Prexiso P1P3M 2-in-1 Compact Magnetic Laser Torpedo Level

Safety Instructions

Working safely with this measuring tool requires reading and strictly following all operating and safety information provided. Never make warning labels unrecognizable. Save these instructions.

Caution

The use of operating or adjusting equipment or application/processing methods other than those mentioned herein can lead to hazardous radiation exposure.

Laser Safety

• Laser Radiation: Do not stare into the beam.
• Class 2 Laser product. Complies with IEC/EN 60825-1: 2014 and 21 CFR 1040.10 and 1040.11.
• Turn the laser beam on only when using the tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure as the laser beam can cause blindness.
• Do not operate the tool around children or allow children to operate it.
• Do not place the tool where anyone might unintentionally stare into the laser beam.
• Avoid use on reflecting surfaces (e.g., sheet steel, glass, polished metal) as they can reflect the beam back at the operator.
• Always turn the laser tool off when not in use.
• Do not attempt to modify the performance of this laser device, as it may result in dangerous laser radiation exposure.
• Do not attempt to repair or disassemble the laser-measuring tool. Repairs should only be performed by qualified service personnel.
• Using accessories not designed for this laser tool could result in serious injury.
• Do not operate the tool outdoors.
• Do not place or store the tool under extreme temperature conditions.
• Do not operate the tool in explosive environments (e.g., presence of flammable liquids, gases, or dusts) as sparks may ignite dust or fumes.
• Measurement accuracy may be affected if used beyond the rated range.
• Using optical instruments with this product will increase eye hazard.
• Ensure bystanders are aware of the dangers of looking directly into the measuring tool.
• Laser viewing glasses are not safety goggles and do not protect against laser radiation.
• Always remove batteries when cleaning the laser light aperture or lens.
• Always remove batteries if the instrument will not be used for a long time. Ensure correct battery polarity when replacing.

Technical Specifications

*Important: Accuracy is rated within 10 meters. Accuracy and range may be reduced under unfavorable conditions such as extreme interior illumination, transparent surfaces, porous surfaces, reflecting surfaces, or very rough surfaces.

Description

The Prexiso P1P3M is a highly versatile 2-in-1 tool combining a torpedo level and a line laser level. It can be placed on the ground, mounted on a door frame, work bench, etc. It is ideal for line marking and simple alignment by sight.

Components

• A: Laser outlet
• B: Horizontal vial for alignment
• C: Laser ON/OFF switch
• D: LED light ON/OFF switch
• E: Magnetic V-groove
• F: Rotatable vial
• G: Battery compartment
• H: Magnet for iron wall mount plate
• Iron wall mount plate
• J: Reusable double sided mounting gel pad

Note: The distance between the laser outlet and the base is 1.06 in. (27mm).

Unpacking

When unpacking, do not discard any packing materials until all contents are accounted for:

• 2-in-1 compact magnetic laser torpedo level
• 1 x AAA alkaline battery
• Iron wall mount plate
• Reusable double sided mounting gel pad
• Operator's manual

Carefully lift the laser tool out of the package and place it on a stable, flat surface.

Assembly

Inserting/Replacing the Battery

Use one 1.5V AAA alkaline battery. Open the battery compartment lid using a PH #1 Philips screwdriver or a 3mm slotted screwdriver. Insert the battery, observing the correct polarity as indicated inside the lid.

Note: Remove the battery when not using the tool for extended periods to prevent corrosion and discharge.

Operation

1. Turning the Laser Tool On and Off

• Push the button to project a laser beam from the laser outlet. Push again to turn the laser beam off.
• Push the button to turn on the LED light in the horizontal bubble. Push again to turn it off.

Note: The LED light in the horizontal bubble is useful for tasks in dark areas.

2. Levelling

This laser level is not self-leveling. Use the horizontal bubble to achieve a horizontal line with the bubble centered. The rotating vial can be used to confirm the inclination of the laser line or vertical angle. It can be adjusted to 22.5°, 45°, 67.5°, and 90° for quick angle settings.

The tool has a magnetic back and can be attached to the iron wall mount plate. The iron wall mount plate can be fixed to a wall by nailing. The laser level can also be attached to smooth surfaces using the provided reusable double-sided mounting gel pad.

Notes:

• The gel pad can be washed and reused. Wash it frequently to maintain adhesion. Ensure the gel pad is clean of dust or debris before use.
• Do not use the gel pad on loose or wet wall surfaces to prevent the laser level from falling.
• Always keep the target wall surface clean when using the gel pad.

Applications

The tool can be placed on the ground, mounted on a work bench/door frame, etc. It is ideal for line marking and simple alignment by sight.

Line Application with Iron Wall Mount Plate

This compact magnetic laser torpedo level is designed for low maintenance. To maintain its performance:

• Avoid exposing the tool to shock, continuous vibration, or extreme temperatures.
• Always store the tool indoors.
• Keep the tool free of dust and liquids. Clean with a soft cloth, slightly moistened with pure alcohol or water if necessary.
• Do not disassemble the tool, as this may expose the user to hazardous radiation.
• Do not attempt to change any part of the laser lens.

Maintenance

This compact magnetic laser torpedo level is designed for low maintenance. To maintain its performance:

• Avoid exposing the tool to shock, continuous vibration, or extreme temperatures.
• Always store the tool indoors.
• Keep the tool free of dust and liquids. Clean with a soft cloth, slightly moistened with pure alcohol or water if necessary.
• Do not disassemble the tool, as this may expose the user to hazardous radiation.
• Do not attempt to change any part of the laser lens.

Troubleshooting

Disposal

Caution: Batteries must not be disposed of with household waste. Dispose of batteries and the product appropriately according to national or local regulations.

Warranty

Two-Year Limited Warranty: This product is warranted to the original purchaser from the original purchase date for two years. Prexiso warrants this product to be free from defects in material and workmanship. If the product is believed to be defective within the warranty period, contact Prexiso customer service at info@prexiso-eu.com.

Warranty Exclusions: This warranty does not cover (1) part failure due to normal wear or product abuse; (2) alterations or modifications by unauthorized personnel, or failure to install/operate according to the manual; (3) products/parts used for rental, damage from shipping, accidents, abuse, acts of God, misuse, or neglect.

Prexiso will replace or repair the defective unit at its option, subject to verification of the defect. Implied warranties of merchantability and fitness for a particular purpose are limited to the duration of this warranty. Prexiso is not liable for loss of use or consequential damages.

This warranty excludes accessories. It provides specific legal rights, and other rights may vary by state.