Kohler Parts Diagram: Assembly Components and Part Numbers
This document provides a visual breakdown of components for a Kohler product, detailing part numbers and their arrangement in an assembly. The primary language is English.
Overall Assembly Description
The diagram illustrates a central vertical rod or tube, serving as the main structural element for the assembly. Various components are attached to or inserted into the top and bottom ends of this rod, with an additional component connecting to its side.
Top Assembly Components
The following parts are shown connecting to the upper section of the central rod:
- Part 1400046**: A cap or fitting.
- Part 34300: A washer or seal.
- Part 1463739**: A component with a threaded connection.
- Part 1033803: A screw or fastener.
- Part 34300: Another washer or seal.
- Part 1400050: A sleeve or bushing.
- Part 1463740: A retaining ring or clip.
Side Component Connection
A separate component, labeled 1394691**, is indicated by a dashed line to connect to the side of the vertical rod, near the top assembly.
Bottom Assembly Components
The following parts are shown connecting to the lower section of the central rod:
- Part 34300: A washer or seal.
- Part 1400052: A cartridge or valve body.
- Part 34300: Another washer or seal.
- Part 1033803: A screw or fastener.
- Part 1400053**: A retaining nut or cap.
- Part 1463741: A base or mounting bracket.
Associated Hardware
An inset diagram, labeled 1023365, displays two fasteners (screws) and a small bracket or clip, likely for mounting or securing the assembly.
