Document Revision History
| 标识 (Mark) | 版本号 (Version No.) | 处数 (Count) | 修改内容 (Revision Content) | 日期 (Date) |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 |
Product Overview
This document provides instructions and specifications for the D30S Smart Mini Label Maker.
A visual representation of the D30S Smart Mini Label Maker, a compact device featuring a power button and indicator light.
01. Packaging List
- Printer: 1 unit
- Product Instruction: 1 unit
- Data Cable: 1 unit
02. Device Parameter
| Product name | Smart Mini Label Maker |
| Product model | D30S |
| Printing technology | Thermal printing |
| Effective printing width | 0.47 inch (12mm) |
| Supported consumables | Continuous paper / Interstitial paper / Black label paper |
| Printing density | Light, standard, dark |
| Printing resolution | 203dpi |
| Printhead service life | 50KM |
| Communication interface | Bluetooth |
| Product size | 3.2*3.2*1.3inch (133.5*80.5*33.5mm) |
| Power input | 5V-2A |
| Power supply method | Micro USB |
| Power input | Lithium battery |
| Supported operating system | Android, iOS |
03. Component Instruction
1. Appearance Introduction
- Release Latch
- Paper Compartment Cover
- Paper Tearing Blade
- Paper Outlet
- Blade
- Decorative Frame
- Indicator Light
- Power Button
- Charging Port
- Sling Hole
2. Functions of the power button
| Operation Method | Functions |
|---|---|
| Press and hold 2s | Turn on/off |
| Double click | Print the content of the last print paper |
3. Power indicator status
| Indicator Light | Status | Description |
|---|---|---|
| Green | Keep on | Normal status (charging) |
| Red | Flash quickly | Powered off & charging |
| Green | Flash quickly | Low battery, high temperature |
| Red | Flash quickly | 5% of battery remaining |
04. Introduction of Paper Roll Installation
- Slide the release latch following the arrow in the direction shown, and open the paper bin cover to about 10 degrees.
- Unpack the label paper and put into the paper bin, then ensure the paper is not out of the paper outlet.
- Close the paper bin cover and slide it to the rightmost until it clicks.
- Long press the ON/OFF button to connect with an APP.
Note: Please select the correct print template to match the label size before edit.
Guideline for label paper positioning: When installing or changing the label paper specifications for the first time, please click the power button to feed the paper. After the printer recognizes the label paper positioning, it starts printing connect with an APP.
05. App Download Guide
1. Search "Print master" on App Store or Google Play to get the app.
2. Or please scan the QR Code to download the App.
[App Store Icon] App Store
[Google Play Icon] Google Play
[Search Icon] Print master
Three Steps to Connect App:
- Open the APP
- Choose Printer Model
- Click "Unconnected" Button to Connect
06. Warranty
Thank you for choosing our Smart Mini Label Maker.
Our warranty provides "Exchange/Return" services within one year of purchase. Please keep the warranty card in a safe location for future reference.
07. FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
08. Warranty / Maintenance Card
Product Instruction
Please read this Instruction carefully before using this product and keep it properly.
| User Information: |
Name: [Text Field] Address: [Text Field] Gender: [Text Field] Phone: [Text Field] |
|
| Product Information: |
Date of purchase: [Text Field] Product order number: [Text Field] Product serial number: [Text Field] |
|
| Reason for Return (Replace/ Repair/ Maintenance) | Fault description: [Text Field] | |
| Fault conditions: [Text Field] | ||
| Maintenance Records: |
Processing situation: [Text Field] Repair ticket number: [Text Field] |
Maintenance staff: [Text Field] Repair date: [Text Field] Date of inspection: [Text Field] |
Technical Specifications and Compliance
Dimension Annotation and Tolerance
| Dimension Annotation | CLASS | CLASS | CLASS | Product Model |
|---|---|---|---|---|
| <6.0 | ±0.5 | ±1 | ±2 | D30S-外贸中性 |
| 6.0~30.0 | ±0.5 | ±1 | ±2 | |
| 30~120 | ±0.5 | ±1 | ±2 | |
| 120~400 | ±0.5 | ±1 | ±2 | |
| 400~1000 | ±0.5 | ±1 | ±2 |
Document Information
| 名称 (Name) | 说明书 (Manual) | 材料 (Material) | 128g铜版纸 (128g Copperplate Paper) | ||||
| 料号 (Part No.) | 颜色 (Color) | ||||||
| 设计 (Design) | 版本号 (Version) | ||||||
| 确认 (Confirmation) | 比例 (Scale) | 1:1 | 单位 (Unit) | mm | 图幅 (Sheet Size) | ||
| 审核 (Approval) | 第三角度投影 (Third Angle Projection) | 第 1 张共 1 张 (Sheet 1 of 1) |
