Siemens IWLAN RCOAX Cable 5 GHz
Product Type Designation: IWLAN RCOAX Cable PE 1/2" 5 GHz
Article Number: 6XV1875-2D
Product Description
IWLAN RCoax Cable PE 1/2" 5 GHz for short distances. Extended temperature range -40 °C/+85 °C. Sold by the meter, minimum order quantity 20 m. Maximum supply unit: 1000 m.
Application
Suitable for suspended monorails (electrified railways), cranes, stacker cranes, etc. This cable is water-repellent, weather-resistant, and resistant to microbes. It also shows high resistance to many cleaning and disinfecting agents (e.g., hypochlorites, chlorine dioxide, peracetic acid (1% solution), and quaternary ammonium cations). Cleaning with a high-pressure cleaner is possible up to a maximum of 50 bar.
Radio Frequencies
Frequency Range
Usage: With WLAN in the 5 GHz frequency band
Frequency: 5.15... 5.85 GHz
Electrical Data
Impedance
Value: 50 Ω
Attenuation per Length
| Condition | Attenuation (dB/m) |
|---|---|
| With 5.15 GHz / with cable mounting 10 mm over concrete / at 20 °C | 0.23 dB/m |
| With 5.15 GHz / with cable mounting 15 mm on aluminum rail / at 20 °C | 0.24 dB/m |
| With 5.85 GHz / with cable mounting 10 mm over concrete / at 20 °C | 0.24 dB/m |
| With 5.85 GHz / with cable mounting 15 mm on aluminum rail / at 20 °C | 0.27 dB/m |
Decoupling Attenuation
| Condition | Attenuation (dB) |
|---|---|
| With 5.15 GHz / at 20 °C | 42 dB |
| With 5.85 GHz / at 20 °C | 40 dB |
Observation: c(50) applies at a distance of 10 cm between antenna and cable
Capacitance per Length
Value: 76 pF/m
DC Resistance per Length
| Component | Resistance (Ω/km) |
|---|---|
| Internal conductor / at 20 °C | 1.48 Ω/km |
| Outer conductor (coaxial) / at 20 °C | 2.8 Ω/km |
Relative Speed
Value: 88 %
Mechanical Data
Outer Diameter
| Component | Diameter (mm) |
|---|---|
| Internal conductor | 4.8 mm |
| Dielectric | 12.4 mm |
| Cable jacket | 15.5 mm |
Cable Jacket Thickness
Value: 1.3 mm
Material
- Internal conductor: Copper-clad aluminum
- Dielectric: Foamed polyethylene
- Outer conductor (coaxial): Overlapping copper tape with grooved seams, bonded to the cable jacket
- Cable jacket: Halogen-free polyolefin
Color of Cable Jacket
Value: Pastel turquoise
Bending Radius
Value: Not specified
Additional Technical Data
Mechanical Stress
- Single bending / min. permissible: 200 mm
- Number of bending cycles: 1
- Tensile stress / max.: 1100 N
- Weight per length: 0.232 kg/m
- Fixing distance / recommended: 0.5 m
Environmental Conditions
Ambient Temperature
- During operation: -40 ... +85 °C
- During storage: -70 ... +85 °C
- During installation: -25 ... +60 °C
Product Property: UV-resistant: Yes
Standards, Specifications, Approvals
Norms
- For behavior in case of fire:
- Corrosive gas emission: IEC 60754-2
- Smoke emission: IEC 60332-1 and IEC 60332-3 cat. C
- Flame propagation: IEC 61034
Certificates of Suitability
- UL approval: Yes
- RF approval: Yes
RF Approval: Specific country approvals can be found at www.siemens.com/funkzulassungen
Reference Designations
According to IEC 81346-2:2019: TFB
Additional Information / Internet Links
Internet Links
Safety Information
Siemens offers industrial cybersecurity products and solutions to enhance the security of operations, systems, machines, and networks. To protect installations, systems, machines, and networks against cyber threats, a comprehensive and holistic industrial cybersecurity concept that is state-of-the-art must be implemented and continuously maintained. Siemens products and solutions are part of this concept. Customers are responsible for preventing unauthorized access to their installations, systems, machines, and networks. These systems, machines, and components should only be connected to the corporate network or the Internet when and to the extent necessary, and only if appropriate protective measures (e.g., firewalls and network segmentation) have been taken. For additional information on industrial cybersecurity measures that can be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens products and solutions are subject to continuous development to make them more secure. Siemens strongly recommends performing updates as soon as they are available and using only the latest versions of the products. The use of older or unsupported product versions and the failure to apply new updates may increase the risk of cyber threats. To stay informed about product updates, it is recommended to subscribe to the Siemens Industrial Cybersecurity RSS Feed at https://www.siemens.com/cert. (V4.7)
