Zebronics ZEB-FIT380CH Smart Watch User Manual

Introduction

Dear Customer,

Thank you for purchasing the ZEB-FIT380CH Smart Watch. Please read this user manual carefully before operation and save it for future reference.

Disclaimer

This product is intended for general wellness and fitness tracking. It may monitor SpO2 and heart rate, but it should not be used for medical purposes.

Features

• Heart Rate Monitor
• Pedometer
• Color Display
• Customizable Watch Face
• Calling Function (Via BT)
• Call and SMS Notification
• Third Party App Message Notification
• Wrist Sense
• 6 Sports Modes
• Weather Forecast
• Alarm Clock
• Stop Watch
• IP67 Water Proof
• SpO2 Monitoring
• Call Reject
• Multi Menu UI
• Calculator
• Quick Access Menu

Specifications

*Note: Your device must support Android v5.0/iOS v10.0 (or above) and BT version 4.0 (or above).

Package Contents

• Smart Watch: 1 Unit
• Charging Cable: 1 Unit
• QR Code Guide: 1 Unit

Product Representation

The rear view of the Zebronics ZEB-FIT380CH smart watch is depicted. It shows the sensor area and charging pins used for connecting to the charger.

Charging Process

Use a 5V DC power adapter to charge the ZEB-FIT380CH smart watch with the charging cable provided inside the package. Kindly ensure to charge the device fully before using it for the first time. The smart watch powers ON once plugged to the charger or it can be manually powered ON by pressing the button for a few seconds.

Power-on

Press and hold the power button to turn the smart watch ON/OFF.

Usage Instructions

1. Installing App

   Download the app by scanning the QR code provided or by searching for the app "SZOS" in the Google Play Store / iOS App Store. Once installed, follow the steps directed by the app interface to provide necessary permissions.

2. Connecting ZEB-FIT380CH Smart Watch to the SZOS App

   1. Click on the 'DEVICES' option at the bottom of the navigation bar in the SZOS app home page.
   2. In the Devices page, choose the 'Scan' option. The camera will open, allowing you to scan the QR code provided in the watch UI.
   3. Open the menu by swiping Left->Right on the watch main page. Select the QR code option from the Quick access menu. A 'Scan to connect' QR code will appear on the watch screen.
   4. Scan this QR code with the SZOS app interface to proceed.
   5. Once scanned, the watch will automatically pair with the SZOS app.

3. Call Function (via BT) - Connection and Usage

   1. Android smartphones will display a BT pairing request for the smart watch's secondary BT. Allow this connection request to start using the call function (via BT).
   2. For iOS smart phones, once the app connection is successful, navigate to the mobile BT settings and pair with the 'ZEBFIT380CH_***' watch secondary BT. This connection enables the call function via BT.

4. Display and Interface of ZEB-FIT380CH Smart Watch

   Once the device is powered ON and connected to the smartphone, the display interface images shown on the ZEB-FIT380CH smart watch will be visible.

5. Activating the Voice Assistant

   Once the watch BT connection is established, you can enter the 'Voice assistant' option in the watch interface to wake up your smartphone's voice assistant.

6. Disconnecting Process

   Kindly ensure the watch is disconnected from your smartphone's BT menu to completely disconnect the watch and the smartphone.

Important Notes

Do not use the smart watch in water with temperatures above 42°C. For any repairs, please take the smart watch to an authorized service center.

Service Center Information: https://zebronics.com/pages/service-centres