ZEGUAN P1000 Label Printer User Manual

Product Overview

This document provides comprehensive instructions and essential information for operating and maintaining the ZEGUAN P1000 label printer.

Product Description

The P1000 label printer is equipped with the following key components:

• Power Indicator Lamp: Shows the power status of the device.
• Cutting Button: Used to cut the printed labels.
• Reset Port: Allows for system reset if the machine malfunctions.
• Paper Outlet: Where the printed labels emerge.
• USB Interface: For charging and potential data connection.
• Bluetooth Indicator Lamp: Indicates the status of the Bluetooth connection.
• Power Button: Turns the printer on and off.
• Ink Ribbon: The consumable material used for printing.

Operation Guidance

Charging the Printer

To charge the printer, gently connect the charging cable to the USB interface. Avoid excessive force to prevent damage to the port. Once charging is complete, disconnect the cable.

Powering On

To turn the printer on, press and hold the power button for approximately 3 seconds.

Establishing a Bluetooth Connection

Enable Bluetooth on your host device and search for the printer. The printer should appear as "Print master" or "PQ Print master". Select it to establish a connection.

Utilizing the Cutting Button

The integrated cutting button provides a convenient way to separate printed labels.

Replacing the Ink Ribbon

Follow these steps to replace the ink ribbon:

1. Open the side cover by pulling it outwards.
2. Ensure the new label tape cassette is inserted correctly into its designated slot.
3. Close the side cover securely to complete the ribbon and tape installation.

Cautions and Warnings

General Handling Precautions

• Handle the charging cable with care to prevent damage to the charging port.
• Avoid touching the printer head immediately after use, as it may be hot.
• Exercise caution around the cutting button due to the presence of a sharp blade.

Environmental and Usage Guidelines

• Refrain from charging or operating the printer in environments with high temperatures, high humidity, or significant smoke and dust (e.g., bathrooms, saunas, or areas near open flames).
• Do not expose the device to high-temperature environments.
• Ensure the printer is not immersed in water or exposed to moisture.

Battery Safety Information

• Under no circumstances should the battery be disassembled, short-circuited, exposed to heat, or disposed of in fire.
• If the battery exhibits significant swelling, discontinue use immediately.
• It is critical to replace the battery only with the correct type specified for this model, as using an incorrect battery can pose an explosion risk.
• Do not use the battery if it has come into contact with water.

Troubleshooting

In the event of a machine malfunction, a system reset can be performed by gently pressing the reset port.

FCC Compliance Information

This device has undergone testing and has been found to comply with the established limits for a Class B digital device, as stipulated in Part 15 of the Federal Communications Commission (FCC) Rules. These regulations are designed to offer reasonable protection against harmful radio frequency interference within residential installations.

The equipment generates, utilizes, and can emit radio frequency energy. If it is not installed and operated in strict accordance with the provided instructions, it may cause detrimental interference with radio communications. While compliance is intended, there is no absolute guarantee that interference will not occur in a specific installation. If the equipment does cause harmful interference to radio or television reception, which can be verified by turning the equipment off and on, users are encouraged to attempt to rectify the interference through one or more of the following methods:

• Adjust the orientation or location of the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an electrical outlet on a circuit that is separate from the one used by the receiver.
• Seek assistance from the dealer or an experienced radio/television technician.

Any modifications or changes made to this equipment that have not been explicitly approved by the party responsible for FCC compliance may result in the forfeiture of the user's authority to operate the equipment.

Product Warranty and Service

The after-sales service for this product is administered in accordance with the Consumer Rights Protection Law of the People's Republic of China and the Product Quality Law of the People's Republic of China.

Warranty Coverage

The product is covered by a free repair service for a period of one year, commencing from the date of purchase, as evidenced by the official sales receipt.

Return, Exchange, and Repair Options

Within 7 days of receiving the product, users have the option to return it, exchange it, or opt for free repair services.

Warranty/Maintenance Card Management

It is important to safeguard the warranty/maintenance card, as it is essential for service claims. Provisions may exist for obtaining a replacement if the original card is lost.

Conditions Not Covered by Warranty

The following circumstances will result in repair services being provided on a paid basis:

• When the warranty period has expired.
• If the original purchase receipt and warranty card cannot be presented together, or if the information contained within them is inconsistent.
• If the warranty card's content has been compromised through malicious damage, tearing, or alteration.
• When damage arises from unauthorized repair attempts or disassembly.
• If damage is attributable to human error or negligence.
• In cases of damage resulting from natural disasters, including but not limited to earthquakes, floods, lightning strikes, or external calamities such as fires.
• When damage occurs due to operation in adverse environmental conditions (such as exposure to oily smoke, dust, or direct sunlight) or failure to adhere to the operating instructions outlined in the user manual.

Product Certification and Manufacturing Details

The product has successfully passed all required quality assessments and is certified for distribution and use.

The following manufacturing and specification details are provided:

Further product information includes:

• Product Model: P1000
• Brand: ZEGUAN
• Manufacturer: Zhuhai Zeguan Technology Co., Ltd.
• Document Title: User Manual (说明书)
• Material Specification: 80g Writing Paper
• Part Number: 30400300149
• Design Engineer: Chen Yingxin (Date: 2020-06-24)
• Quality Confirmation: Huang Peixi (Date: 2020-06-24)
• Document Version: A/0
• Audit Engineer: Peng Liyan (Date: 2020-06-24)
• Scale: 1:1
• Unit of Measurement: Millimeters (mm)
• Drawing Sheet Reference: Sheet 1 of 1