TP-LINK TL-LS105G 5-Port Gigabit Desktop Switch User Manual

Important Safety Information

Warning!

Please read the user manual included in this work as it contains important information related to the safety of installation and use of the device. Only persons who have read the user manual may use the device. The user manual must be kept as it may be required in the future. The device is to be used exclusively for purposes specified in this user manual. The device must be unpacked prior to start-up. After removing the packaging, make sure the device is in working order. If the product has defects, it should not be used until it is repaired. The product is intended for use at home and commercial use and may not be used for other than intended use. The manufacturer is not liable for damages resulting from not adhering to the rules contained in the user manual; therefore, we recommend following the aforementioned safety rules for operation and maintenance of the device. In this way, you will ensure your safety and avoid causing damage to the device. The manufacturer and the supplier are not liable for losses or damages arising out of the product, including financial or intangible losses, loss of profits, income, data, pleasure from use of the product or other products related with it – indirect, incidental or consequential loss or damage. The above provisions apply whether the loss or damage concerns:

1. Deterioration of quality or the lack of operation of the products or products related with it due to damage, as well as the lack of access to the product when it is undergoing repair, which results in stoppage, loss of user's time, or a break in business activity;
2. Improper results of operation of the product or products related with it;
3. It applies to losses and damages according to any legal category, including negligence and other losses, termination of a contract, expressed or implied guarantee and strict liability (even if the manufacturer or the supplier was notified about the possibility of occurrence of such damages).

Safety Measures

Particular attention during design was directed to quality standards of the device, where ensuring safety of operation is the most important factor. The device must be secured against contact with caustic, staining, and viscous fluids.

The device was designed in such a way that it restarts operation when power supply is restored after a break.

Attention! We recommend using protections to further protect the device from possible overvoltages in installations. Surge protectors are effective protection against accidental pass to the device of voltages higher than the rated. Damages caused by passing voltages higher than specified in the manual are not under warranty.

Turn off the device before transporting it. Prior to connecting the device to a power source, check whether the supplied voltage is consistent with the rated voltage specified in the user manual.

Proper Product Disposal

A marking of a crossed-out waste bin [Recycling Symbol] indicates that the product may not be disposed of together with other household waste in the entire EU. To avoid possible damage to the natural environment or health due to uncontrolled waste disposal, it should therefore be handed over for recycling, propagating in this way sustainable use of natural resources.

To return a worn-out product, use a collection and disposal system for this type of equipment or contact the seller from whom it was purchased. It will then be recycled in an environmentally-friendly way.

Product Overview

The device is widely used in small computer networks and neighborhood networks.

Technical Specifications

Product Views

Front View

Side View

Rear View (Power Connector)

Package Contents

The package typically includes the switch and its power adapter.

Package Dimensions (L x W x H): 0x0x0 mm

Gross Weight: 0 kg