Artika Essence 3™ 3-Light LED Vanity

Included Parts

What You Will Need

• Screwdriver (Tournevis / Destornillador)

Important Information & Safety

CAUTION: If using a dimmer, it must be LED compatible.

IMPORTANT: The installer and/or user must read, understand, and follow these instructions before installing the product. This product must be properly installed before it is used. Failure to follow instructions may void the warranty. It is recommended that this product be installed by a certified electrician.

This product is compatible with most LED dimmers.

WARNING: Risk of electrical shock. Turn off breaker at the panel. Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance. Do not use outdoor.

Step-by-Step Installation

1. Turn off power at the circuit breaker and light switch. Ensure power is off before removing the old fixture.
2. Remove the mounting bracket from the light fixture. Install the mounting bracket to the junction box using the junction box screws (See Figure 1).
3. Attach the hook to the mounting bracket (See Figure 2).
4. Connect the wiring: White wire (N) from fixture to white supply wire (N) from junction box using a wire connector. Black wire (L) from fixture to black supply wire (L) from junction box using a wire connector. Ground wire (G) from fixture to ground supply wire (G) from junction box using a wire connector (See Figure 2).
5. Push wires into the junction box. Mount the light fixture onto the mounting bracket and secure with support screws. Ensure screws are secured into the canopy (See Figure 3).
6. Restore electrical power.
7. Position and hold the outer glass cylinder on the canopy. Screw the inner glass diffuser to the canopy (See Figure 4). Repeat for all 3 lights. Mount the fixture to the wall before screwing any glass diffuser.

Figure 1: Illustration showing a junction box (not included), a mounting bracket, junction box screws, and a screwdriver. The mounting bracket attaches to the junction box using screws.

Figure 2: Illustration depicting the mounting bracket with a hook attached. It shows wire connections: white wire (N) from fixture to white supply wire (N) from junction box, black wire (L) from fixture to black supply wire (L) from junction box, and ground wire (G) from fixture to ground supply wire (G) from junction box, all using wire connectors.

Figure 3: Illustration showing the light fixture being mounted onto the bracket and secured with support screws into the canopy. A screwdriver is shown tightening a support screw.

Figure 4: Illustration demonstrating how to attach the glass components. It shows placing the outer glass cylinder onto the canopy, then screwing the inner glass diffuser into the canopy. This process is repeated for all three lights.

Replacement Parts

To order replacement parts, please contact Customer Service. (Service available only in the USA and Canada)

Warranty Information

Artika For Living Inc. offers a three-year (3) limited warranty on manufacturing defects for residential use. The warranty is extended to the original owner in the USA and Canada and is non-transferable. It does not apply to retailers or commercial applications. The original sales receipt is required for all warranty claims. The remedy is product or part replacement at Artika's discretion, not exceeding the original purchase price.

This warranty is valid only on products installed in accordance with building codes and the provided instruction manual. It does not cover products installed incorrectly or subjected to abnormal use. Normal wear and tear, misuse, negligence, vandalism, improper maintenance, accidents, fire, flood, theft, acts of God, or product alteration are not covered. Accessories like bulbs or batteries are excluded.

The warranty does not cover handling, labor, transportation, or other installation/replacement costs. It is valid in the country of purchase from Artika authorized retailers.

Artika for Living Inc. is not responsible for direct or consequential damages or injuries related to improper use or installation.

Visit www.artika.com to discover more about Artika for Living Inc.

FCC Compliance

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1. This device does not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Customer Service

Artika For Living Inc.
1756, 50th Avenue
Montréal (Lachine), Quebec
Canada H8T 2V5

Customer Service: Monday to Friday, 9 a.m. - 5 p.m. EST

Phone: 1-866-661-9606

Email: support@artika.com

Website: www.artika.com