Velox™ Mini Qi2 Wireless Air Vent Mount
User Manual
Introduction
For optimal mounting and charging, please follow the detailed instructions within this manual when using the Velox Mini Qi2 Wireless Air Vent Mount.
01 Product Information
At a Glance
Diagram showing the Velox Mini Qi2 Wireless Air Vent Mount. It includes labels for: Vents, Vent Clip, Rotating Ball Joint, Magnetic Mounting Head. Also shown is a 20W Power Adapter with a USB-C Power Cable.
Device Compatibility
Designed for use with Qi2-enabled smartphones including MagSafe iPhone series 13 and later.
Illustration showing three iPhone models of varying sizes, representing compatibility with MagSafe and Qi2-enabled devices.
Product Specifications
| Item | Specification |
|---|---|
| Total Input | DC 5V/3A DC 9V-2.22A DC 12V-1.67A |
| Wireless Charger Output | 5W/7.5W/15W |
| Cable Length | 5' |
| Mount Length | 2.36" |
| Mount Width | 2.3" |
| Mount Height | 2.3" |
| Mount Weight | 5 oz. |
Power Adapter Specifications
| Input | Output |
|---|---|
| DC 12V ~ 24V | DC 5V ~ 3A DC 9V ~ 2A DC 12V ~ 1.5A |
*iOttie is not liable for possible damages due to product misuse.
02 Installation
Attaching the Mount
Push the Velox Mini Qi2 onto the blade of your vehicle's air vent. The silicon texture of the prongs will ensure that the mount does not fall off even when driving on rough roads.
Diagram illustrating how to attach the mount to a vehicle's air vent blade. The mount's prongs are shown inserting into the vent.
Note: Mount is designed to be used only with FLAT air vent blades.
Visual representation of various air vent types, with checkmarks (✔️) on flat types and crosses (❌) on curved or other incompatible types.
Connecting to Power
Connect the USB-C cable to your vehicle's USB-C port or auxiliary power outlet via the included 20W adapter.
Diagram showing the USB-C cable plugged into the 20W adapter, which is then plugged into a vehicle's power outlet (cigarette lighter socket).
Note: The Velox Mini Qi2 does not have an On/Off switch. Once the cable is plugged in and the vehicle is turned on, the mount will stay on.
Mounting Your Phone
Tap your phone against the mount and the magnets will hold it in place. Charging will start automatically. You are now ready to start driving.
Operation Warnings & Compliance
FCC Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operating temperature: -10-55°C
Operating frequency range: 2402-2480MHz
Rated Power: For Classic: 9.1dBm, BLE: 8.1dBm
Declaration of Conformity (EU)
Hereby, iOttie, Inc. declares that the radio equipment type Velox™ Magnetic Wireless Charger Mini Air Vent Mount is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.iottie.com/wp-content/uploads/2025/02/doc_vlxwcg212_213.pdf
This device may be used in each EU member state.
Important Safety Information
This manual contains important safety and operating instructions for the Velox™ Magnetic Wireless Charger Mini Air Vent Mount.
Please read all instructions and safety information before using this product. If damage occurs as a result of failure to follow the instructions, the warranty will be voided.
- Do not expose to rain, moisture, or snow.
- Using an attachment made or sold by anyone other than the manufacturer is not recommended, doing so may result in an increased risk of fire, electric shock, or injury.
- Do not operate this magnetic wireless charging mount if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
- Do not disassemble this magnetic wireless charging mount; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in electric shock or fire.
- To reduce the risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off the vehicle controls will not reduce this risk.
- Avoid extended exposure to direct sunlight, which may damage the device.
- Exposing this product to open flames may cause it to explode.
- Do not expose this product to strong magnetic fields.
- Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.
*Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving.
Product Disposal & Recycling
This product complies with the radio interference requirements of the European Community.
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
The product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop you bought this product.
Legal & Trademarks
Designed in New York City. 470 7th Ave, New York, NY 10018. Made in China. U.S. Patent Pending ©2023 iOttie. All rights reserved. iOttie and Velox are registered trademarks owned by iOttie, Inc. John 3:16
Apple, the Apple logo, iPhone, iPod, iPod touch, Mac, macOS, Magsafe and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.
Hereby, iOttie declares that the radio equipment type VLXWCG212 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following web address: https://www.iottie.com/wp-content/uploads/2025/02/doc_vlxwcg212_213.pdf
Hiermit erklärt iOttie, dass der Funkanlagentyp VLXWCG212 der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://www.iottie.com/wp-content/uploads/2025/02/doc_vlxwcg212_213.pdf
Warranty
The Velox Mini Wireless Air Vent Mount is backed by a 2 year warranty.
