OHAUS i-TME Weighing Modules
Designed for Static and Dynamic Applications Such as Tank and Vessel Weighing
Crafted from either alloy steel or stainless steel, the i-TME weighing module arrives pre-assembled for effortless installation. It is highly suitable for applications in tank weighing, level measurement, and vessel weighing systems.
Unique Features:
- ✔️ Choose between alloy steel load cell with mounting kit or stainless steel load cell with mounting kit for static and dynamic applications. The self-centering rocker pin guarantees repeatability.
- ✔️ 360 degree self-checking feature ensures comprehensive monitoring while lift-off & down stops enhance precision. Ground strap for safety & optional stabilizer for additional stability, optimizing weighing.
- ✔️ Simple installation options available for weighing module, allowing installation with or without load cell. Effortless maintenance - load cell is easily removable or installable with minimal lifting.
Specifications Comparison: i-TME vs i-TMES
The following table compares the specifications of the i-TME and i-TMES weighing modules across different series.
| Feature | i-TME | i-TMES |
|---|---|---|
| Weighing module material | Alloy steel, Powder-cated | 304 stainless steel, Electropolished |
| Rated capacity | 0.5t/1t/2t 5t | 0.5t/1t/2t 5t |
| Load cell model | LBZ4-CS | LBZ4-SS |
| Load cell material | Alloy steel, silicon sealed | Stainless steel, hermetically sealed |
| IP Rating | IP67 | IP68 |
| Accuracy class | C3 | |
| Maximum number of load cell intervals (nLC) | 3,000 | |
| Ratio of minimum LC verification interval Y= Emax/vmin | 10,000 | |
| Combined error (%FS) | ≤ ±0.020 | |
| Creep (%FS/30min) | ≤ ±0.016 | |
| Temperature effect on sensitivity (%FS/10 °C) | ≤ ±0.011 | |
| Temperature effect on zero (%FS/10 °C) | ≤ ±0.015 | |
| Output sensitivity (mV/V) | 3.0 ±0.003 3.0 ±0.008 | 2.0 ±0.004 2.0 ±0.002 |
| Input resistance (Ω) | 350 ±3.5 | 1000 ±10 |
| Output resistance (Ω) | 351 ±2 | 350 ±3.5 1000 ±10 |
| Insulation resistance (MΩ) | ≥ 5000 (50VDC) | |
| Zero balance (%FS) | ≤ ±1.0 | |
| Compensated temperature (°C) | -10 ~ +40 | |
| Operating temperature (°C) | -35 ~ +70 | |
| Excitation, recommended voltage (V) | 5~12 (DC) | |
| Excitation maximum (V) | 18 (DC) | |
| Safe overload (%FS) | 150 | |
| Ultimate overload (%FS) | 300 | |
| Cable length | 5 m |
Dimensional Diagrams
The weighing modules are available in different capacities and materials, with specific dimensions provided for 0.5t-2t and 5t versions. These diagrams illustrate key measurements such as A, B, C, D, F, L, A1, B1, C1, L1, H, H1, H2, H3, P, and S, which are crucial for installation and integration.
[Diagram Description: The diagrams show side and top views of the weighing modules, detailing various dimensions labeled A through S. Specific dimensions vary based on the model's capacity (0.5t-2t or 5t) and material.]
Accessories
Optional accessories are available to enhance the functionality and installation of the weighing modules:
- Mounting Plate Set, TMES 0.5-2t SS. (Part No. 30904122)
- Mounting Plate Set, TMES 5t SS (Part No. 30904123)
- Mounting Plate Set, TME 0.5-2t CS (Part No. 30904124)
- Mounting Plate Set, TME 5t CS (Part No. 30904125)
- Stabilizer, TMES 0.5-2t SS (Part No. 30904129)
- Stabilizer, TMES 5t SS (Part No. 30904130)
- Stabilizer, TME 0.5-2t CS (Part No. 30904131)
- Stabilizer, TME 5t CS (Part No. 30904132)
Product Specifications and Dimensions
The table below details specific product types, their materials, capacities, and dimensional measurements.
| Product Type | Material | Capacity (kg) | A | B | C | D | F | L | A1 | B1 | C1 | L1 | H | H1 | H2 | H3 | P | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| i-TMES500 | Electropolished 304 Stainless Steel | 500 | 114 | 124 | 114 | 17.5 | 17.5 | 185 | 89 | 89 | 89 | 152.4 | 115 | 13 | 20 | 15 | 11.5 | M10 |
| i-TMES1T | 304 Stainless Steel | 1000 | 114 | 124 | 114 | 17.5 | 17.5 | 185 | 89 | 89 | 89 | 152.4 | 115 | 13 | 20 | 15 | 11.5 | M10 |
| i-TMES2T | 2000 | 114 | 124 | 114 | 17.5 | 17.5 | 185 | 89 | 89 | 89 | 152.4 | 115 | 13 | 20 | 15 | 11.5 | M10 | |
| i-TMES5T | 5000 | 153 | 153 | 153 | 18 | 18 | 235 | 117 | 117 | 117 | 199 | 142 | 20 | 25 | 20 | 17.5 | M16 | |
| i-TME500 | Powder coated Q345 Steel | 500 | 114 | 124 | 114 | 17.5 | 17.5 | 185 | 89 | 89 | 89 | 152.4 | 115 | 13 | 20 | 15 | 11.5 | M10 |
| i-TME1T | 1000 | 114 | 124 | 114 | 17.5 | 17.5 | 185 | 89 | 89 | 89 | 152.4 | 115 | 13 | 20 | 15 | 11.5 | M10 | |
| i-TME2T | 2000 | 114 | 124 | 114 | 17.5 | 17.5 | 185 | 89 | 89 | 89 | 152.4 | 115 | 13 | 20 | 15 | 11.5 | M10 | |
| i-TME5T | 5000 | 153 | 153 | 153 | 18 | 18 | 235 | 117 | 117 | 117 | 199 | 142 | 20 | 25 | 20 | 17.5 | M16 |
Contact Information
For inquiries, please contact OHAUS Asia/Pacific Headquarters:
e-mail: APmarketing@ohaus.com
Tel: +86 21 64855408
OHAUS operates with offices throughout Europe, Asia, and Latin America, adhering to ISO 9001:2015 standards for its Registered Quality Management System.
