MTD A3150K 3 H.P. Chain-Drive Front Tine Tiller - Parts Diagram and List
This document provides a detailed parts breakdown for the MTD A3150K front tine tiller, including an exploded view diagram description and a comprehensive parts list.
Product Overview
The MTD A3150K is a 3 H.P. chain-drive front tine tiller designed for garden cultivation. This document serves as a reference for identifying and ordering replacement parts.
Parts Diagram Description
The accompanying diagram illustrates an exploded view of the MTD A3150K tiller. Components are identified by reference numbers, which correspond to the detailed parts list provided below. The diagram shows the arrangement of the engine, frame, transmission, tines, wheels, handles, and various fasteners and components.
Parts List
Left Side Parts List
Ref. No. | Part No. | Description |
---|---|---|
1 | 463687 | Plate-Belt Guide |
2 | * | Engine - 3 HP |
3 | 715508 | Nut-Hex 1/4-20 toplock |
4 | 315093 | Set Screw Pulley |
5 | 570036 | Belt Guard Assembly |
6 | 450072 | Bolt Hex 1/4-20 x 1-1/2 |
7 | 446369 | Key 3/16 Sq. x 1-1/4 |
8 | 618744 | Pulley Engine |
9 | 715078 | Nut Hex 1/4-20 Whiz |
10 | 153932 | Bolt Carriage 1/4-20 x 1-3/4 |
11 | 715524 | Nut Hex 3/8-16 Lock |
12 | 421321 | Belt Drive |
13 | 432427 | Transmission Assembly |
14 | 672923 | Pulley - Idler |
15 | 457176 | Bolt Hex 3/8-16 x 1-1/4 |
16 | 779165 | Arm Idler |
17 | 715045 | Bolt Hex 1/4-20 x 3/4 |
18 | 435289 | Bar - Depth |
19 | 460311 | Bolt Hex 5/16-18 x 1-3/4 |
20 | 570077 | Hood-Tine |
21 | 715490 | Nut Hex 5/16-18 Toplock |
22 | 771576 | Bracket Depth Bar |
23 | 772889 | Bracket Idler Mtg. |
24 | 459131 | Bolt Hex 5/16-18 x 1 |
25 | 715011 | Hairpin Cotter |
26 | 616532 | Pin Clevis 3/8 x 1-5/8 |
27 | 452615 | Nut Hex 1/4-20 Nylok |
28 | 446914 | Beam Main Support R.H. |
29 | 468256 | Spacer Beam |
30 | 446898 | Beam Main Support L.H. |
31 | 153874 | Bolt Hex 1/4-20 x 2 1/4 |
32 | 774737 | Seal Input Shaft, small |
33 | 423608 | Bearing Input Shaft |
34 | 151936 | Bolt Curved Head 5/16-18 x 2-1/4 |
35 | 590026 | Transmission-Half w/Bearings |
36 | 762039 | Gasket Transmission Housing |
37 | 425389 | Chain Roller, No.42 |
38 | 417691 | Shaft-Input w/Sprocket |
39 | 150201 | Washer - Curved |
40 | 715052 | Bolt Hex 1/4-20 x 1/2 |
41 | 715193 | Pin Roll 3/16 x 1-1/4 |
42 | 419689 | Pulley Assembly |
43 | 715441 | Nut Hex 3/8-16 Whiz |
44 | 432971 | Sleeve Bearing |
45 | 423624 | Bearing Center Hub |
46 | 434829 | Sprocket & Hub Assembly |
47 | 461780 | Washer Lock 3/8 int tooth |
Right Side Parts List
Ref. No. | Part No. | Description |
---|---|---|
48 | 459032 | Bolt Hex 3/8-16 x 2-1/4 |
49 | 781625 | Cup Shaft Cover |
50 | 786640 | Tine & Hub Assembly - R.H. Outer |
51 | 786582 | Tine & Hub Assembly - R.H. Inner |
52 | 786558 | Tine & Hub Assembly - LH. Inner |
53 | 786616 | Tine & Hub Assembly - LH. Outer |
54 | 488965 | Pin Clevis 5/16 x 1-1/4 |
55 | 551655 | Decal - Tine Warning |
56 | 153668 | Bolt Wheel |
57 | 731703 | Handle - L.H. |
58 | 715086 | Nut Hex 3/8-16 Lock |
59 | 774760 | Seal Output Shaft, large |
60 | 423632 | Bearing Output Shaft |
61 | 555912 | Yoke Handle |
62 | 417725 | Shaft Output w/Sprocket |
63 | 468249 | Spacer Tine Shaft |
64 | 731711 | Handle - R.H. |
65 | 715334 | Nut Hex 10-24 Keps |
66 | 744037 | Knob Throttle Control |
67 | 751032 | Grip - handle |
68 | 744284 | Knob Handle Retainer |
69 | 152363 | Bolt Carriage 1/4-20 x 1-1/4 |
70 | 771600 | Bracket Assembly - Wheel |
71 | 498634 | Wheel-8" |
72 | 153510 | Washer Lock 5/16 int tooth |
73 | 425397 | Chain Roller, No. 420 |
74 | 452128 | Palnut 1/4" Dia. |
75 | 775130 | Spring Latch |
76 | 615690 | Washer - 1/4" Dia. |
77 | 574376 | Panel Handle |
78 | 458687 | Screw Hex 10-24 x 1/2 |
79 | 530626 | Control Throttle w/Cable |
80 | 489013 | Pin Clevis 1/4" Dia. x 1-3/4 |
81 | 432963 | Sleeve Yoke Mounting |
82 | 731695 | Lever Control |
83 | 450478 | Bolt Spade 1/4-20 x 3/4 |
84 | 616789 | Spacer Idler Arm |
85 | 489005 | Pin Clevis 1/4" x 1-1/2 |
86 | 530188 | Cable Idler Control |
87 | 553040 | Decal Handle Panel |
88 | 551648 | Decal Caution |
89 | 551689 | Decal- Control |
90 | 402016 | Decal Hand Placement |
91 | 110379 | Cable Tie |
92 | 551846 | Decal Caution Disengage |
Important Notes
- Contact the engine manufacturer's authorized service dealer for engine parts and warranty.
- When servicing, use only Genuine Factory Replacement Parts (OEM) specifically designed for this model.
- Parts are designated as right or left hand as viewed from the operator's position.
- Model specifications are subject to change without prior notice.
- Do not operate the tiller unless all parts are attached and in good working order.
- Tiller tine cover, handle, and/or other painted parts differing in color may be substituted without notice.
Optional Accessory
93 Furrowing Kit (Part No. 465856)