MTD 450 Series Rear Tine Tiller Illustrated Parts Manual
Form No. 769-05488 (January 15, 2010)
Manufacturer: MTD LLC
Handle & Tine Shield
Exploded view diagram of the Handle & Tine Shield assembly. This section details components such as the upper and lower handle tubes, tine shield, various mounting brackets, screws, nuts, washers, grips, and adjustment mechanisms.
Ref. | Part Number | Description |
---|---|---|
1 | 747-1152 | Shaft Rod |
2 | 649-0034-0691 | Lower Handle Tube Assembly-Black |
649-0034-0638 | Lower Handle Tube Assembly-Red | |
3 | 649-0041-0691 | Upper Handle Assembly-Black |
649-0041-0638 | Upper Handle Assembly-Red | |
4 | 710-0946 | Screw, 1/4-20 x 0.625 |
5 | 710-3005 | Hex Head Screw, 3/8-16:1.25 |
6 | 710-3056 | Hex Head Screw, 5/16-18 x 3.25 |
7 | 911-0415 | Clevis Pin, .375 X 1.75 |
8 | 712-0324 | Hexlock Nut, 1/4-20 |
9 | 712-0379 | Flangelock Nut, 3/8-24 |
10 | 912-0429 | Hexlock Nut, 5/16-18 |
11 | 714-0147 | Cotter Pin, .125 X 1.75 INTERNAL |
12 | 720-0210A | Small Tee Knob |
13 | 720-0278A | Foam Grip, .970 x 11.0 |
14 | 720-0313 | Grip, .1875 x 1.00 |
15 | 726-0273 | Battery Clamp, 5/16 |
16 | 726-0317 | Cable Tie, 8.5 LG |
17 | 735-0246A | End Plug |
18 | 936-0117 | Washer, Flat, .385 x .620 x .033 |
19 | 736-0242 | Washer, Bell, .340 x .872 x .060 |
20 | 736-3090 | Washer, Flat, .260 x .720 x .060 |
21 | 938-0958 | Spacer, Shoulder, .50 x .190 x .360 LG |
22 | 747-1219-0637 | Clutch Bail |
23 | 784-0190 | Handle Adjustment Crank |
24 | 784-0191 | Hex Nut Retainer Bracket |
25 | 786-0120-0637 | Tiller Depth Control |
26 | 786-0181-0691 | Shaft Rod Lever-Black |
786-0181-0638 | Shaft Rod Lever-Red | |
27 | 735-0127 | Washer, Rubber, .33 ID x .87 OD x .125 |
28 | 914-0104 | Cotter Pin, .072 x 1.12 LG |
29 | 686-0044B-0691 | End Cover Assembly-Black |
686-0044B-0638 | End Cover Assembly-Red | |
30 | 710-0176 | Hex Head Screw, 5/16-18 x 2.75 |
31 | 710-3008 | Hex Head Screw, 5/16-18 x .75 |
32 | 710-3022 | Hex Head Screw, 3/8-16 x 2.75 |
33 | 710-04482 | Hex Head Flange, 3/8-16 x .875 |
34 | 712-04063 | Flangelock Nut, 5/16-18 |
35 | 712-04065 | Flangelock Nut, 3/8-16 |
36 | 712-0421 | Wing Nut, 5/16-18 W/ Bell Washer |
37 | 926-0106 | Speed Nut Cap, 1/4 ROD |
38 | 736-0204 | Washer, Flat, .344 x .62 x .033 |
39 | 938-0849 | Screw, Hex, 5/16-18 x .75 |
40 | 747-0432 | Tiller Flap Rod |
41 | 750-0885A | Spacer, .322 x .625 x 2.00 |
42 | 786-0090A-0691 | Side Shield-Black |
786-0090A-0638 | Side Shield-Red | |
43 | 786-0113A-0691 | Rear Tine Shield-Black |
786-0113A-0638 | Rear Tine Shield-Red | |
44 | 786-0176-0691 | RH Handle Mount Bracket-Black |
786-0176-0638 | RH Handle Mount Bracket-Red | |
