Manuals+

TronTracker BC10 Dual Charger

Quick Start Manual

Brand: Jotron

1a Table Mounting

Place the charger in a suitable indoor location, protected from water splashes. Secure it to the table by using two screws in the holes as indicated. The hole diameter is 4.8 mm.

Diagram shows the charger with two mounting holes on top, secured by screws to a surface. Dimensions indicate 95 mm width.

1b Wall Mounting

The charger can also be mounted on a wall. Use two screws with a maximum diameter of 4.5 mm for the upper holes and two screws with a maximum diameter of 3.5 mm for the lower holes. (Wood screws with a diameter of 4.5 mm can be used for all four holes).

  1. Step 1: Insert the upper screws on the wall before placing the charger. The charger can be used as a template.
  2. Step 2: Slide the charger up against the wall so that the screws enter the slots in the charger. Make sure there is a tight fit between the screws and the charger.

    Diagram shows a red arrow indicating the charger sliding upwards onto wall-mounted screws.

  3. Step 3: Secure the charger to the wall by inserting the two lower screws.

Diagram shows the charger mounted on a wall. Dimensions indicate 95 mm width, 58 mm height, and 105 mm base width.

2 Power Connection

The power connection and an indicator is located on the left side of the charger. The green indicator will light up when the charger is powered.

Connect the charger to the ship's power supply (12-24 V DC). The ribbed wire is the negative terminal and the center pin is the positive terminal. Plug the connector into the hole on the side of the charger. Feed the cable into the clip at the bottom for strain relief. The cable can also be routed through the groove under the charger.

Diagram shows the left side of the charger with a power connector and a green indicator light.

3 Charging the Tracker

The Dual Charger can charge two Trackers simultaneously. Place the Tracker in the charger and rotate to lock it.

Diagram shows a yellow Tracker being inserted into the charger and rotated to lock. A red arrow indicates the insertion direction.

4 Indicator Descriptions

While charging, the indicator on the Tracker will show the charging status.

A red light indicates that the Tracker is not charging. This typically occurs if the battery temperature is outside the charging range of +5°C to +40°C.

Models: BC10 Tron Tracker Dual Charger, BC10, Tron Tracker Dual Charger, Tracker Dual Charger, Dual Charger

PDF preview unavailable. Download the PDF instead.

106133 TronTracker BC10 Dual Charger Quick Start Manual A (EN) Adobe PDF library 17.00 Adobe Illustrator 29.7 (Windows)

Related Documents

Preview Jotron TronTracker System for Fishing Buoys
Jotron TronTracker system provides precise and efficient fishing buoy tracking, enabling quick gear retrieval, reducing gear loss, and supporting sustainable fishing practices. The system includes a tracker, receiver, and charger, compliant with maritime regulations.
Preview EU-Type Examination Certificate for Jotron TronTracker Fishing Buoy Locator System
This EU-Type Examination Certificate confirms that the Jotron TronTracker Fishing Buoy Locator System, including the RA10 Receiver, TA10 Tracker, and BC10 Dual Charger, meets the requirements of Directive (EU) 2014/53/EU (RED).
Preview Manual de Inicio Rápido TronTracker BC10 Dual Charger | Jotron
Guía de inicio rápido para el Jotron TronTracker BC10 Dual Charger, cubriendo montaje en mesa y pared, conexión de alimentación, instrucciones de carga y estado de los indicadores.
Preview Jotron TronTracker Declaration of Conformity
Declaration of Conformity for the Jotron TronTracker fishing buoy locator system, confirming compliance with essential European and UK standards and directives.
Preview TronTracker BC10 Dual Charger Hurtigstartveiledning
Hurtigstartveiledning for Jotron TronTracker BC10 Dual Charger, som dekker montering, strømtilkobling, lading og indikatorbeskrivelser.
Preview TronTracker TA10 Tracker Quick Start Manual | Jotron
Get started quickly with the Jotron TronTracker TA10 Tracker. This guide covers installation, activation, app setup, and charging for your marine tracking device.
Preview Jotron TronTracker RA10 Receiver: Quick Start Installation and Setup Guide
This quick start guide provides essential information for installing and setting up the Jotron TronTracker RA10 Receiver. It covers physical installation, electrical and antenna connections, mobile app integration, and initial device configuration for marine navigation systems.
Preview Jotron TronTracker RA10 Receiver Quick Start Guide
This quick start guide provides essential information for installing and configuring the Jotron TronTracker RA10 Receiver. It details connection procedures for NMEA 0183, LAN, power, and VHF antenna, along with steps for downloading and using the TronTracker mobile application for initial setup and device pairing.