Terra Screen Protector
User Manual for iPhone 16 Series
Product Information
At a Glance
The Terra Screen Protector package includes:
- Applicator Box
- Non-slip Sponge Pad
- Reusable Alignment Tray
- Alignment Hooks
- Pull Tab
- Alignment Film
- Screen Protector (x2)
- Spatula
- Cleaning kit: Microfiber Cloth, Cleaning Wipe (x2), Dust Removal Stickers (x2)
Device Compatibility
The Terra Screen Protector is compatible with all iPhone 16 series models: iPhone 16, iPhone 16 Plus, iPhone 16 Pro, and iPhone 16 Pro Max.
Visual: Three iPhone models are depicted side-by-side, illustrating compatibility with different sizes.
Product Specifications
Applicator Box Specifications
| Item | Specification |
|---|---|
| 16 | 4.3 in (L) x 1 in (W) x 7.4 in (H) Weight: .37 lbs |
| 16 Plus | 4.4 in (L) x 1 in (W) x 8 in (H) Weight: .38 lbs |
| 16 Pro | 4.3 in (L) x 1 in (W) x 7.4 in (H) Weight: .37 lbs |
| 16 Pro Max | 4.4 in (L) x 1 in (W) x 8 in (H) Weight: .38 lbs |
Screen Protector Specifications
| Item | Specification |
|---|---|
| 16 | 2.66 in (L) x 0.025 in (W) x 5.63 in (H) Weight: 0.55 oz |
| 16 Plus | 2.89 in (L) x 0.028 in (W) x 6.17 in (H) Weight: 0.65 oz |
| 16 Pro | 2.64 in (L) x 0.025 in (W) x 5.72 in (H) Weight: 0.57 oz |
| 16 Pro Max | 2.90 in (L) x 0.028 in (W) x 6.25 in (H) Weight: 0.68 oz |
Installation
Attaching Your Screen Protector
❗ All items needed to complete this process can be found underneath the alignment tray inside the box.
❗ Please take off any case on your phone prior to starting.
Step 1: Clean Screen
Clean screen with provided wet wipe. Then dry with cleaning cloth and remove dust using sticker.
Visual: Illustration showing a hand cleaning a phone screen with a wipe and a dust removal sticker.
Step 2: Position Phone
Place the phone in the alignment tray with the screen facing up.
*Note: The top of your phone should be closest to the box hanger.
Visual: Illustration showing a phone being placed into an alignment tray.
Step 3: Place Screen Protector
Place the screen protector against the alignment tray. Attach the four hooks of the tray to the holes of the screen protector.
Visual: Illustration showing the screen protector being aligned and attached to the tray hooks.
Step 4: Close and Lock Box
Close the lid of the box and lock the cover in place.
Visual: Illustration showing the box lid being closed.
Step 5: Pull Tab
Keep your hands on the side of the box and pull the screen protector tab out.
Visual: Illustration showing the tab being pulled, with a red cross indicating where not to press.
❗ Avoid holding the center of the box while pulling.
Step 6: Settle Time
Wait a minimum of 10 seconds for tempered glass to settle on screen.
Visual: Illustration showing the screen protector on the phone with a timer icon indicating 10s.
Wait time: 10s
Step 7: Remove Top Layer
Open box and peel away top layer of screen protector.
Visual: Illustration showing the top layer of the screen protector being peeled off.
Step 8: Final Settling
Wait a few minutes for the screen protector to settle. Press along the phone edge to secure the screen protector in place.
Visual: Illustration showing a finger pressing along the edge of the phone screen.
Reusing Your Applicator
Step 1: Save Applicator
Keep your alignment tray and the box applicator and re-use when applying additional Terra Screen Protector.
Visual: Illustration showing the alignment tray and applicator components.
Step 2: Follow Instructions
Follow the provided installation instructions with each application.
