Anker SoundCore Flare User Manual

Box Contents and Overview

A cylindrical Bluetooth speaker is shown from the top and side. Numbered callouts indicate various buttons and ports:

• 1. Volume Buttons (for sound control)
• 2. Bass Up Button
• 3. Multi-function Button
• 4. Light Effects Button
• 5. Bluetooth Button
• 6. Power Button
• 7. 3.5mm Aux Input
• 8. MicroUSB Charging Input

Charging Your SoundCore Flare

Illustration shows a MicroUSB cable connected to the speaker's charging port (labeled 8) and the other end connected to a USB port on a laptop or a power adapter.

Operating the SoundCore Flare

To Turn On: Press the Power button [6] once [▶️ x 1].

To Turn Off: Press and hold the Power button [6] for 2 seconds [⏱️ 2s].

Bluetooth Mode

Follow these steps to connect via Bluetooth:

1. Press the Bluetooth button [5] on the speaker. The LED indicator will flash white, indicating pairing mode.
2. Enable Bluetooth on your smartphone or device and select "SoundCore Flare" from the list.
3. The LED indicator on the speaker will turn solid white when successfully connected.

LED Indicator Status:

Establishing Connection with AUX Input

A 3.5mm AUX cable can be used to connect the speaker to an audio source. Connect the cable to the speaker's AUX input (labeled 7) and the audio output of your device.

Note: Bluetooth connection is automatically disabled when an AUX connection is made. An AUX cable is not included in the box.

Controls

Music playback and call handling are managed via the speaker's buttons:

LED Indicators for Calls:

• ? Solid White: In Call
• ? Flashing White: Incoming Call

When a call comes in, music will automatically pause to allow you to answer or reject the call. Music will resume automatically when the call is ignored or ended.

Safety Instructions

• Avoid dropping the speaker.
• Do not disassemble the speaker.
• Do not submerge the speaker in water.
• Avoid exposure to extreme temperatures.
• Use only original or certified cables for charging.
• Ensure adequate ventilation around the speaker for proper heat dissipation.
• Do not use the device outdoors during a storm.
• Ensure the protective cover is closed before exposing SoundCore to liquids; do not charge near water.
• Do not use abrasive cleaners or oil for cleaning the speaker.

EU Declaration of Conformity

We, hereby declare that the essential requirements set out in the RED Directive 2014/53/EU, have been fully fulfilled on our product with indication as below:

The following standards have been applied for the investigation of compliance:

• Safety: EN 60065: 2014
• Safety (Adaptor)
• Health: EN 62479: 2010
• EMC: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0
• Radio: EN 300 328 V2.1.1

Furthermore, the ISO requirement for the in-process quality control procedure as well as the manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection.

Detail contact information for this declaration has been listed below as the window of any issues relevant for this declaration.

Manufacturer Information:

Signature / stamp: [Signature Placeholder]

Date: 2018-3-28

WARRANTY CERTIFICATE

WARRANTY TERMS

1. The warranty period begins from the date of product delivery and lasts for 2 years.
2. All parts of the product are covered by the warranty.
3. In case of a defective product, the consumer can exercise one of the following rights as stipulated in Article 11 of Law No. 6502 on Consumer Protection:
   • Withdrawal from the contract,
   • Request a price reduction,
   • Request free repair,
   • Request replacement with a defect-free equivalent product.
4. If the consumer chooses the right to free repair, the seller is obliged to perform or have the product repaired without charging any fees for labor, parts, or any other costs. The consumer can also exercise this right against the manufacturer or importer. The seller, manufacturer, and importer are jointly liable to the consumer.
5. If the consumer exercises their right to free repair, and the product:
   • Malfunctions again within the warranty period,
   • Exceeds the maximum repair time,
   • Is determined by the authorized service station, seller, manufacturer, or importer to be irreparable,
   the consumer can demand a refund, a price reduction proportional to the defect, or replacement with a defect-free equivalent product from the seller. The seller cannot refuse the consumer's request. If this request is not fulfilled, the seller, manufacturer, and importer are jointly liable.
6. The repair time for the product shall not exceed 20 working days. This period starts from the date the defect is reported to the authorized service station or seller within the warranty period, or from the date the product is delivered to the authorized service station if outside the warranty period. If the defect cannot be resolved within 10 working days, the manufacturer or importer must provide a similar product for the consumer's use until the repair is completed. If the product malfunctions within the warranty period, the repair time is added to the warranty period.
7. Defects arising from misuse contrary to the instructions in the user manual are not covered by the warranty.
8. For disputes related to warranty rights, the consumer can apply to the Consumer Arbitration Committee or Consumer Court at their place of residence or where the transaction took place.

WARRANTY VALIDITY CONDITIONS

1. Warranty will be void if the device is installed and/or repaired by parties other than our authorized service centers, or if the device is found to have been opened.
2. The warranty provided by our company does not cover defects arising from the use of the device for purposes other than its intended use or under abnormal conditions, nor does it cover the following defects:
   • Defects caused by misuse contrary to the instructions in the user manual or installation manual, or by accidents.
   • Defects and damages resulting from voltage incompatibility, faulty electrical equipment, or use with a voltage different from that stated on the device label.
   • Defects and damages resulting from natural disasters such as fire, flood, and lightning strikes.
   • Defects and damages occurring during transportation, loading, unloading, and handling after delivery to the consumer.

IMPORTER COMPANY