Teka TMW.18BI Microwave Exploded Diagram and Parts List
This document provides detailed exploded diagrams and component identification for the Teka TMW.18BI microwave oven, intended for service and repair reference.
Page 1: Cavity Assembly and Base Components
This diagram illustrates the main microwave cavity with the door open, showing the interior space. The base assembly, featuring the turntable support mechanism and feet, is presented separately below the main unit.
- Part 7: Main microwave chassis/body.
- Parts 10, 12: Internal components or structural elements within the cavity.
- Base Assembly: Includes components such as feet, a motor for the turntable, and various mounting hardware.
Page 2: Internal Components and Fan Assembly
This section focuses on internal components, including the cooling fan, its motor, control board area, and associated wiring harnesses. It shows a detailed view of how these parts are interconnected within the microwave's chassis.
- Part 3: Fan blade.
- Part 4: Fan motor.
- Part 2: Motor mounting bracket.
- Part 6: Likely a control board or power supply module.
- Part 13: Terminal blocks or electrical connectors.
- Part 9: Wiring harness or electrical cables.
- Part 7: Rear panel or chassis component.
- Part 8: Cable management element or grommet.
- Part 12: Additional wiring harness.
- Part 10: Likely a transformer or capacitor.
- Part 5: Screws or fasteners.
Page 3: Control Panel / Internal Bracket Assembly
This diagram showcases a panel with multiple mounting points and electrical connectors. It is likely related to the control interface or an internal chassis mounting structure.
- Part 1: A component with multiple connectors, possibly a main control module.
- Part 2: Another component with connectors, possibly a sub-module.
- Part 4: Electrical connectors or terminals.
- Part 3: Mounting points or clips.
- Part 6: A bracket or housing component.
- Part 5: Screws or fasteners.
Page 4: Front Panel and Door Mounting Details
This view illustrates the front section of the microwave, detailing how the front panel attaches to the main body. It includes components related to the control interface and the panel's structural mounting.
- Part 1: Main chassis or frame.
- Part 2: Mounting points or clips for the front panel.
- Part 3: Fasteners or connectors for the front panel.
- Part 4: Control knobs or buttons.
- Part 5: Decorative front panel or bezel.
- Part 7: A cover or trim piece.
Page 5: Door Assembly and Cavity Interior
This diagram presents the microwave door assembly and a view into the interior cavity, highlighting the door's mechanism and internal structural elements.
- Part 4: The main door assembly, including glass and frame.
- Part 8: Door seal or gasket.
- Part 7: Internal cavity components.
- Part 9: Door hinges or mounting points.
- Part 5: Control knobs.
- Part 6: Door latch mechanism.
Page 6: Main Internal Electrical and Mechanical Components
This comprehensive diagram shows the core internal workings of the microwave, including the magnetron, transformer, fan, and control box, illustrating their arrangement and connections.
- Part 7: Main microwave chassis/body.
- Part 4: Fan motor.
- Part 11: Fan shroud or housing.
- Part 6: Control box or housing.
- Part 13: Terminal blocks/connectors.
- Part 3: Magnetron (the component that generates microwaves).
- Part 2: High-voltage capacitor.
- Part 1: High-voltage diode.
- Part 8: Power transformer.
- Part 10: Power supply board or filter component.
- Part 12: Waveguide cover or internal shielding.
- Part 14: Interior lamp or light assembly.
- Part 5: Mounting hardware (screws, etc.).
Page 7: Turntable Support and Motor Assembly
This diagram details the base of the microwave cavity, focusing on the mechanism that supports and rotates the turntable.
- Part 1: Turntable motor.
- Part 2: Turntable support ring or roller assembly.
- Part 3: Mounting hardware for the motor.
- Part 4: Turntable coupling.
- Part 6: Base of the microwave cavity.
Page 8: Door Hinge and Mounting Details
This view illustrates the points where the microwave door attaches to the main body, specifically showing the hinge mechanisms and their mounting points.
- Part 5: Door hinges.
- Part 6: Mounting points on the microwave body for the hinges.
