7-IN-1 WORKBENCH

▶️ Search YouTube for "LEADALLWAY 7 in 1 Workbench Portable install video"

TECHNICAL SPECIFICATIONS

Work platform size:

• 108.5 x 54.5 x 15.5 cm
• 42.7 x 21.5 x 6.1 Inch

Work height:

• 52/78 cm
• 20.5/30.7 Inch

Loading capacity:

• Workbench / Saw Horse mode: 150Kgs/330Lbs
• Scaffold / Platform mode: 250Kgs/550Lbs
• Car Creeper & Dolly mode: 150Kgs/330Lbs
• Hand Truck mode: 150Kgs/330Lbs

Net weight: 13.5Kgs / 29.8Lbs

⚠️ WARNING!

Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification. We strongly recommend this machine not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted the distributor to determine if it can or should be performed on the product.

INTENDED USE

The workbench is the ultimate 7-in-1 portable workbench, sawhorse, scaffold, platform, car creeper, dolly and hand truck. The item can be transformed easily between different modes by following the instruction manual. This product is intended for DIY and light trade use.

1/ GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury.

CAUTION: Do not allow persons to operate or assemble this workbench until they have read this manual and have developed a thorough understanding of how the unit works.

WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

SAVE THESE INSTRUCTIONS.

2/ IMPORTANT SAFETY CONSIDERATIONS

FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT AND/OR SERIOUS INJURY TO YOU!

• Make sure all moving parts are free from interference.
• Keep hands clear of all moving parts.
• Ensure workbench is used in a dry place, protected from rain. The product is for INDOOR use only. Do not store or use it outdoors or in a moist environment.
• Keep work area well lit.
• Be aware of over balancing. When using this product in all modes, please keep your body or a heavy object in the centre or surface to avoid overbalance. Incorrect usage may cause it to turn over and result in personal injury.
• When transporting the workbench in a vehicle, always tie down to prevent movement and possible damage.
• Check to make sure that all fixing screws and knobs are tight and all legs are locked into position before operating the workbench.
• DON'T USE SCAFFOLD/PLATFORM MODE WITH LEGS FULLY EXTENDED. Always use this product on a stable, level surface. Failure to use properly or overload may result in serious personal injury.
• When using this product with power tools, please refer to the manufacturer's instructions for guidance on usage.
• The product must be used only for its prescribed purpose. Any use other than those mentioned in these instructions will be considered a case of misuse. The manufacturer shall not be liable for any damage or injury resulting from such cases of misuse.
• The manufacturer shall not be liable for any modifications made to the tool or for any damage resulting from such modifications.

3/ ASSEMBLY

Your 7-in-1 workbench comes fully assembled, just take it out of the packaging and follow the simple set up steps, then it's ready to use.

Modes Overview:

• 1. Workbench mode
• 2. Sawhorse mode
• 3. Scaffold mode
• 4. Platform mode
• 5. Car creeper & dolly mode
• 6. Hand truck mode

Workbench Diagram Overview:

The workbench features include: Sawhorse Holes, a Compass, a 2-in-1 Handle, a Tool Tray, a Towing Hole, a Ruler, Universal Wheels with Brakes, Aluminum Legs, Fixed Wheels, and Self Adjusting Leg pads.

a/ Car Creeper & Dolly Mode

Steps to install wheels:

• 1. Locate wheels, gaskets, and screws. Align screws, gaskets, and wheels. Note: 2 universal wheels with brakes go under the tool tray, and 2 fixed wheels on the other side.
• 2. Place a gasket on the screw hole and secure with a screwdriver.
• 3. Rotate the wheel to fix the 4 screws, ensuring wheels are fully secured.
• 4. Repeat steps 1-3 for the remaining 3 wheels.
• 5. Connect a pulling rope to the towing holes to complete the dolly.

TIP: How to install the wheels

Wheel Installation Details:

The 4 wheels are packed in the back of the workbench and require consumer installation. Please observe the following:

• 1. Always use the provided gaskets.
• 2. The set includes 2 universal/steering wheels and 2 fixed wheels, each with specific positions. Refer to the illustration for placement.

Diagram Description: Illustrations show the process of attaching wheels. One diagram shows fixed wheels, another shows universal wheels with brakes. The text explains the use of gaskets and the distinction between universal and fixed wheels.

▶️ Search YouTube for "LEADALLWAY 7 in 1 Workbench Portable install video"

b/ Hand truck mode

Transformation:

• 1. Pull the handle up from the car creeper mode until it stops. The hand truck is now ready.
• 2. Push the two buttons on the handle to retract it.

Diagram Description: Illustrations show the handle buttons used for retracting the handle in hand truck mode.

b/ Scaffold & Platform mode

Setup:

• 1. Release all legs from their locking positions and rotate each pair until they cannot move further.
• 2. Ensure the gusset brace is locked by pulling it up. Repeat for all gusset braces.
• 3. Pull the handle up until it stops. Release the tool tray from its locking position, place it on top of the handle to form a platform. Note: The loading capacity for the tool tray in this mode is 2Kgs (4.5Lbs).
• 4. Hang the hook on the handle to hang tool bags while working on the platform.

Diagram Description: Illustrations show the legs, gusset braces, handle, and the tool tray being positioned to form the platform. A warning is highlighted.

⚠️ WARNING:

DON'T USE SCAFFOLD PLATFORM MODE WITH LEGS FULLY EXTENDED. The inner legs are not designed to be used in this function.

c/ Workbench & Sawhorse mode

Setup:

• 1. Set up the legs following the same steps as the scaffold mode.
• 2. Push the snap buttons on the side of each leg to release them. Pull the inner legs out to the workbench height. Legs will snap into place when fully extended. Gently turn the workbench upright onto a stable, level surface.
• 3. Connect with a quick clamp:
• a. Remove the small plastic part from your quick clamp.
• b. Insert the steel bar into the connector (Fig 2) and secure with a pin in the lock hole, ensuring a firm connection (Fig 3).
• c. Insert the connector into the Sawhorse hole on the workbench surface and rotate at least 30 degrees (Fig 4).
• d. Using the 2 vice pegs on the workbench, a sawhorse is completed.

Diagram Description: Illustrations show the snap button mechanism for leg extension, and a sequence of four steps (Fig 1-4) detailing how to attach a quick clamp connector to create a sawhorse function.

NOTE: DO NOT step on the workbench while the legs are fully extended.

4/ MAINTENANCE

It is recommended that the general condition of any workbench be examined before use. Keep your workbench in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Wipe away dirt and dust from the workbench on a regular basis.