V360 Pro Wi-Fi Network Intelligent Camera Instruction Manual

Introduction

This manual provides instructions for setting up and using the V360 Pro Wi-Fi Network Intelligent Camera. It covers app installation, device connection, camera features, and troubleshooting.

1. Download and Install APP

You can download and install the 'V360 Pro' app through the following methods:

• Scan the QR code for quick download and installation.
• Search for "V360 Pro" in your mobile app store (App Store or Google Play).
• Visit the official website www.cloudbirds.cn and scan the QR code to download.

2. Sign In

New Users: Click "Register Now" to enter the registration page. Select your country, enter your account name (phone number or email), and follow the prompts for code verification to register.

Existing Users: Directly enter your account name and password to log in.

3. Camera Connection Methods

For initial Wi-Fi configuration, place the camera close to your Wi-Fi router. After configuration, you can install it in the desired location. If the location is far from the router, use a network cable connection.

3-1 Bluetooth Addition

Connect the camera using its emitted Bluetooth signal. Power on the camera, connect your phone to Wi-Fi, and wait for the pairing notification. Follow the on-screen instructions.

3-2 Add Device by AP Hotspot

Power on the camera and wait for the startup sound prompt. Open the V360 Pro app, click the "+" icon in the upper right corner, select "Hotspot Adding", and follow the instructions. This involves connecting to the camera's hotspot and then configuring the Wi-Fi network.

3-3 Add Device by QR Code

Open the V360 Pro app, click the "+" icon in the upper right corner, and select "QR Code Addition". Click "Next" to generate a QR code. Place the QR code in front of the camera lens (about 10-20cm away) until you hear a prompt, then click "Hear Prompt" to connect.

3-4 Add Device By Network Cable

Ensure your phone and the camera are connected to the same network. Open the V360 Pro app, click the "+" icon in the upper right corner, and select "Add Camera by Network Cable". Click "Next" to proceed. Connection is successful when the page indicates it.

4. Home Page

The home page displays camera status, allows adding cameras, and provides access to camera settings.

5. Real-time Screen

Click the preview image on the home page to enter the real-time viewing screen. From here, you can:

• View camera status.
• Access camera settings (nickname, infrared/white light modes, full screen, screen flip, intercom, screenshot, PTZ control).
• Trigger alarms.
• View messages and personal settings.

6. Sharing Function

Share your camera with others:

• Scan QR code to share device: Generate a QR code for sharing.
• Share by entering an account: Enter the user's registered mobile phone number or email account to share.
• Sharing through face-to-face scanning: Share by scanning each other's QR codes.

7. Recording Function

Manage your recordings:

• Record Mode: Choose between Full-time video recording, Alarm recording (records upon motion detection), or Scheduled recording (set specific recording times).
• Storage: Recordings can be saved to a local album, local video (SD card), or cloud storage.

8. Alarm Function

Enable push notifications and motion detection to receive alarm information on your mobile phone when the camera detects movement.

9. Cloud Storage Playback

Access and manage your cloud-stored recordings. This includes viewing cloud storage status (with an option to purchase more), downloading, and deleting cloud recordings. You can select specific dates for playback.

10. Video Playback

Review recorded footage from your SD card or cloud storage. Select dates to view specific recordings.

11. Mobile Tracking

When surrounding objects move, the camera automatically rotates its lens to track and locate them. Enable this feature in Camera Settings under "Mobile Tracking".

FAQs

1. What should I do if I can't connect to the network?

Wired Connection: Ensure the camera is connected via network cable and use the "Network cable to add camera" option in the app.

Wi-Fi Connection: Verify the Wi-Fi password, do not plug in the network cable, listen for the startup music, reset the camera using the reset pin, and then follow the "network cable to add camera" prompts (Note: This seems to be a contradiction in the instructions, likely meaning to follow the Wi-Fi setup prompts after reset). Consider using a network cable if experiencing interference or high Wi-Fi usage. Ensure the camera is powered by its standard adapter.

2. What is the problem of image jamming?

Ensure adequate upload bandwidth (recommended 2M+) for the camera's network and download bandwidth (recommended 2M+) for your phone's network. If using Wi-Fi, reduce the number of users on the network or try a wired connection for the camera.

3. Is it normal for the camera to enter slowly in the "connected" state when adding?

Yes, this is normal as camera user information is being saved to the cloud service. This ensures that if your phone is lost, your camera information is preserved and easily accessible by logging into your account on a new device.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. Any unauthorized changes or modifications may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed and used correctly, it may cause harmful interference to radio communications.

If interference occurs, try the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different circuit than the receiver.
• Consult a dealer or experienced radio/TV technician.

To maintain compliance with FCC's RF Exposure guidelines, install and operate this equipment with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.