Internal Photos

PCB

A circular printed circuit board (PCB) viewed from the top. It features a prominent square System-on-Chip (SoC) at the center, flanked by two large rectangular memory chips. Numerous smaller surface-mount components, capacitors, resistors, and connectors are distributed across the board. A ruler is positioned along the top edge, marked from 0 to 8 units, indicating scale.

Top side of the PCB.

The reverse side of the circular PCB. Two large rectangular components, likely RF modules or power management units, are covered by metallic shielding plates. The underside also contains various smaller electronic components and solder points. A ruler is positioned along the top edge, marked from 0 to 8 units.

Bottom side of the PCB.

The circular PCB viewed from the top, with the RF shielding removed. This view clearly shows the central square SoC and the surrounding memory chips, along with other components. A ruler is positioned along the top edge, marked from 0 to 8 units.

Top side of the PCB without RF screen.

PCB with Shields

The circular PCB viewed from the bottom, with metallic RF shielding plates covering significant portions of the board. The shields are silver-colored and have a brushed metal finish. A ruler is positioned along the top edge, marked from 0 to 8 units.

Bottom side of the PCB with shields.

The circular PCB viewed from the top, with metallic RF shielding plates covering significant portions of the board. The shields are silver-colored and have a brushed metal finish. A ruler is positioned along the top edge, marked from 0 to 8 units.

Top side of the PCB with shields.

Bottom Assembly

The interior of the circular bottom housing. It contains a large, circular coil, possibly for wireless charging or NFC communication, covered by a mesh. Some black insulating material and internal wiring are also visible. A ruler is positioned along the top edge, marked from 0 to 9 units.

Inside view of the bottom assembly.

The exterior of the circular bottom housing. The surface is black and matte. Textual markings are present, including: 'Designed in Denmark', 'Assembled in Europe', the 'AIRTAME' logo, a MAC address ('38:48:76:08:00:06'), a serial number ('1182685-000040'), 'FCC ID: 2ADEFTAT-DG2', 'IC: 12460A-ATDG2', and regulatory compliance marks ('FC', 'CE', 'RoHS').

Outside view of the bottom assembly.

Top Assembly

The exterior of the circular top housing. The surface is black and matte, featuring a prominent, translucent white circular light indicator on its surface. A ruler is positioned along the top edge, marked from 0 to 9 units.

Outside view of the top assembly.

The interior of the circular top housing. It shows mounting points for the PCB and other internal structures. Some black plastic clips and internal wiring are visible. A ruler is positioned along the top edge, marked from 0 to 8 units.

Inside view of the top assembly.

Top Assembly with PCB

A view of the top assembly with the circular PCB installed inside. The PCB is partially covered by a metallic shielding plate. The overall structure shows how the PCB fits within the top housing. A ruler is positioned along the top edge, marked from 0 to 8 units.

Top assembly with PCB.

Assembled Device

A side profile view of the fully assembled, circular Airtame device. It displays the various ports on the device's edge: a USB-C port, a micro-USB port, and a smaller auxiliary port. Also visible are a Kensington security slot for theft prevention and a small, circular reset button.

Side view of the assembled device, showing inlet ports, Kensington slot, and reset button.

The top view of the fully assembled, circular Airtame device. The device has a black, matte finish and features a distinctive white circular light indicator on its surface. A ruler is positioned along the top edge, marked from 0 to 9 units.

Top view of the assembled device.

The bottom view of the fully assembled, circular Airtame device. The surface is black and matte. Textual markings are present, including: 'Designed in Denmark', 'Assembled in Europe', the 'AIRTAME' logo, a MAC address ('38:48:76:08:00:06'), a serial number ('1182685-000040'), 'FCC ID: 2ADEFTAT-DG2', 'IC: 12460A-ATDG2', and regulatory compliance marks ('FC', 'CE', 'RoHS').

Bottom view of the assembled device.