1. Package Contents
The package typically includes the Ubiquiti UNVR-4 unit, a power adapter, an Ethernet cable, mounting brackets, and screws.
2. Prepare Mounting Hardware
Identify the included mounting brackets and screws. Note the different sizes (e.g., 3.5 inch, 2.5 inch) which may correspond to different mounting configurations or drive sizes if applicable.
3. Mount Brackets
Attach the mounting brackets to the desired surface or rack, using the provided screws. Ensure they are securely fastened.
4. Install UNVR-4 Unit
Slide the Ubiquiti UNVR-4 unit onto the mounted brackets until it is securely in place.
5. Connect Cables
Connect the power adapter to the UNVR-4 and a power outlet. Connect an Ethernet cable from the UNVR-4 to your network switch or router.
6. Rack Mounting (Optional)
If using rack-mount rails (not explicitly shown but implied by diagram), install the UNVR-4 into a standard 19-inch equipment rack.
7. Network and Software Tools
Ensure your network is properly configured with an Internet connection, Gateway, and Switches. For initial setup and management, you can use:
- [Ubiquiti logo] Ubiquiti Device Discovery Tool: To find the UNVR-4 on your network.
- [Ubiquiti logo] UniFi Protect: For video surveillance management.
- [Ubiquiti logo] UniFi Network: For general network management.
- [Ubiquiti logo] UNVR: The device itself.
Mobile applications are available for download:
8. Initial Configuration and Access
Access the UNVR-4's configuration interface via a web browser by navigating to its IP address (e.g., 123.123.1.23) or through the UniFi mobile applications. Follow the on-screen prompts to complete the setup, which may include creating an account, configuring network settings, and adding cameras.
Recommended browser: Google Chrome.
Support
For further assistance and to get answers to your questions, visit the Ubiquiti community forum at community.ui.com.
