Rienok S1 Mini Portable Bluetooth Speaker
User Manual
01 Packing List
The package includes:
- Rienok S1 MINI Main Speaker Body *1
- USB Charging Cable *1
- AUX Cable *1
- User Guide *1
- Lanyard *1
Product Image: A line drawing of the Rienok S1 Mini portable Bluetooth speaker, a cylindrical device with buttons on the side and the Rienok logo visible.
02 Technical Parameters
| Basic Parameters | |
|---|---|
| Bluetooth Version | 5.3 |
| Micro SD Card | Supports up to 32GB TF card |
| Charging Voltage | 5V 1A |
| Technical Parameters | |
|---|---|
| Speaker Unit | 50mm*2 |
| Output Power | 30W THD1% |
| Transmission Frequency | 2.4G~2.48G |
| File Formats | MP3, WMA, WAV, FLAC, APE |
Device Diagram: A diagram showing the Rienok S1 Mini speaker with buttons labeled: '+', '-', 'Bass', 'Power/Play/Pause', and 'AUX'.
03 Button Functions
- Lanyard Hole: For attaching a lanyard.
- '+' Button: Short press for Volume +, Long press for Next Song.
- Play/Pause Button: Short press for Play/Pause, Answer/End Call. Long press to reject call. Double press (x2) to switch/turn off RGB light. Press for 2s to disconnect Bluetooth.
- '-' Button: Short press for Volume -, Long press for Previous Song.
- Bass Button: Press to activate bass enhancement effect, press again to return to normal sound.
- Power Button: Press and hold for 2 seconds to turn on/off. Double press (x2) to check battery level. Short press to switch modes (Bluetooth, Micro SD, AUX-In). Press and hold for 8 seconds for system reset.
04 Operation
RGB Light: Quickly double-press the play button to turn on/off or switch RGB light modes (RGB breathing light mode and RGB light synchronized with rhythm).
Connection Steps:
- Step 1: Fully charged.
- Step 2: Press and hold the power button for 2 seconds to turn on.
- Step 3: Connect the device.
- Step 4: Play and enjoy music.
Connection Details:
- Bluetooth connection
- AUX cable connection
- Micro SD card slot
05 Interface Connection
Micro SD Card Playback: Insert the SD card when powered on to play songs from the SD card.
Aux In: Connect the audio cable, and it will automatically enter Aux In mode.
USB Type-C Charging Cable: Use a DC 5V-1A adapter for charging.
Data Access: Insert the SD card when powered off, use the data cable to connect to a PC. Briefly press the power button to enter SD card mode, then you can copy music files to the Micro SD card.
Battery Level Indicator: Double-click the power button. If the RGB light is green for 2 seconds, the battery is over 65%. If the RGB light is orange, the battery is between 30-65%. If the light is red, the battery is below 30% and needs charging.
Charging Indicator: Shows the charging status.
06 Bluetooth Connection
Steps:
- Step 1: Turn on the speaker by pressing and holding the power button for 2 seconds. The Bluetooth indicator will flash, waiting for pairing.
- Step 2: Go to your device's Bluetooth page, find and connect to "Rienok S1mini". The Bluetooth indicator will remain on when connected.
- Step 3: Play your music.
Suggestion: The Bluetooth speaker will automatically connect to your device the next time.
QR Code: A QR code is provided, likely for more information or direct download of the manual.
07 TWS WIRELESS SERIES FUNCTION
- TWS Connection Operation: Turn on two Bluetooth speakers, disconnect any previous Bluetooth device. Ensure both speakers are in pairing mode. Select one speaker and press "+" and "-" simultaneously. When you hear a prompt tone, the two speakers enter pairing mode. When you hear another prompt tone, pairing is successful.
- Connect to Bluetooth Device: Turn on your device's Bluetooth, find and connect to "Rienok S1mini". When you hear a prompt tone, the connection is successful. The LED light will remain on.
- TWS Disconnection Operation: Select one of the speakers and press "+" and "-" at the same time. When you hear a tone, the two speakers are disconnected.
Tips:
- When using the TWS function, the first speaker you press "+" and "-" on is the main speaker (left channel), the other is the secondary speaker (right channel).
- Only supports two Rienok S1mini speakers under TWS connection.
- They will maintain the previous master/slave relationship and reconnect TWS when powered on next time.
- Once TWS is connected, the LED of the secondary speaker will remain on, while the LED of the main speaker indicates playback, pause, and Bluetooth connection status.
- Once TWS is connected, operate one speaker, and the other will function synchronously.
After-Sales Support
If you encounter any problems during use, please contact us via the following email. We will provide you with the most satisfactory solutions and services.
Website: http://www.rienok.com
E-mail: support-it@rienok.com
