Kohler Plumbing Fixture Parts Diagram and Component List
This document presents an exploded view of plumbing fixture components, detailing various parts and their assembly relationships. The primary component is a central vertical shaft.
Component Assembly Overview
The diagram illustrates the arrangement of parts for a Kohler fixture. Key components are identified by part numbers.
Top Assembly
At the top of the assembly, a group of fasteners and small parts is designated by the part number 1023365.
Components are shown stacked vertically, indicating their order of installation onto the upper end of the central shaft:
- Cap or Seal: 1400046**
- Washer or Gasket: 34300
- Component: 1463739**
- Seal or O-ring: 1033803
- Washer or Gasket: 34300
- Component: 1400050
- Housing or Cylinder: 1463740
Dashed lines connect these parts to the main shaft, signifying their intended placement.
Mounting and Side Components
A mounting bracket assembly is depicted to the left of the upper shaft, connected via a dashed line, indicating its function in securing the fixture.
A cylindrical component, identified as 1394691**, is shown to the right of the upper shaft, also connected by a dashed line, suggesting its integration with the shaft assembly.
Lower Assembly
Towards the bottom of the shaft, a component labeled 1400064 is presented with associated parts 42451 and 832751. These are connected by dashed lines to the shaft, representing a lower connection or assembly point.
A final small component, part number 1128483, is illustrated at the very bottom of the diagram.
