VEVOR LK-S802-8 Soundbar

Affordable. Reliable. Home Improvement.

Product Information

Model: LK-S802-8

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Technical Support and E-Warranty Certificate: www.vevor.com/support

Remote Control Description

Using the remote control:

01. POWER: Press this button to power on or power off.
02. MODE: Press this button to switch the mode within Bluetooth, USB, Aux-in, HD-in(ARC-in).
03. VOL+: Press VOL+ to up the volume of the soundbar.
04. 144: Under Bluetooth and USB mode, press this button will go to previous song.
05. MOVIE: Press this button will enter MOVIE mode sound effect.
06. PAIR: Under Bluetooth mode, press this button will disconnect the connection between sound bar and sound sourcing device (such as your mobile phone), press this button will reconnect the previous sourcing device again.
07. RESET: Press this button will resume the factory sound setting.
08. MUTE: Under work mode, press this button to turn off sound of soundbar, press it again to turn on the sound.
09. II: When playing music, press this button to pause playing, and repress to play continue.
10. : Under Bluetooth and USB mode, press this button will go to next song.
11. VOL-: Press VOL- to down it.
12. MUSIC: Press this button will enter MUSIC mode sound effect.
13. NEWS: Press this button will enter NEWS mode sound effect.
14. USB file loop: Controls USB file loop.

Diagram of remote control buttons is provided.

FCC WARNING

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Ultimate Advantage

Use the latest decoding chip, Bluetooth 5.0+, supporting fast connection.
Mobile design, ushering in a new era of Bluetooth speakers with excellent sound quality that stands out from the crowd.
Can be matched with personal computers MP3, And audio devices such as mobile phones equipped with a 3.5mm stereo audio input interface.
It can automatically remember the song number after shutting down.

Product features

Wide frequency range
Balanced sound field calibration
Unit material upgrade
Stable signal transmission
High resolution sound quality
Long term stable use
Optimization of heat dissipation structure
Quick Connect
Low distortion performance
Suitable for adapters
Rich and complete functions
High efficiency drive

Soundbar Panels

FRONT:

1. Press to switch the LED lighting mode.
2. VOL-/ Volume down (long press)/Previous (short press).
3. II Pause/Play. In Bluetooth mode, long press to disconnect Bluetooth.
4. VOL+/ Volume up (long press)/Next (short press).
5. /MODE Power On/Off (long press); Mode (USB, TF, AUX)(short press).

BACK:

1. DC 16V DC 16V = 2A (Power Port).
2. Indicator light for Playing
3. AUX Port Audio input.
4. TF (Micro SD Card) Port for TF keys (32 GB maximum).
5. USB Flash Drive Port for USB keys (32 GB maximum).
6. COAXIAL COAXIAL input on the soundbar to COAXIAL Output of other devices (Blu-ray/DVD player/Gaming consoles). If using COAXIAL cable to connect speaker, through the mode button on the remote control or the Power/Mode key on the side plate to select 'COAXIAL', screen displays 'COA'.
7. HD/ARC Can be connected to a TV using the HD/ARC port. If using an HD/ARC cable to connect the speaker, select 'HD' through the mode button on the remote control or the Power/Mode key on the side panel. The screen will display 'ARC' accompanied by 'ARC' prompt.

Bluetooth Mode

Press the 'MODE' button repeatedly till Bluetooth Mode is selected and Soundbar shows "BT" on its LED screen.
On Bluetooth enabled devices, select the Bluetooth model of the device. The display screen will flash, indicating that it is waking up. After successful pairing, the indicator light will continue to light up, the display screen will show "BT" and stop flashing.
Now you can play music from your Bluetooth-enabled device on the soundbar.
Press or buttons on the remote control to play previous or next song.

AUX Input

If using the AUX cable, connect the speaker to audio source and select 'AUX' by using the Mode key on the remote control or the Power/Mode key on the side panel. 'AUX' will be displayed on the display accompanied by 'AUX' prompt.

USB Input

Plug in supported flash drive to play is USB mode.

Connection schematic

RECOMMENDED PLACEMENT

Diagram showing soundbar placement under a TV or in front of a TV.

