[Aspen Pumps Logo]
Compact 4L ERRP
CONDENSATE REMOVAL PUMP
Our Compact 4L Economy Retail Refrigeration Pump is designed exclusively to fit underneath retail refrigeration cabinets allowing for the removal of defrost and contaminated water.
190 L/h max. flow
35m max. head
Key Features
- Lightweight & slim
- Low voltage at point of use
- 2-stage filter to prevent growth and spread of biofilm
- Plug & Play
Suitability
- Refrigeration units; cold store cabinets
- Perfect for... Single & multiple refrigeration units
Image of the Aspen Pumps Compact 4L ERRP condensate removal pump, showing its compact, white casing with grey accents and tubing.
Diagram showing the dimensions of the Compact 4L ERRP pump. The overall length is 530mm. The width is 242mm, and the height is 75mm. A weight indicator shows 2.82 kg.
Technical Specifications (@ 230 VAC 50Hz)
| Max. flow | 190 L/h @ 0 head |
| Max. rec. head | 35m |
| Tank capacity | 4.2L |
| Sound level @ 1m | 60 dB(A) |
| Power supply Input: Rated | 100~240V AC 50/60Hz |
| Class | II appliance |
| Max. ambient temp. | 40°C / 104°F |
| Inlet/Outlet | 40mm in, 10mm out |
| IP Protection | IPX4 |
| Safety Switch | 3A NC/NO |
| Thermal protection | ✔️ |
| Flammable refrigerant compatibility | Designed to minimise spark risk |
| Equipment communication | Modbus RTU (option extra: FP3555) |
Performance Graph
Graph titled 'Recommended max. head 35m'. The Y-axis is labeled 'METRES HEAD' ranging from 0 to 50. The X-axis is labeled 'LITRES PER HOUR' ranging from 0 to 250. A curve shows that at 0 litres per hour, the maximum head is 35 meters. As the flow rate increases, the maximum head decreases, reaching approximately 10 metres at 200 litres per hour.
SUGGESTED XTRA ACCESSORIES
Vinyl Tube Braided 3/8" (10 mm) Image of a flexible vinyl tube with braided reinforcement, 3/8 inch (10 mm) diameter. | AX5101 |
Jallystrips Image of Jallystrips, a product for securing tubing, shown with a mobile phone interface. | S010371 |
For more installation accessories take a look at our Aspen Xtra range.
IN THE BOX
- Low Profile ERRP pump
- 2m Plug & Play power cable
- 1 1/2" BSP connector (for 40mm ID waste pipe)
- Install manual
