Artika OPDT-OPC-HD2BL LED Pendant Light

Included Hardware

What You Will Need

Screwdriver ?

Sealant ?

Installation Steps

Step 1: Mounting Bracket Installation

Attach the mounting bracket (A) to the junction box using junction box screws (B).

Step 2: Height Adjustment

Adjust the suspension wire length for the LED pendant light (F). To retract the wire, pull upwards ⬆️. To extend the wire, pull downwards ⬇️.

Step 3: Wire Connection

Connect the ground wire (GND), white wire (N), and black wire (L) using wire connectors (C).

Step 4: Light Colors Adjustment

Select desired light color temperature: 3000K, 4000K, or 5000K using the adjustment mechanism.

Step 5: Canopy Installation

Secure the canopy to the ceiling using canopy screws (D) and rubber washers (E).

Step 6: Ring Adjustment

Adjust the position of the decorative ring using the provided tool (G) on the suspension wires (F).

Step 7: Sealant Application

Apply sealant around the canopy edge using a sealant gun for a finished look.

Important Safety Information

Caution

If using a dimmer, it must be LED compatible.

Important

Read and understand all instructions before installation. Ensure the product is installed correctly. Failure to follow instructions may void the warranty and the manufacturer is not responsible for issues arising from improper installation or use. Installation by a certified electrician is recommended, and may be legally required in some regions.

Warning: Risk of Electrical Shock

Turn off the main electrical supply at the breaker panel before installing or performing maintenance. ⚡

FCC Compliance (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1. It may not cause harmful interference. 2. It must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and complies with Class B digital device limits, designed for reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation, or using a different circuit. Consult a dealer or technician for assistance.

IC Compliance (Canada)

Operation is subject to two conditions: 1. The device must not cause harmful interference. 2. The device must accept any radio interference, even if it compromises its operation.

Warranty Information

Artika For Living Inc. offers a three (3) year limited warranty on manufacturing defects for residential use, valid for the original owner in the USA and Canada. The original sales receipt is required for claims. The warranty covers product or part replacement at Artika's discretion, not exceeding the original purchase price. It is valid only for products installed according to building codes and the provided manual. It does not cover misuse, accidents, normal wear and tear, or accessories like bulbs/batteries. Labor, transportation, and installation costs are not covered. Artika is not responsible for direct or consequential damages from improper use or installation. Visit www.artika.com for more information.

Contact Information

Artika For Living Inc.

1756, 50th Avenue

Montréal (Lachine), Québec

Canada H8T 2V5

Phone: 1-866-661-9606

Email: support@artika.com

Website: www.artika.com

Customer Service: Monday to Friday, 9 am - 5 pm EST