Solutions to common problems

Problem	Causes and Solutions
Bluetooth pairing failed	Cause 1: The speaker is not in Bluetooth mode. Cause 2: The speaker Bluetooth is automatically connected to other devices. Solution: Press the "M" key to select Bluetooth mode. If other devices automatically connect, long press "D" to disconnect the Bluetooth connection, then turn on the phone's Bluetooth and reconnect.
Speaker sound is too small	Cause 1: The volume of the speaker is too low. Cause 2: The volume of the phone is too low. Solution: Please increase the speaker and phone volume.
Music playing staccato	Cause 1: The Effective distance between the speaker and the mobile phone may be more than 10 meters. Cause 2: There are obstacles between the speaker and the mobile phone. Solution: If it is the above reasons, please shorten the effective distance between the speaker and the mobile phone. If not, please reconnect to Bluetooth.
Speaker doesn't	Cause 1: The speaker may have run out of power. Cause 2: Bluetooth is not connected. Cause 3: The volume of the speaker may not be turned on, or the volume of the mobile phone may not be turned on. Solution: Please turn on the speaker again after fully charged, reconnect Bluetooth, increase the volume of the speaker and the phone.

If the fault persists after the above inspection, please contact the nearest local maintenance department! VEVOR's product technology is constantly upgrading, and we will not notify you separately of changes in product specifications and features!

Important safeguards

For Soundbars that are suitable for power supply, they are more inclined towards indoor activities such as home use, film and entertainment. Please connect the power adapter before indoor use to ensure that the machine can play and use normally indoors.

Note: The Chinese text at the bottom of the page translates to "Discount size: 105*148MM 105g double copper front and back single black printing accordion fold".

	VEVOR LK-SS825-8 Soundbar User Manual Comprehensive guide for the VEVOR LK-SS825-8 Soundbar, covering setup, operation, remote control functions, troubleshooting, and technical specifications. Learn how to connect, use Bluetooth, AUX, and USB modes for an enhanced audio experience.
	VEVOR Sound Bars LK-S819-4, LK-S707-6, LK-S810-9 User Manual User manual for VEVOR Sound Bars models LK-S819-4, LK-S707-6, and LK-S810-9, covering setup, operation, features, and troubleshooting.
	VEVOR Soundbar LK-S819-4/LK-S707-6/LK-S810-9 User Manual This user manual provides instructions for operating the VEVOR Soundbar models LK-S819-4, LK-S707-6, and LK-S810-9. It covers remote control functions, panel operations, Bluetooth, AUX, and HD/ARC input modes, as well as troubleshooting tips.
	VEVOR Manual Meat Grinder User Guide - Models C#8, #5, #8, S#5, S#8, S#10, S#12 Comprehensive user manual for VEVOR meat grinders, covering models C#8, #5, #8, S#5, S#8, S#10, S#12. Includes setup, operation, cleaning, maintenance, and troubleshooting tips for efficient meat grinding, sausage making, and cookie preparation.
	VEVOR Heavy-Duty Cable Crimper User Manual User manual for the VEVOR Heavy-Duty Cable Crimper, including product information, structure, usage guide, and maintenance instructions. Covers models HX-50B and LK-60A.
	VEVOR Auger Drill Bit - Technical Specifications and Instructions Comprehensive guide to VEVOR Auger Drill Bits, including model specifications, weights, colors, accessories, and detailed operating instructions for efficient soil augering and planting.
	VEVOR Ratchet Style Load Binder User's Manual This comprehensive user manual from VEVOR details the operation, safety, and maintenance of the Ratchet Style Load Binder. It is designed to guide users through proper usage, inspections, and installation for models including JL5/16-3/8-02P, JL3/8-1/2-02P, and JL3/8-1/2-04P. Discover essential safety instructions, product specifications, and troubleshooting tips to ensure the secure and efficient performance of your VEVOR load binders. VEVOR is dedicated to providing reliable tools for various applications. For additional support and resources, please visit the official VEVOR support page at www.vevor.com/support.
	VEVOR Air Heater KW 2.0/5.0/8.0 Manual - Installation, Operation, and Maintenance Guide Comprehensive manual for VEVOR Air Heater models KW 2.0, 5.0, and 8.0 (XL-AIRD3, XL-AIRD5). Covers installation, operation, technical specifications, troubleshooting, and maintenance for 12V and 24V systems.