45 | 786-0177-0691 | LH Handle Mount Bracket-Black |
786-0177-0638 | LH Handle Mount Bracket-Red | |
46 | 786-0178A-0691 | Tine Shield-Black |
786-0178A-0638 | Tine Shield-Red | |
47 | 786-0179-0637 | FRT Tine Shield Bracket |
48 | 786-0180-0637 | FRT Tine Shield Spacer Bracket |
49 | 710-0382 | Hex Head Screw, 1/2-13 x 5.00 |
710-0506 | Hex Head Screw, 1/2-13 x 5.50 | |
50 | 912-0206 | Hex Nut, 1/2-13 |
712-3066 | Hex Nut, 1/2-20 | |
51 | 936-0921 | Washer, Lock, 1/2 |
52 | 731-1595 | Counterweight |
53 | 936-0179 | Washer, Flat, 1/2 x 1.25 x .100 |
54 | 710-0376 | Hex Head Screw, 5/16-18 x 1.00 |
55 | 750-0194 | Hub, .636 ID x 1.00 OD x .94 |
Drive System
Exploded view diagram of the Drive System. This section covers components like the belt cover, pulleys, belts, idler brackets, wheels, shaft covers, and associated fasteners and hardware.
Ref. | Part Number | Description |
---|---|---|
1 | 686-0111-0637 | Belt Cover Bracket Assembly |
2 | 710-1039 | Hex Head Screw, 3/8-24 x 1.00 |
3 | 710-0237 | Hex Head Screw, 5/16-24 x .625 |
4 | 710-0412 | Hex Head Screw, 1/4-28 x .75 |
5 | 710-0502A | Screw, 3/8-16 x 1.250 |
6 | 710-0599 | Screw, 1/4-20 x 0.500 |
7 | 710-3005 | Hex Head Screw, 3/8-16 x 1.25 |
8 | 710-0805 | Hex Head Screw, 5/16-18 x 1.50 |
9 | 712-0266A | Jamlock Nut, 3/8-16 |
10 | 912-3010 | Hex Nut, 5/16-18 |
11 | 914-0104 | Cotter Pin, .072 DIA. x 1.13 LG |
12 | 936-0104 | Washer, Lock, 5/16 |
13 | 936-0119 | Washer, Lock, 5/16 |
14 | 936-0176 | Washer, Flat, .265 x .938 x .120 |
15 | 736-0242 | Washer, Bell, .340 x .872 x .060 |
16 | 936-0271 | Washer, Spring, .317 x .625 x .020 |
17 | 936-0329 | Washer, Lock, 1/4 |
18 | 936-0452 | Washer, Bell, .396 x 1.140 x .095 |
19 | 938-0876 | Shoulder Nut, 7/16-20 |
20 | 746-1117 | Clutch Cable |
21 | 747-1159 | Idler Pulley Rod |
22 | 954-0434 | Belt, 4L x 58.16 LG |
23 | 756-0405 | Flat Idler Pulley w/ Flanges, 3.75 O.D. |
24 | 756-0971 | Engine Pulley, Inner Half |
25 | 756-0972 | Engine Pulley, Outer Half |
26 | 756-1162 | Input Pulley, 4L x 8.594 |
27 | 786-0064A | Idler Pulley Bracket |
28 | 786-0185A-0637 | Belt Keeper Bracket, B&S 6.5 HP |
29 | 786-0187-0637 | Shaft Cover Bracket |
30 | 786-0193-0637 | Idler Belt Keeper |
31 | 686-0109A | Shaft Crank Assembly |
32 | 710-0653 | Screw, 1/4-20:0.375 |
33 | 710-1017 | Screw, 1/4-14:0.625 |
34 | 712-0392 | Lock Nut, Cap, 1/4-28 |
35 | 915-0120 | Spiral Pin, 3/16 x 1.00 |
36 | 936-3020 | Washer, Flat, .271x .630 x .065 |
37 | 784-0158A-0662 | Belt Cover - Gray |
784-0158A-0691 | Belt Cover - Black Jack | |
784-0158A-0638 | Belt Cover-Red | |
38 | 784-0208D-0638 | Shaft Cover-Red |
