Melitta Molino Coffee Grinder

Introduction

Thank you for choosing the Melitta Molino coffee grinder. We hope you enjoy using it. For further information or questions, please contact Melitta or visit their website.

Product Identification

The grinder features several key components:

• A: Hopper Lid: Covers the bean container.
• B: Removable Grinding Wheel: The part that grinds the coffee beans.
• C: Cup Setting Dial: Adjusts the amount of coffee to be ground based on the number of cups.
• D: On/Off Button: Starts and stops the grinding process.
• E: Bean Hopper and Grinding Chamber: The main body where beans are stored and ground.
• F: Grind Setting Dial: Adjusts the coarseness of the grind.
• G: Grinder Chute: Where the ground coffee exits.
• H: Base: The main housing of the grinder.
• I: Ground Coffee Container Lid: Covers the container for ground coffee.
• J: Ground Coffee Container: Collects the ground coffee.

For Your Safety

The appliance complies with all valid European directives and has been tested and certified by independent institutes. Always read safety notes and operating instructions carefully to avoid danger. Melitta is not liable for damage caused by ignoring these instructions.

Key Safety Points:

• Read the manual before first use.
• The appliance is for household use only.
• Connect only to a properly installed, grounded socket.
• Disconnect from power before cleaning or when not in use for extended periods.
• Check the grinding chamber for foreign objects before use.
• Do not remove the hopper lid until the grinding wheel has completely stopped.
• Keep fingers and hands away from the grinding wheel and chute during operation.
• Do not let the power cord hang freely or touch hot surfaces.
• Do not use if the power cable is damaged.
• Never immerse the appliance in water. Do not use abrasive cleaners, harsh solutions, or hard brushes.
• Do not put any parts in the dishwasher.
• Use a soft brush for cleaning the grinding wheel; do not use water or soap.
• This appliance is not for use by children. Keep out of reach of children.
• The appliance can be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, if supervised or instructed on safe use and potential dangers.
• Children must not play with the appliance.
• Power cable replacement and repairs should only be done by Melitta customer service or an authorized workshop.
• Using unrecommended attachments may cause fire, electric shock, or injury.

Before First Use

• Remove all packaging.
• Clean the housing, grinding chamber, ground coffee container, and lid before first use. (Remnants from manufacturing checks may be present).
• Ensure the ground coffee container/lid and hopper lid are correctly positioned. The grinder will not operate unless these are properly in place.
• The grinder is exclusively for coffee beans. Ensure no foreign objects are present.
• Check that your home's power supply matches the appliance's rating plate.
• Connect the appliance to a power source.

Using the Coffee Grinder

• Ensure the appliance is connected to power.
• Remove the hopper lid (1).
• Fill the grinding chamber with coffee beans (max. 200g). Only use coffee beans in the hopper (2). ATTENTION: Unsuitable coffee types (freeze-dried, caramelized) can clog the grinder. Do not use ground coffee.
• Replace the hopper lid (3).
• Use the grind setting dial (F) to adjust coarseness (1 = finest, 17 = coarsest). The dial should be readjusted during grinding.
• Use the cup setting dial (C) to select the number of cups (2-14 cups).
• Press the ON/OFF button (D) to start grinding (6). Ground coffee collects in the container (J). NOTE: Avoid overfilling the container to prevent blockages.
• The grinder stops automatically when the selected amount is ground.
• If a high-pitched noise occurs, beans may be stuck. Turn off the appliance, unplug it (7), and clean the grinder as per section 5.
• Remove the ground coffee container (J) when grinding is finished (8). Tap gently to reduce static. Remove the container lid.
• Your freshly ground coffee is now ready.

Tips for Best Use

• Store coffee beans in an airtight container for optimal flavour.
• Grind only the required amount of beans just before brewing, as ground coffee loses flavour and aroma quickly when exposed to air.
• Clean the grinder after each use (see section 5).
• If the appliance does not switch on after use, it may be due to a thermal fuse. Unplug and let it cool for 5 minutes.
• The required amount of ground coffee depends on bean type, grind setting, and cup size. Experiment to find your personal preference. Melitta recommends 6-8g of coffee for a medium grind.
• If espresso brews too fast in your machine, lower the grind setting.

Recommended Grind Settings:

Cleaning the Coffee Grinder

ATTENTION: Disconnect the power plug before cleaning (7).

• Remove the ground coffee container with lid (8) and the hopper lid (1).
• Wash the container, its lid, and the hopper lid in warm water, rinse, and dry completely.
• Clean the housing with a soft, damp cloth.
• Clean the grinder mechanism with the provided brush (9).
• Remove any remaining beans from the bean container. Turn the grind setting dial (F) to 1. Place fingers along the ridges at the top of the removable grinding wheel (B). Turn the wheel clockwise until it stops. Lift it out of the grinding chamber and clean the grinding disc with the brush (10, 11).
• After cleaning, replace the grinding wheel. Turn it counter-clockwise until "17" appears on the grind setting dial (F).
• NOTE: Never immerse the grinder base, cord, plug, or grinding wheel in water or other liquids. Never put the appliance or removable parts in the dishwasher.

Notes on Disposal

Appliances marked with this symbol are subject to the European WEEE directive (Waste Electrical and Electronic Equipment). Electric appliances should not be disposed of in household waste. Dispose of the appliance environmentally responsibly using suitable collection systems. Packaging materials are raw materials and can be recycled; please recycle them.

Technical Data

Detailed technical data can be found via the following link.

Warranty Information

The manufacturer's guarantee conditions vary by country. Please refer to the specific warranty information provided for your region.

Warranty Summary (General):

• DE: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes damage from improper use, unauthorized repairs, and wear parts.
• GB: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• FR: Manufacturer's guarantee for 2 years, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• NL: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• IT: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• ES: Manufacturer's guarantee for 3 years, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• DK: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• SE: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• NO: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• FI: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• PL: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• CZ: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.
• SK: Manufacturer's guarantee for 24 months, covering material or manufacturing defects. Excludes improper connection, handling, unauthorized repairs, and non-compliance with instructions. Wear parts and fragile parts like glass are excluded.