Spektrum S1400 G2 AC Smart Charger (1 x 400W)

Important Safety Information

Special Meanings: The following terms are used throughout the product literature to indicate different levels of hazard when operating this product:

• WARNING: If these procedures are not followed correctly, there is a high probability of property damage, collateral damage, and serious injury OR a high probability of superficial injury.
• CAUTION: If these procedures are not followed correctly, there is a high probability of property damage AND the risk of serious injury.
• NOTICE: If these procedures are not followed correctly, there is a possibility of property damage AND little or no risk of injury.

Not suitable for children under 14 years. This is not a toy.

WARNING: Read the ENTIRE instruction manual to become familiar with the product's features before operating. Improper operation can result in damage to the product or personal property, or cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. If this product is not operated in a safe and responsible manner, it can result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt to disassemble, use with incompatible components, or modify the product in any way without authorization from Horizon Hobby, LLC. This manual contains instructions for safety, operation, and maintenance. It is essential to read and follow all instructions and warnings in the manual before assembly, setup, or use to ensure proper operation and avoid damage or serious injury.

Warranty Registration: Please register your product at www.spektrumrc.com/registration.

NOTICE: This application is not suitable for persons with reduced physical, sensory, or mental capabilities, or lack of experience, unless they are supervised and instructed by a person responsible for their safety.

DANGER! Please follow these instructions carefully to minimize the risk of short circuits or fire.

General Battery Charging Warnings

WARNING: Inattention or incorrect use of the product in conjunction with the following warnings can lead to malfunctions, electrical disturbances, excessive heat development, FIRE, and fatal injuries and property damage.

• NEVER leave the power supply, charger, and battery UNATTENDED during operation.
• NEVER attempt to charge deeply discharged, damaged, or wet batteries.
• Never charge battery packs consisting of different cell types.
• Never allow children under 14 years to charge batteries.
• Never charge batteries in extreme heat or cold, or in direct sunlight.
• Do not charge batteries with damaged, punctured, or shortened cables.
• Never connect the charger if the cable is punctured or shortened.
• Never connect the charger to a 12 Volt car battery with the engine running.
• Never attempt to disassemble the charger or operate a damaged charger.
• Never connect the charger to both an AC and a DC power source simultaneously.
• Never connect the DC input to an AC power source.
• Only use rechargeable batteries that are suitable for charging with this charger.
• Always inspect the battery before charging.
• Keep the battery away from materials that can be affected by heat.
• Always monitor the charging process and have a fire extinguisher ready at all times.
• Immediately stop charging if the battery becomes too hot to touch, or if its shape changes (swells).
• Connect the charging cable to the charger first, then the battery, to avoid reverse polarity. Disconnect the connection in the reverse order after charging.
• Always connect the positive red (+) terminals and negative black (-) terminals correctly.
• After charging, disconnect the battery from the charger and allow the charger to cool down between charging cycles.
• Always charge in well-ventilated areas.
• In case of malfunction, immediately stop all processes and contact Horizon Hobby.

WARNING: Never leave the charger unattended. Never exceed the maximum charging current. Never charge unsuitable batteries or batteries in the wrong mode. Incorrect or improper operation can lead to excessive heat, fire, or fatal injuries.

CAUTION: Please always ensure that the batteries used match the charger's specifications and that the charger's settings are correctly configured. Failure to do so can lead to excessive heat and further malfunctions, which can cause personal injury or property damage. Please contact Horizon Hobby or an authorized dealer if you have questions about battery compatibility.

Specifications

Diagram Description

The charger features the following ports and controls:

• A: Power Switch
• B: AC Input (100-240 V)
• C: USB Input (Update Port)
• D: USB Output (Power Port)
• E: Screen
• F: Menu Up/Down Buttons
• G: Back Button
• H: Slider for IC3/IC5 Charge Port
• I: Menu Select Button
• J: Balance Port
• K: IC5 Battery Charge Port
• L: IC3 Battery Charge Port

Operating the Charger

Before operating the charger, read your battery's specifications and all battery-specific safety instructions.

