Artificial Christmas Tree User's Manual
Models: CM22054, CM22056, CM22058
Contact Us!
Do NOT return this item. Contact our friendly customer service department for help first.
- US: cs.us@costway.com ✉️
- UK: cs.uk@costway.com ✉️
- AU: cs.au@costway.com ✉️
Before You Start
⚠️ Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Hardware
| Item | Description | Quantity |
|---|---|---|
| 1 | SCREW | x3 |
| 2 | CAP | - |
NOTE: Please remove the circular protector caps on the end of each pole before assembling. If the caps were broken, they will not affect the use of the product.
≥6FT Tree Parts
- A BOTTOM SECTION OF TREE: The largest, base section of the tree, featuring dense branches.
- B MIDDLE SECTION OF TREE: The middle section of the tree, featuring dense branches.
- C TOP SECTION OF TREE: The uppermost section of the tree, featuring dense branches.
- D BASE: The stand for the tree. (Two identical bases are provided for stability).
NOTE: ≥6FT trees have 3 sections. In addition to top and bottom sections, the trees also have a middle section. 5FT trees have 2 sections which are top and bottom sections.
5FT Tree Parts
- a BOTTOM SECTION OF TREE: The largest, base section of the tree, featuring dense branches.
- b TOP SECTION OF TREE: The uppermost section of the tree, featuring dense branches.
Product Assembly
Diagram showing the assembly of the ≥6FT tree and the 5FT tree. The ≥6FT tree is depicted with three sections stacked vertically on a metal base. The 5FT tree is shown with two sections stacked vertically on a similar metal base.
Branch Arrangement
Spread out the branches of the tree and rearrange them to your preference.
Cleaning & Storage
- Store this tree in a cool and dry place away from heat and moisture.
- Before putting this tree in storage, perform the following steps:
- Completely remove all decorations.
- Clean the tree with a slightly damped cloth and let it dry naturally.
- Raise all branches to their original upright position, ensuring not to damage any branches in the process.
Caution
- Firmly secure all screws before use.
- Product is intended for indoor use only.
- Do not place this tree in a wet location.
- This seasonal product is not intended for permanent installation or use.
- Do not use or store this item in the proximity of open flame, flammable/combustible chemicals, or other strong heat sources.
- If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way that is inconsistent with the manufacturer's instructions.
