 25 FT | 25 FT | 25 FT | 25 FT |
Duct Clamps ? | 3 Pcs | 3 Pcs | 3 Pcs | 3 Pcs |
Humidity Thermometer ?️ | 1 | 0 | 1 | 0 |
Timer ⏱️ | 1 | 0 | 1 | 0 |
Application:
- TS600 Grow Tent Kit
- TS1000 Grow Tent Kit
- TSL2000 Grow Tent Kit
- SP3000 Grow Tent Kit
- FC-E3000 Grow Tent Kit
- TS1000 Thermostat Controlled Grow Kits
- TSL2000 Thermostat Controlled Grow Kits
- TSW2000 Grow Tent Kit
- FCE4800 Grow Tent Kit
- TSW2000 Thermostat Controlled Grow Kits
Fan Installation Method
Different Ways Of Setting
Exhaust Filter System with Carbon Filter and Fan inside: (Diagram shows fan and filter inside tent, air flowing out)
Intake Filter System with Carbon Filter and Fan Outside: (Diagram shows fan and filter outside tent, air flowing in)
Exhaust Filter System with Carbon Filter inside and Fan Outside: (Diagram shows filter inside, fan outside, air flowing out)
WARRANTY
English:
- If your product has any problem, contact our customer service. We will help you solve the problem.
- Grow light has a 5-year warranty.
- Within 1 year: Free repairing and shipping.
- 1 year - 5 years: You pay round trip shipping charges, repair charges, and handling charges; Mars Hydro covers component fees.
DETAILS OF WARRANTY PROCEDURES
- A. DIY Repair: Mars Hydro sends needed components along with tracking number and provides the repair instructions from an engineer.
- B. Repair Center: Mars Hydro provides an RMA and address of the repair center. You ship back the light with the RMA written on the package box. The repair center receives and fixes the light accordingly, usually takes 3-10 days.
German:
- If your product has a problem, contact our customer service. We will help you solve the problem.
- Grow lamp has a 5-year warranty.
- Within 1 year: Free repair and shipping.
- 1 year - 5 years: You pay shipping and repair costs; Mars Hydro covers component costs.
Spanish:
- If your product has a problem, contact us. We will help you solve the problem.
- Our plant lamp has a 5-year warranty.
- Within 1 year: Free repair and transport.
- 1 year - 5 years: You pay round trip costs, repairs, and shipping costs; Mars Hydro covers parts.
French:
- If your product has any problem, contact our customer service, we will help you solve the problem.
- The grow lamp has a 5-year warranty.
- Within 1 year: Free repair and shipping.
- 1 year - 5 years: You pay round trip shipping, repair, and handling fees; Mars Hydro covers component costs.
Japanese:
- For product malfunctions, contact customer service.
- Mars Hydro products have a 5-year warranty.
- Within 1 year from purchase: Free parts exchange, free round trip shipping, free repair.
- From the 2nd to the 5th year: Parts are provided free of charge by Mars Hydro. Round trip shipping, repair fees, and handling fees are borne by the customer.