1. Connect the supplied AC power cable to the charger and the corresponding power adapter to turn on your S1400 Smart Charger. Turn on the charger using the On/Off switch on the back of the charger. The charger will power on and display the start screen after the charger is set to “ON”.
2. Connect the battery to the port on the front of the charger.
3. Connect the battery balance lead, if applicable, to the balance port located to the right of the IC3 and IC5 ports. Ensure the balance lead is positioned correctly to the left side of the balance port.
4. Smart Batteries: When charging a Spektrum Smart Battery, the battery cell count, battery type, battery charge current, and battery capacity are automatically configured, and the charger will automatically begin charging when the battery and balance lead (if applicable) are connected to the charger. G1 Spektrum Smart Batteries are compatible with G2 Spektrum Smart Chargers.
5. Press and release the Menu button to display the list of charger settings:
   • Task [Function]: Select Charge, Discharge, or Storage.
   • Battery (Type) [Battery (Type)]: Select the correct battery chemistry.
   • Cells [Cells] (Cell Count) [(Cell Count)]: Set the number of cells in the battery (this value is automatically set when using a Spektrum™ Smart Battery or when the balance lead is connected to the balance port).
   • Current [Current]: Set the charging current.
   • Start: Initiate the charging cycle.
   • Smart Battery Settings [Smart Battery Settings]: Configure the Smart Battery settings.
   • System Settings [System Settings]: Configure charger settings.
   • Charger History [Battery History]: Displays the number of charge cycles per day, total cycles, charger temperature, and input power.
   Select the desired Task [Function].
6. Ensure the settings for the battery being charged are correct.WARNING: Always check the charging parameters before beginning the charging process. Charging a battery with incorrect settings, including charging a battery in the wrong mode, can result in property damage and fires.
7. Scroll to the Start menu item.
8. Press and release the Menu button to begin the charging process.

During Charging:

1. While the battery is charging, the main screen displays:
   • Charge status in percent
   • Battery data
   • Charge current
   • Charged capacity
   • Remaining charge time (Smart Batteries only)
   • Total charge time
2. Scroll to the next screen to view additional cell voltage information.
3. Scroll to the last screen to view the battery's internal resistance.
4. When the fast charge cycle is complete, the charger will beep once, and the battery bar will turn green. The charger balances the battery cells.

To Stop Charging:

1. During charging, press the Back button or hold the Menu button.
2. Select the Stop menu item. The charger will abort the charging process. The Ready screen will appear.WARNING: Always interrupt the charging cycle or the charger's power supply if irregularities occur during charging (e.g., a swollen battery).

When Charging is Complete:

The charger will emit a tone to indicate that fast charging is complete. Once the charger has balanced the battery cells, two double tones will sound.

1. The main screen will display a green bar at the top to indicate that the battery is fully charged and the charging process is complete.
2. The total charged capacity and total charge time will be displayed.
3. Disconnect the battery from the charger. The battery is ready, and the start screen will reappear on the charger.

Screen Symbols

The charger uses various symbols to indicate different functions and statuses:

• Battery icon: Charge
• “ZA” icon: Current
• Play icon: Task
• Left/Right Arrows: Back/Forward
• “C” icon: Input Power
• Gear icon: Settings (Battery/System)
• Thermometer icon: Temperature
• Calendar icon: Date
• Battery with line: Internal Resistance
• Battery with graph: Battery History
• Circle with line: Mode
• Lightning bolt icon: Input Voltage
• Voltage icon: Output Voltage
• Storage icon: Storage Voltage
• Sun icon: Backlight
• Speaker icon: Volume
• Bell icon: Completion Tone
• Exclamation mark icon: Fault/Error Log
• Refresh icon: Cycles
• Question mark icon: No Battery Detected
• Info icon: Charger/Battery History
• Flask icon: Chemistry

Smart Settings

Smart settings are available when a Smart Battery is connected. These include:

• Auto Storage: Select to perform automatic storage charging with a delay between 12 and 240 hours.
• Charge Current: Adjust the standard charge current for the Smart Battery.
• Charge Voltage: Select the charge voltage for the Smart Battery.
• Storage Voltage: Select the storage voltage for each cell.
• Battery History: Provides the number of battery cycles, battery temperature, and production date.
• Fault Log: Provides a list of errors, including overvoltage, undervoltage, or overtemperature, and the date of the exception.
• Back: Return to the start screen.

System Settings

Configure various system preferences:

• Backlight: Low, Medium, High.
• Volume: Off, Low, Middle, High.
• Completion Tone: Single or Repeat.
• Touch Sensitivity: Low, High.
• Language: Select language.
• System Self-Checking: Initiates a self-test of the charger. Do not connect a battery to the output while the self-test is running.
• System Information: Displays the charger's firmware version.
• Back: Return to the start screen.

Charge Errors

If the charger displays an error, follow the on-screen instructions to resolve the error. If necessary, disconnect the battery from the output and balance ports, disconnect the power supply, and restart the charger.

*For more information about the charger, firmware updates, and optional accessories, visit the product page for the S1400 Smart Charger at www.horizonhobby.com.

Warranty and Service Information

Warning: A remote-controlled model is not a toy. If used incorrectly, it can cause significant injury to living beings and damage to property. Operate your RC model only in open areas and observe all instructions from the model's and the remote control's manuals.

Warranty Period: Exclusive Warranty Horizon Hobby LLC (Horizon) warrants that the purchased product is free from material and assembly defects. The warranty period corresponds to the legal provisions of the country in which the product was purchased. In Germany, the warranty period is 6 months and the warranty period is 18 months after the warranty period.