784-0208D-0691 | Shaft Cover-Black | |
39 | 934-04231 | Wheel, 16 x 4.6 x 8 |
934-04233 | Wheel, 14 x 4.5 x 6 | |
40 | 710-0606 | Hex Head Screw, 1/4-20 x 1.50 |
41 | 712-04064 | Flangelock Nut, 1/4-20 |
42 | 911-0415 | Clevis Pin, .375 x 1.75 |
43 | 714-04043 | Cotter Pin, Bow-Tie |
44 | 986-04074A | Complete Gear Case Assembly |
45 | 712-3054 | Hexlock Nut, 3/8-24 |
46 | 936-0169 | Washer, Lock, 3/8 |
47 | 936-0208 | Washer, Flat, .51 x 1.5 x 0.07 |
48 | 936-0253 | Washer, Bell, .525 x 1.00 x .050 |
49 | 938-0688 | Screw, Shoulder, 3/8-24 x 1/2 x .325 |
50 | 938-0689 | Screw, Shoulder, 3/8-24 x 1/2 x .180 |
51 | 742-0305A-0637 | Articulating Tine |
52 | 984-0160-0637 | Tine Adaptor Assembly |
53 | 731-07556 | Cap |
Transmission Assembly
Exploded view diagram of the Transmission Assembly. This section details internal components such as gears, shafts, bearings, seals, chains, sprockets, and housing parts, along with fasteners and washers.
Ref. | Part Number | Description |
---|---|---|
1 | 611-0021 | Shaft Assembly, Tine, 18T |
2 | 611-0128 | Shaft Assembly, Jack |
3 | 611-0129 | Shaft Assembly, Shift Input |
4 | 611-04074A | Shaft Assembly, Wheel, 33T |
5 | 617-0058 | Gear Assembly, 30T Reverse Idler |
6 | 617-0059 | Gear Assembly, 30T Tine Idler |
7 | 617-0060 | Sprocket Assembly, 9T Tine Input |
8 | 617-0061 | Sprocket Assembly, 10T Whl Input |
9 | 617-0062 | Gear Assembly, 11T |
10 | 686-0108A-0637 | RH Chain Case Housing Assembly |
11 | 710-0376 | Hex Head Screw, 5/16-18 x 1.00 |
12 | 710-0599 | Screw, 1/4-20 x 0.500 |
13 | 710-0604A | Screw, :5/16-18 x 0.625 |
14 | 710-3008 | Hex Head Screw, 5/16-18 x .75 |
15 | 711-1349 | Input Shaft, .75 |
16 | 712-0378 | Nut, Hex, 7/16-20 |
17 | 712-3004A | Nut, Flangelock, 5/16-18 |
18 | 913-0367 | Endless Chain, #420 x 50 Links |
19 | 913-0484 | Endless Chain, #50 x 54 Links |
20 | 716-0865 | Snap Ring, .500 |
21 | 717-0853 | Clutch Collar |
22 | 717-1582 | Gear Spur, 44T |
23 | 717-1583 | Gear Spur, 30T |
24 | 717-1584 | Gear Spur, 30T |
25 | 717-1585 | Gear Spur, 44T |
26 | 717-1587 | Gear Spur, 44T |
27 | 717-1594 | Gear Spur, 16T |
28 | 921-0378 | Shaft Seal, 1.0 |
29 | 721-0379 | Shaft Seal, .75 |
30 | 786-0238 | Positioner Gear Bracket |
31 | 726-0277 | Tapered Cap Plug |
32 | 932-0496 | Compression Spring, .230 OD |
33 | 936-0163 | Washer, Flat, 1.03 x 1.62 x .03 |
34 | 936-0171 | Washer, Lock, 7/16 |
35 | 936-0226 | Washer, Flat,.474 x .879 x .064 |
36 | 936-0351 | Washer, Flat, .760 ID x 1.50 OD |
37 | 736-0407 | Washer, Bell,.45 x 1.00 x .062 |
38 | 736-0518 | Washer, Thrust, .445 x 1.92 x .060 |
39 | 736-3088 | Washer, Flat,1.595 x .635 x .062 |
