Rienok S1 mini Portable Bluetooth Speaker

Package Contents

• Rienok S1 MINI Bluetooth Speaker *1
• USB Type-C Charging Cable *1
• AUX Cable *1
• User Manual *1
• Lanyard *1

Technical Specifications

Function Description

• Lanyard Hole: For attaching a lanyard.
• '+' Button: Short press for Volume +, Long press for Next song.
• Play Key: Short press for Play/Pause. Accept/End phone call. Double press to change/turn off RGB Light.
• '-' Button: Short press for Volume -, Long press for Previous song.
• Bass Button: Press to switch to bass enhancement effect, press again to return to normal sound effect.
• Power Key: Press and hold for 2s to turn on/off. Double press to check battery level. Short press to switch modes (Bluetooth, Micro SD, AUX-In). Long press for 8s for system reset.

Operation

1. Charging: Ensure the speaker is fully charged.
2. Power On: Press and hold the Power button for 2 seconds. The Bluetooth indicator will flash, waiting for pairing.
3. Connect Device: Go to your device's Bluetooth page, find and connect "Rienok S1mini". The Bluetooth indicator will stay on when connected.
4. Play Music: Play your music. The Bluetooth speaker will automatically connect your device next time.

Interface Connection

• Micro SD Card Play: Insert SD card when power on to play songs.
• Aux In: Connect audio cable to enter Aux In mode automatically.
• USB Type-C Charging Cable: Use DC 5V-1A adapter for charging. Red indicator means charging, off means fully charged.
• Data Access: Insert SD card when power off, connect to PC with data cable, short press Power button to enter SD card mode to copy music files.
• Battery Level: Double-click Power button. Green light for 2s indicates >65% battery, orange for 30-65%, red for <30% (needs charging).

Bluetooth Connecting

1. Power on the speaker by long-pressing the power button for 2 seconds. The Bluetooth indicator will flash, waiting for pairing.
2. Go to your device's Bluetooth page, find and connect "Rienok S1mini". The Bluetooth indicator will stay on when connected.
3. Play your music. The Bluetooth speaker will automatically connect your device next time.

True Wireless Stereo (TWS) Connection

1. Turn on two Bluetooth speakers. Disconnect any previous Bluetooth device. Ensure both speakers are in pairing status.
2. Select one speaker and press '+' and '-' buttons simultaneously. A prompt tone indicates TWS pairing mode. Another prompt tone confirms successful pairing.
3. Connect to your Bluetooth device as described in the Bluetooth Connecting section.
4. To disconnect TWS, press '+' and '-' buttons simultaneously on one speaker. A prompt tone will confirm disconnection.

Tips:

• The first speaker you press '+' and '-' on becomes the main speaker (left channel), the other is the secondary speaker (right channel).
• TWS function supports only two Rienok S1mini speakers.
• The speakers will maintain their master/slave relationship and reconnect TWS automatically on next power-on.
• Once TWS is connected, the secondary speaker's LED stays on, while the main speaker's LED indicates playback, pause, and Bluetooth connection status.
• Operating one speaker will result in synchronous operation of the other.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

After-Sales Service

For any questions during use, please contact Rienok via the provided email addresses for the most satisfying solution and service.

• Website: http://www.rienok.com
• E-mail: support-uk@rienok.com, support-us@rienok.com, support-ca@rienok.com, support-de@rienok.com, support-fr@rienok.com, support-es@rienok.com, support-it@rienok.com