Warranty Limitations: (a) The warranty is granted only to the original purchaser (buyer) and is non-transferable. The buyer's claim consists of repair or replacement under this warranty. The warranty extends exclusively to products purchased from an authorized Horizon dealer. Sales to third parties are not covered by this warranty. Warranty claims are only accepted if valid proof of purchase is provided. Horizon reserves the right to change or modify these warranty terms without notice and revokes existing warranty terms.

(b) Horizon makes no warranty regarding the product's marketability, the consumer's abilities, and fitness for a particular use of the product. The buyer is solely responsible for verifying that the product meets their abilities and intended use.

(c) Buyer's Claims: It is at Horizon's sole discretion whether the product for which a warranty case has been identified will be repaired or replaced. These are the buyer's exclusive claims if a defect is identified. Horizon reserves the right to inspect all components used that may be involved in the warranty case. The decision for repair or replacement rests solely with Horizon. The warranty excludes cosmetic defects or defects caused by force majeure, improper handling of the product, incorrect use of the product, commercial use, or modifications of any kind. The warranty excludes damage resulting from incorrect installation, improper handling, accidents, operation, service, or repair attempts not performed by Horizon. Returns by the buyer directly to Horizon or one of its country representatives require written confirmation.

Damage Limitation: Horizon is not responsible for direct or indirect consequential damages, loss of income, or commercial losses related to the product, regardless of whether a claim is made in contract, warranty, or guarantee. Horizon will also not accept claims from a warranty case that exceed the individual value of the product. Horizon has no influence on the installation, use, or maintenance of the product or any product combinations chosen by the buyer. Horizon provides no warranty and accepts no claims for subsequent injuries or damages. By using and installing the product, the buyer accepts all listed warranty provisions without restrictions or reservations. If you, as the buyer, are not willing to accept these provisions in connection with the use of the product, you are asked to return the product in unused condition in its original packaging completely to the seller.

Safety Instructions: This is a high-quality hobby product and not a toy. It must be used with caution and care and requires some mechanical and mental abilities. Failure to operate the product safely and carefully can lead to injuries to living beings and significant property damage. This product is not intended for use by children without the supervision of a guardian. The manual contains safety instructions and regulations as well as tips for maintenance and operation of the product. It is essential to read and understand these instructions before initial use. Only in this way can incorrect handling be prevented and accidents with injuries and damage be avoided.

Questions, Help, and Repairs: Your local specialist dealer and sales point cannot carry out a warranty assessment without consulting Horizon. This also applies to warranty repairs. Therefore, in such cases, contact the dealer who will consult with Horizon to make an appropriate decision that helps you as quickly as possible.

Maintenance and Repair: If your product needs to be serviced or repaired, contact either your specialist dealer or Horizon directly. Returns/repairs are only processed with an RMA number issued by Horizon. You or your specialist dealer will receive this number from technical service. More information can be found in the service portal at www.Horizonhobby.de or by calling Horizon's technical service. Pack the product carefully. Note that the original packaging is usually not sufficient to prevent damage during shipping. Use a shipping service with a tracking function and insurance, as Horizon assumes no responsibility for the shipment of the product until acceptance. Please include proof of purchase with the product, as well as a detailed description of the fault and a list of all individual components sent. We also require your complete address, a phone number for inquiries, and an email address.

Warranty and Repairs: Warranty inquiries will only be processed if an original proof of purchase from an authorized dealer is enclosed, showing the buyer and the date of purchase. If a warranty case is confirmed, the product will be repaired or replaced. This decision rests solely with Horizon Hobby.

Paid Repairs: For paid repairs, we will provide a cost estimate, which we will forward to your dealer. The repair will only be carried out once we receive authorization from the dealer. The repair cost is to be paid to your dealer. For paid repairs, a minimum of 30 minutes of workshop time and return shipping costs will be charged. If we do not receive confirmation for repair within 90 days, we reserve the right to destroy or otherwise dispose of the product.

CAUTION: We only perform paid repairs for electronics and motors. Mechanical repairs, especially for helicopters and RC cars, are extremely complex and must therefore be carried out by the buyer themselves.

Contact Information for Warranty and Service

Legal Information for the European Union

CE

EU Declaration of Conformity

S1400 G2 AC Smart Charger (SPMXC2040); Horizon Hobby, LLC hereby declares that the device complies with the following directives: EU Directive on Electromagnetic Compatibility 2014/30/EU: EU EMC Directive 2014/30/EU.

The full text of the EU Declaration of Conformity is available at the following internet address: http://www.horizonhobby.com/content/support-render compliance.

Official EU Manufacturer
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822 USA

Official EU Importer:
Horizon Hobby, GmbH
Hanskampring 9
22885 Barsbüttel Germany

WEEE NOTICE: This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

© 2020 Horizon Hobby, LLC.

IC3, IC5, EC3, EC5, the Smart Technology logo and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. CN201721563463.4. Other patents pending. Created 08/20 SPMXC2040 64408