Medic Therapeutics Neck Pain Management LED Light Therapy
User Manual
ABOUT:
Red LED light has anti-inflammatory and anti-swelling properties, which can accelerate the healing of acute and chronic inflammations like, wounds and ulcers. LED red light is believed to improve cell metabolism and blood circulation, increase white blood cell phagocytosis (removal of pathogens and harmful cell debris) thereby improving immunity while accelerating cell repair.
LED blue light is believed to be an effective measure for healing topical inflammations and concerns such as acne. The device is ideal for addressing and relieving inflammation, swelling, pain or discomfort, and acne while promoting better circulation.
PRODUCT SPECIFICATIONS:
| Wavelength | red light 630nm±10nm, blue light 465nm±10nm |
| Power density of single LED beam | ≤10mW/cm² |
| Power instability | ≤10% |
| Output power reproducibility | ≤10% |
| Rated input power | ≤100VA |
| Type of against electric shock | Class I |
| Degree of against electric shock | Class B |
| Waterproof | IPX0 |
| Please do not use machine in the environment with explosive anesthetics or flammable substances. | |
| Working mode | Continuous |
| Temperature of Environment | 5°C~40°C |
| Humidity | ≤80% |
| Atmospheric pressure | 86kPa~106kPa |
DEVICE STRUCTURE:
The device consists of the LED module, light probe, timer and charging jack.
The main unit, referred to as the "host," is a neck-worn device. A separate "power adapter" is also included for charging.
PART SPECIFICATIONS:
The device consists of the LED module, light probe, timer and charging jack.
- Switch: Used to change LED light color and treatment modes.
- Indicator Light: Shows the device's status.
- Charging Jack: Port for connecting the power adapter.
- On/Off: Button to turn the device on and off, and to pause/resume treatment.
- Light Probe: Emits the red and blue LED light therapy. Multiple probes are integrated into the device.
DEVICE OPERATION:
Setup:
- Connect the power cable to the device and power adapter, then plug into an outlet.
- Open the device and place it comfortably on the neck, paying careful attention to the direction of the opening angle. Do not exceed the maximum angle. Do not forcefully stretch the silicone feature, as this can damage the device.
Function Setting and Button Operation Instructions:
- Press and hold the "On/Off" button for 3 seconds to turn on the device. The buzzer will emit a "beep" sound, and the blue indicator light will illuminate.
- The default treatment output is red light therapy. Press the "On/Off" button quickly to start or resume red light therapy. To pause the treatment, press the "On/Off" button again. The blue indicator light remains on during operation.
- Quickly press the "Switch" button to change the LED light color and switch between different light treatments.
Operation Controls:
- Press and hold the "On/Off" button for 3 seconds to turn the device off. The buzzer will emit a "beep" sound, and the blue indicator light will switch off.
- The device will automatically switch off after 30 minutes of continuous use.
- When not in active use, the device will automatically switch off after 70 seconds.
CHARGING INSTRUCTIONS:
- Prior to the first 3 uses, charge the lithium battery for 10 full hours.
- The device buzzer will emit a "tick" sound when the battery is low. While charging, the red indicator light will remain on. When fully charged, the light will turn green.
TREATMENT RECOMMENDATIONS:
Gently wrap the device around your neck. For initial use, apply blue LED light therapy for 5-10 minutes, then switch to red LED light therapy for 20-30 minutes.
ADDITIONAL INDICATIONS:
⬆️[Upward arrows] ☔[Keep dry] [Fragile] ⚠️[Caution] ?️[Do Not Dispose] CE[CE Mark]
PRECAUTIONS:
- Do not use if you are allergic to light.
- If you are pregnant or using the device on a child, always consult your doctor first.
- Do not use in cases of cerebral hemorrhage.
TROUBLESHOOTING:
| Issue: | Cause: | Solution: |
|---|---|---|
| Indicator light does not come on after pressing and holding the On/Off button. | No power. Battery is damaged. Button is damaged. | Charge with correct adapter. Contact manufacturer for repair information. |
| LED light does not illuminate. | No power. LED module is damaged. | Make sure device is charged and the power is on. Contact Manufacturer for repair information. |
| Weak or no LED output. | LED light has weakened over time with use. | Contact manufacturer for repair. |
MAINTENANCE:
- If device malfunctions, refer to “Troubleshooting”. If the problem persists, contact the manufacturer. Do not disassemble or repair by yourself, as your warranty will be voided.
- Clean the device using a cloth and gentle cleaner. Do not use organic solvents, gasoline, etc.
- Store the device in a clean and hygienic area. Avoid bumping, dropping, or excessive bending; always handle with care.
- Use alcohol to gently clean the light probes and light-emitting port. DO NOT soak in liquid or use hard or abrasive objects to remove stains.
- To extend the life of the device, keep it away from humidity, high temperatures, and direct exposure to sunlight.
- To avoid scratching, do not use any kind of hard object or place on a rough surface.
- Do not change the fuse; contact the manufacturer if necessary.
Note: May cause harmful radiation exposure if all instructions are not adhered to.
TRANSPORT AND STORAGE:
Avoid vibrations, rain, snow, water, or splashing during transportation. The device should be stored in a cool, low humidity (no more than 80%) environment with good ventilation. Avoid corrosive gas exposure.
WARNINGS:
- Do not look at the LED beam directly, as serious eye damage can occur.
- Review all safety and instructional information prior to use.
- Do not use in the same place over an extended, constant period of time. Discontinue use in the event of discomfort or overheating on the skin.
- Use only as intended and on the intended area only. Misuse will result in voiding the warranty.
- To avoid injury or accidental eye damage, keep out of reach of children at all times.
- Do not disassemble.
- Please do not use it in an environment with explosive anesthetics or other flammable substances.
- Do not use if you have a pacemaker, as the device can interfere with the pacemaker's function.
- Immediately stop using the machine if you feel thirsty, have dry eyes, a quickened pulse, or dizziness. If these symptoms persist after taking a break, discontinue use and consult your doctor.
LIMITED LIFETIME WARRANTY:
Your Medic Therapeutics Neck Pain Management LED Light Therapy device is backed by a limited lifetime manufacturer's warranty. Medic Therapeutics will repair or replace your device at any time should it fail due to a defect in material or workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that results from unauthorized or improper use, service, or repair. Further, it does not cover damage caused by accident, impact, negligence, or normal wear and tear. Should you discover your Medic Therapeutics Neck Pain Management LED Light Therapy device is not functioning properly, please send your device to our repair center for evaluation. If your product cannot be repaired or serviced, Medic Therapeutics reserves the right to exchange it for a similar or newer model.
Please note that a flat rate of $35.00 will be charged to cover a service evaluation fee and return shipping of your device. All warranty claims must be accompanied by a copy of your proof of purchase from an authorized retailer. Please send your device, proof of purchase, and a check or money order in the amount of $35.00 made out to Medic Therapeutics to:
Address:
Medic Therapeutics Service Center
3069 Taft Street
Hollywood, FL 33021
Contact:
warranty@medictherapeutics.com