40 | 686-04129-0637 | LH Chain Case Housing |
41 | 950-0671 | Spacer, .75 x 2.0 x .50 |
42 | 738-0645 | Shaft Detent, .5 DIA |
43 | 738-0648 | Shaft, Jack, .625 x 2.385 |
44 | 738-1013 | Shaft, Jack, .6250 x 5.0050 |
45 | 941-0600 | Ball Bearing, 17 x 40 x 12:6203 |
46 | 941-0420 | Flange Bearing, 1.0 x 2.5 x 1.38 |
47 | 741-0421 | Flange Bearing, .75 x 2.5 x 1.38 |
48 | 941-0563 | Ball Bearing, 17 x 40 x 12:6203 |
49 | 741-0862 | Ball, Detent, .250 |
50 | 750-0258 | Spacer, .315 x .750 x .375 LG |
51 | 950-0570 | Spacer, 1.0 ID x 2.0 OD x.5 LG |
52 | 750-0664 | Spacer, .505 ID x .88 OD x .440 |
Engine Model - 170-V0A
Exploded view diagrams illustrating the components of the 170-V0A engine. This section includes detailed parts lists for the cylinder head, carburetor, fuel system, crankcase, flywheel, starter, and various internal and external engine components, fasteners, and gaskets. Parts without numeric call-outs are noted as not serviceable.
Ref. | Part Number | Description |
---|---|---|
1 | 710-04917 | Bolt |
2 | 951-11054A | Valve Cover |
3 | 731-07059 | Breather Hose |
4 | 726-04101 | Breather Hose Clamp |
5 | 951-11565 | Valve Cover Gasket |
6 | 751-11124 | Nut, Pivot Locking |
7 | 751-11123 | Valve Adjusting Nut |
9 | 710-04902 | Rocker Arm Stud |
16 | 710-05100 | Cylinder Head Bolt |
18 | 951-10292 | Spark Plug |
19 | 710-04911 | Muffler Stud |
21 | 712-04214 | Nut |
22 | 951-11590 | Muffler Assembly |
23 | 710-05002 | Bolt |
24 | 710-05101 | Carburetor Stud |
25 | 751-11567 | Carburetor Insulator Gasket |
26 | 951-11568 | Carburetor Insulator |
27 | 951-11569 | Carburetor Gasket |
29 | 951-11571 | Carburetor Gasket Plate |
30 | 951-10806 | Air Cleaner Housing |
31 | 712-04213 | Nut |
32 | 951-11067 | Throttle Control Knob |
33 | 710-05102 | Self-Tapping Bolt |
39 | 951-11572 | Cylinder Head Gasket |
42 | 715-04090 | Dowel Pin |
45 | 951-11253 | Piston Ring Set |
49 | 710-04915 | Bolt |
50 | 951-11113 | Air Shield |
51 | 951-11573 | Connecting Rod Assembly |
52 | 951-11356 | Governor Arm Shaft |
53 | 736-04461 | Governor Shaft O-Ring |
54 | 951-11574 | Governor Seal |
55 | 714-04078 | Cotter Pin |
56 | 951-11575 | Camshaft Assembly |
57 | 951-11369 | Radial Ball Bearing |
59 | 951-10307 | Flywheel Key |
60 | 951-11576 | Governor Assembly |
61 | 715-04092 | Dowel Pin, 7 x 14 |
62 | 715-04089 | Dowel Pin, 9 x 14 |
63 | 951-11371 | Crankcase Cover Gasket |
65 | 710-04932 | Bolt |
66 | 951-11577 | O-Ring |
68 | 951-11578 | Oil Seal |
70 | 736-04440 | Oil Drain Plug Washer |
71 | 710-04906 | Oil Drain Plug |
73 | 951-10792 | Ignition Coil |
74 | 710-04919 | Bolt |
75 | 951-10805 | Flywheel |
76 | 951-10934 | Cooling Fan |
