Teka TMW 18 BI Microwave Oven
Explosion Diagrams and Assembly
This document provides detailed exploded view diagrams for the Teka TMW 18 BI microwave oven, illustrating the assembly of various components.
2. Explosion Diagrams / Explosion Diagram
This section presents detailed visual breakdowns of the microwave's construction.
2.1 Cavity Assembly / Montaje del Cuerpo
This diagram illustrates the main internal structure of the microwave, including the cavity, turntable support, and mounting points for internal components and the outer casing. Key numbered parts visible include:
- 10: Turntable support mechanism
- 12: Fan motor mounting area
- 7: Outer casing attachment points
Further components shown in related diagrams for this assembly include:
- 1: Main circuit board
- 3: Fan motor
- 4: Fan
- 6: Control panel housing
- 8: Transformer
- 9: Wiring harnesses
- 13: Electronic components on board
2.5 Door Assembly / Montaje de la Puerta
This diagram details the assembly of the microwave door, showing its frame, glass, handle mechanism, and hinge system. Key numbered parts include:
- 1: Door handle assembly
- 2: Door frame components
- 9: Hinge components
- 4: Door seal
- 8: Outer door panel/glass
- 7: Inner door structure
- 5: Door latch mechanism
2.6 Electric Components Assembly / Montaje de los Componentes Eléctricos
This diagram focuses on the internal electrical system, showing the placement and connection of major components such as the transformer, control board, fan motor, and associated wiring. Key numbered parts include:
- 1: Connection to the main control board
- 2: Fan motor
- 3: Fan
- 4: Light bulb
- 5: Light bulb holder
- 6: Mounting bracket for electrical components
- 8: High-voltage transformer
- 9: Wiring
- 10: Ventilation grille/fan
- 11: Terminal block
- 12: Wiring harness
- 13: Main circuit board
- 14: Power input connection
General Assembly Views
Additional diagrams show the overall assembly process, integrating the main cavity, door, and control panel into the final appliance structure.
- Diagrams show the attachment of mounting brackets (e.g., 3, 4) to the main microwave body (1), securing the unit.
- Illustrations also depict the placement of the turntable roller ring (3) and door seal (4) within the microwave cavity (5).
