Introduction
This manual provides essential information for the installation and setup of Braeburn programmable thermostats, specifically models 4030 and 4235. It details system specifications, wiring configurations for various heating and cooling systems, and step-by-step installation procedures. The guide also covers crucial installer settings and system testing to ensure optimal performance.
Key Features and Models
- Model 4030: Supports up to 2 Heat / 1 Cool Heat Pump and 1 Heat / 1 Cool Conventional systems.
- Model 4235: Supports up to 3 Heat / 2 Cool Heat Pump and up to 2 Heat / 2 Cool Conventional systems with humidity control and dry contact.
- Power Requirements: Requires 24 Volt AC power or 2 "AA" Alkaline batteries.
- Compatibility: Compatible with single-stage conventional and heat pump systems, multi-stage systems, millivolt systems, and hydronic zone systems.
Installation Overview
Proper installation is crucial for thermostat functionality. Key steps include:
- Disconnecting power before installation.
- Selecting an appropriate thermostat location, avoiding drafts and direct sunlight.
- Mounting the sub-base securely.
- Connecting wiring according to system type (Conventional or Heat Pump).
- Providing power via AC adapter or batteries.
- Attaching the thermostat body to the sub-base.
- Configuring installer settings specific to the HVAC system.
Important Considerations
- Always disconnect power before beginning installation to prevent electrical shock or equipment damage.
- This manual is intended for experienced service technicians.
- Refer to the detailed wiring diagrams for specific system configurations.
- Installer settings must be configured correctly for proper operation.
- Consult the Braeburn website or contact technical support for further assistance.
For detailed warranty information, please visit www.braeburnonline.com/warranty or call 866.268.5599.
Braeburn Systems Home - Braeburn