77 | 951-10911 | Starter Cup |
78 | 712-04209 | Nut |
81 | 951-11583 | Blower Housing |
82 | 736-04455 | Washer |
83 | 710-04914 | Bolt |
84 | 951-10790 | Recoil Starter Assembly |
85 | 951-11584 | Primer Bracket |
86 | 710-05103 | Bolt |
87 | 951-11585 | Governor Spring |
88 | 951-10664 | Throttle Linkage Spring |
89 | 951-10665 | Throttle Linkage |
90 | 951-11106 | Governor Arm |
91 | 712-04212 | Nut |
92 | 710-04908 | Governor Arm Bolt |
97 | 951-10662 | Engine/Dipstick Cover |
98 | 710-04905 | Bolt |
100 | 951-11380 | O-Ring |
101 | 951-10656 | Dipstick Tube |
106 | 951-10652 | Fuel Filter |
107 | 951-10796 | Fuel Tank |
109 | 710-04918 | Bolt |
110 | 951-11109 | Blower Housing Shield |
a | 951-11177 | Choke Control Lever |
s | 951-11589 | Fuel Bowl Gasket |
u | 710-04904 | Fuel Bowl Bolt Gasket |
v | 710-04945 | Fuel Bowl Mounting Bolt |
w | 951-11349 | Fuel Drain Plug Gasket |
x | 710-04903 | Fuel Drain Bolt |
-- | 951-10829 | Spark Arrestor (Not Shown) |
-- | 951-10651 | Fuel Tank Nipple (Not Shown) |
-- | 951-10798A | Short Block |
5 | 951-11565 | Valve Cover Gasket |
20 | -- | Exhaust Pipe Gasket |
25 | 751-11567 | Carburetor Insulator Gasket |
26 | 951-11568 | Carburetor Insulator |
29 | 951-11571 | Carburetor Gasket Plate |
39 | 951-11572 | Cylinder Head Gasket |
41 | -- | Valve Lifter |
45 | 951-11253 | Piston Ring Set |
46 | -- | Piston Pin Clip |
47 | -- | Piston |
48 | -- | Piston Pin |
51 | 951-11573 | Connecting Rod Assembly |
52 | 951-11356 | Governor Arm Shaft |
53 | 736-04461 | Governor Shaft O-Ring |
54 | 951-11574 | Governor Seal |
55 | 714-04078 | Cotter Pin |
56 | 951-11575 | Camshaft Assembly |
57 | 951-11369 | Radial Ball Bearing |
58 | -- | Crankshaft Assembly |
60 | 951-11576 | Governor Assembly |
61 | 715-04092 | Dowel Pin, 7 x 14 |
62 | 715-04089 | Dowel Pin, 9 x 14 |
63 | 951-11371 | Crankcase Cover Gasket |
64 | -- | Crankcase Cover |
65 | 710-04932 | Bolt |
66 | 951-11577 | O-Ring |
67 | -- | Oil Filler Plug |
68 | 951-11578 | Oil Seal |
69 | -- | Crankcase Complete |
70 | 736-04440 | Oil Drain Plug Washer |
71 | 710-04906 | Oil Drain Plug |
-- | 951-11587 | Crankshaft Kit |
57 | 951-11369 | Radial Ball Bearing |
58 | -- | Crankshaft Assembly |
59 | 951-10307 | Flywheel Key |
63 | 951-11371 | Crankcase Cover Gasket |
68 | 951-11578 | Oil Seal |
-- | 951-11063A | Valve Cover Gasket Kit |
2 | 951-11054A | Valve Cover |
5 | 951-11565 | Valve Cover Gasket |
-- | 951-10799 | Cylinder Head Assembly |
5 | 951-11565 | Valve Cover Gasket |
7 | 751-11123 | Valve Adjusting Nut |
8 | -- | Rocker Arm |
9 | 710-04902 | Rocker Arm Stud |
10 | -- | Push Rod Guide |
