TP-Link LiteWave LS105G/LS108G Gigabit Desktop Switch Installation Guide

5/8-Port Gigabit Desktop Switch

LED Explanation

Power

On: Power on
Off: Power off or power supply is abnormal
Flashing: Power off or power supply is abnormal

Link/Act (Green)

On: Running at 10/100/1000Mbps
Off: No device is linked to the corresponding port
Flashing: Transmitting/receiving data

Connection

This section describes how to connect the switch. For simplicity, the LS108G is used as an example.

Diagram Description: The setup involves connecting the Internet to a Router's WAN port. The Router's LAN port connects to the LS108G switch. The LS108G features multiple Ethernet ports (e.g., 1-8) for connecting PCs. A Power Adapter is used to power the LS108G.

Frequently Asked Questions (FAQ)

Q1. The Power LED is not lit.

The Power LED should be lit when the power system is working normally. If the Power LED is not lit, check as follows:

A1: Make sure the power adapter is connected to the switch with power source properly.
A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
A3: Make sure the power source is ON.

Q2. The Link/Act LED is not lit when a device is connected to the corresponding port.

It is recommended that you check the following items:

A1: Make sure that the cable connectors are firmly plugged into the switch and the device.
A2: Make sure the connected device is turned on and works normally.
A3: The cable must be less than 100 meters long (328 feet).

Specifications

General Specifications

Standard	IEEE802.3, IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.1p
Protocol	CSMA/CD
Data Transfer Rate	Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex) Gigabit Ethernet: 2000Mbps (Full Duplex)
Network Media (Cable)	10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100 STP (maximum 100m) 100Base-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100 STP (maximum 100m) 1000Base-T: UTP category 5e cable (maximum 100m) EIA/TIA-568 100 STP (maximum 100m)
Interface	5/8 10/100/1000Mbps Auto-Negotiation RJ45 Ports
LED Indicators	Power, Link/Act LED
Advanced Features	QoS (802.1p/DSCP Priority)
Transfer Method	Store-and-Forward
MAC Address Learning	Automatically learning, automatically aging
Frame Forward Rate	10Base-T: 14881pps/Port 100Base-TX: 148810pps/Port 1000Base-T: 1488095pps/Port
Wall Mountable	Yes
Distance Between Mounting Holes	LS105G: 76mm LS108G: 65mm

Environmental and Physical Specifications

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Operating Humidity	10% to 90%RH non-condensing
Storage Humidity	5% to 90%RH non-condensing

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended by TP-Link.
The adapter shall be installed near the equipment and shall be easily accessible.

Declarations of Conformity

TP-Link declares that this device complies with essential requirements and relevant provisions of EU directives (2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863). The original EU declaration of conformity can be found at https://www.tp-link.com/en/support/ce/.

TP-Link declares that this device complies with the essential requirements and relevant provisions of the UK Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity can be found at https://www.tp-link.com/support/ukca/.

Further Information and Support

For questions, answers, and community interaction with TP-Link users and engineers, visit the TP-Link Community.

For technical support and other information, visit TP-Link Support.

	TP-Link LiteWave LS105G/LS108G Gigabit Desktop Switch Installation Guide Installation guide for TP-Link LiteWave LS105G and LS108G 5/8-Port Gigabit Desktop Switches. Includes LED explanations, connection diagrams, FAQ, and specifications.
	TP-Link Gigabit Desktop Switch Installation Guide: TL-SG105, TL-SG108, TL-SG116 Installation guide for TP-Link's 5/8/16-Port Gigabit Desktop Switches (TL-SG105, TL-SG108, TL-SG116). Covers LED explanations, connection setup, technical specifications, FAQs, safety information, and compliance.
	TP-Link LiteWave LS105G/LS108G Gigabit Desktop Switch Installation Guide Installation guide for TP-Link LiteWave LS105G and LS108G 5/8-Port Gigabit Desktop Switches. Includes LED explanations, connection diagrams, and troubleshooting FAQs.
	TP-Link LiteWave Series Ethernet Switches Datasheet Datasheet for TP-Link LiteWave series unmanaged Ethernet switches, detailing features, specifications, and network diagrams for models LS105G, LS108G, LS1005G, LS1008G, LS1005, and LS1008.
	TP-Link LiteWave: Conmutadores Ethernet para Hogar y Oficina \| Ficha de Datos La serie TP-Link LiteWave ofrece conmutadores Ethernet no administrados que proporcionan una forma sencilla y asequible de ampliar redes cableadas para el hogar y la oficina. Estos dispositivos son fiables, fáciles de usar y cuentan con tecnología plug-and-play, permitiendo ampliar conexiones de red a múltiples dispositivos instantáneamente. Incluyen características como Auto-MDI/MDIX, que elimina la necesidad de cables cruzados, y tecnología de eficiencia energética para ahorrar energía y dinero.
	TP-LINK TL-LS105G 5-Port Gigabit Desktop Switch User Manual User manual for the TP-LINK TL-LS105G 5-Port Gigabit Desktop Switch, covering safety, specifications, and proper disposal. Learn how to safely install and use your network switch.
	TP-Link Omada DS110GMP 10-Port Gigabit Desktop Switch Installation Guide Installation guide for the TP-Link Omada DS110GMP 10-Port Gigabit Desktop Switch with 8-Port PoE+. Covers LED explanations, switch functions, connection diagrams, troubleshooting, specifications, and compliance information.
	TP-Link TL-SX105 5-Port 10G Multi-Gigabit Desktop Switch Installation Guide Comprehensive installation guide for the TP-Link TL-SX105, a 5-port 10G Multi-Gigabit Desktop Switch. Provides instructions on setup, connection, panel explanations, specifications, and answers frequently asked questions.