Introduction
Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/Hygrometer. This device allows users to remotely monitor the temperature and humidity of their living room, bedroom, greenhouse, and other spaces directly from a smartphone.
Features
The ThermoPro TP351 features a compact design suitable for tabletop placement or magnet-mounting. The device itself displays current humidity and temperature, along with maximum and minimum readings recorded. It is powered by two AAA batteries.
Visual description: The product is depicted as three compact, square-shaped devices with rounded corners, each featuring a display screen and the "ThermoPro" logo. They are shown in a light color, suggesting a clean, modern aesthetic, and appear suitable for placement on a surface or attachment via magnet.
- Display: Shows current humidity and temperature, as well as maximum and minimum humidity/temperature recorded in the past.
- Battery Compartment: Holds two AAA batteries to power the unit.
- Design: Totally wireless tabletop and magnet-mountable.
Before First Use
- Insert or Replace Battery: Insert two AAA batteries into the battery compartment, ensuring correct polarity (+) and (-) as indicated.
- Do not immerse product body in water.
- The humidity and temperature monitor is now ready to use.
Care of Your Humidity/Temperature Monitor
- Avoid exposing the device to extreme high or low temperatures, as this can damage electronic parts and plastics.
- Remove batteries if the device is stored for more than four months.
Specifications
- Temperature range: -58 °F ~ 158°F (-50 °C ~ 70 °C).
- Humidity range: 10% ~ 99%.
- Refresh rate: 10 seconds.
- Power supply: 2 X AAA 3.0V.
Setup Instructions
Follow these simple steps to set up the ThermoPro Bluetooth Thermometer/Hygrometer and remotely monitor temperature and humidity from a smartphone.
Step 1: Download and Install the “ThermoPro Sensor" App.
Search for "ThermoPro Sensor" on the Apple App Store for iOS devices or on the Google Play Store for Android devices. Download and install the app on a smartphone.
- iPhone and iPad apps require iOS 9.0 or above.
- Android app requires versions 4.4 or above.
- Android users must allow all requested permissions for the app from the Android system.
Step 2: Enable Bluetooth on Your Smartphone.
Navigate to the smartphone's Settings section and enable Bluetooth. If Bluetooth is already enabled, this step can be skipped.
Step 3: Insert Batteries.
Insert two AAA batteries into the battery compartment on the back of the thermometer, observing correct polarity (+) and (-).
Step 4: Observe Display and Bluetooth Icon.
The temperature and humidity will be displayed on the screen. The Bluetooth icon (Ⓑ) will flash at the top of the display for 2 minutes, indicating the thermometer is ready for pairing with a mobile phone.
Step 5: Launch App and Pair.
Launch the ThermoPro Sensor APP and press the plus symbol (⊕) to add a thermometer. The available thermometers will be shown in a list; select one to pair. Once pairing is complete, the Bluetooth icon (Ⓑ) on the thermometer display will stop flashing, and the current temperature and humidity will appear on the APP. If the Bluetooth icon (Ⓑ) stops flashing and pairing is not yet finished, press and hold the power symbol (⏻) button for 2 seconds, and the Bluetooth icon (Ⓑ) will flash again, ready for pairing.
The ThermoPro Bluetooth Thermometer is now ready for use!
For any questions or further setup assistance, please contact ThermoPro customer service.
Declaration of Conformity
The manufacturer declares that this product complies with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU and the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://itronicsmall.com/eu-declaration-of-conformity/
Disposal of the Electronic Appliance
This electronic appliance should not be disposed of with normal household waste. Dispose of the unit at an approved facility or a local recycling center. Observe current rules and regulations when disposing of the appliance. Contact the local council if in doubt.
Visual description: A crossed-out wheeled bin symbol (⎕) indicates that the product should not be disposed of with general waste.
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for a period of one year from the date of purchase.
Should any repairs or servicing be required under this warranty, contact ThermoPro Customer Service by phone or email for instructions on how to pack and ship the product.
This warranty provides specific legal rights, and other rights may vary by state.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Note 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