11 | -- | Valve Spring Retainer-Intake |
12 | -- | Exhaust Valve Adjustor |
13 | -- | Valve Spring Retainer-Exhaust |
14 | -- | Valve Spring |
17 | -- | Cylinder Head |
20 | -- | Exhaust Pipe Gasket |
25 | 751-11567 | Carburetor Insulator Gasket |
26 | 951-11568 | Carburetor Insulator |
39 | 951-11572 | Cylinder Head Gasket |
42 | 715-04090 | Dowel Pin |
43 | -- | Exhaust Valve |
44 | -- | Intake Valve |
-- | 951-11586 | Crankcase Cover Kit |
57 | 951-11369 | Radial Ball Bearing |
63 | 951-11371 | Crankcase Cover Gasket |
64 | -- | Crankcase Cover |
65 | 710-04932 | Bolt |
68 | 951-11578 | Oil Seal |
-- | 951-11588 | Crankcase Kit |
52 | 951-11356 | Governor Arm Shaft |
53 | 736-04461 | Governor Shaft O-Ring |
54 | 951-11574 | Governor Seal |
55 | 714-04078 | Cotter Pin |
57 | 951-11369 | Radial Ball Bearing |
68 | 951-11578 | Oil Seal |
-- | 951-10801A | Gasket Kit - External |
20 | -- | Exhaust Pipe Gasket |
25 | 751-11567 | Carburetor Insulator Gasket |
27 | 951-11569 | Carburetor Gasket |
66 | 951-11577 | O-Ring |
68 | 951-11578 | Oil Seal |
70 | 736-04440 | Oil Drain Plug Washer |
-- | 951-10818 | Air Cleaner Housing Assembly |
35 | -- | Lower Housing |
38 | -- | Upper Housing |
-- | 951-10647 | Valve Kit |
43 | -- | Exhaust Valve |
44 | -- | Intake Valve |
-- | 951-10655 | Dipstick Assembly |
102 | -- | Dipstick Gauge |
103 | -- | Dipstick Cap |
-- | 951-10669 | Oil Fill Plug Assembly |
66 | 951-11577 | O-Ring |
67 | -- | Oil Filler Plug |
-- | 951-10650 | Fuel Line Kit |
94 | -- | Fuel Hose |
95 | -- | Hose Clamp |
-- | 951-10657 | Muffler Stud Assembly |
19 | 710-04911 | Muffler Stud |
-- | 951-10819 | Cylinder Head Service Kit |
5 | 951-11565 | Valve Cover Gasket |
15 | -- | Valve Seal |
16 | 710-05100 | Cylinder Head Bolt |
39 | 951-11572 | Cylinder Head Gasket |
-- | 951-10794 | Air Cleaner |
36 | -- | Air Cleaner Foam Wrap |
37 | -- | Air Cleaner Element |
-- | 951-10802A | Gasket Kit - Complete |
5 | 951-11565 | Valve Cover Gasket |
20 | -- | Exhaust Pipe Gasket |
-- | 951-10800A | Carburetor Kit - Major |
25 | 751-11567 | Carburetor Insulator Gasket |
26 | 951-11568 | Carburetor Insulator |
27 | 951-11569 | Carburetor Gasket |
29 | 951-11571 | Carburetor Gasket Plate |
39 | 951-11572 | Cylinder Head Gasket |
53 | 736-04461 | Governor Shaft O-Ring |
63 | 951-11371 | Crankcase Cover Gasket |
66 | 951-11577 | O-Ring |
68 | 951-11578 | Oil Seal |
70 | 736-04440 | Oil Drain Plug Washer |
105 | 951-10917 | Fuel Cap |
-- | -- | Gasket (Not Shown) |
-- | -- | Gasket Retainer (Not Shown) |
-- | 951-10826 | Recoil Spring & Pulley Assembly |
-- | -- | Starter Pulley (Not Shown) |
-- | -- | Recoil Spring (Not Shown) |