Connection
Use the passive PoE adapter to simultaneously supply power and transmit data to a passive PoE device.
Diagram: The setup illustrates the connection of a passive PoE adapter. It shows passive PoE devices (represented by icons for an IP Camera, Access Point (AP), and Customer Premises Equipment (CPE)) connecting to the 'POE' port of the Passive PoE Adapter. The adapter's 'LAN' port connects to an Ethernet device, such as a switch or gateway. An AC Power Cord is plugged into the adapter and then into a wall outlet.
Note: Before connecting a passive PoE device, please check the required voltage in its product manual.
For technical support, replacement services, user guides, and more, please visit https://support.omadanetworks.com/.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Plug the product into the wall outlets with earthing connection through the power supply cord.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Declaration of Conformity
TP-Link declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
CE Regulatory Compliance | TP-Link
Omada Network Support
