ViewSonic VX2759-4K-PRO Quick Start Guide
ViewSonic
Introduction
This guide provides essential information for setting up and using your ViewSonic VX2759-4K-PRO monitor. It covers assembly, connections, and important safety and compliance details.
What's Included
Ensure all the following items are present in the box:
- ViewSonic VX2759-4K-PRO Monitor
- Monitor Stand (Neck and Base)
- Power Cable
- HDMI Cable
- DisplayPort Cable
- USB-A to USB-B Cable (for USB hub functionality)
- Quick Start Guide
- Warranty Card
Assembling the Monitor
Follow these steps to assemble the monitor stand:
- Attach the monitor stand neck to the VESA mounting area on the back of the monitor.
- Connect the monitor stand base to the neck.
- Secure the stand assembly using the provided screws or locking mechanism.
- Carefully place the assembled monitor on a stable, flat surface.
[Diagram Description: The diagrams show the process of attaching the stand neck to the monitor, then attaching the stand base to the neck, and finally securing the assembly. The monitor is then shown placed upright.]
Connecting Your Monitor
Connect your monitor to your computer and power source:
Rear Ports
- Power Connector: For connecting the power cable.
- HDMI Port(s): For connecting to video sources via HDMI cable.
- DisplayPort: For connecting to video sources via DisplayPort cable.
- USB-A to USB-B Port: Connect the USB-B end to the monitor and the USB-A end to your computer to enable the monitor's USB hub functionality (if applicable).
Connecting Cables
1. Connect one end of the HDMI or DisplayPort cable to the monitor and the other end to your computer's corresponding video output port.
2. Connect the USB-A to USB-B cable between the monitor and your computer if you wish to use the monitor's USB ports.
3. Connect the power cable to the monitor and then plug it into a suitable power outlet.
[Diagram Description: The connection diagram shows cables being plugged into the rear ports of the monitor: power, HDMI, DisplayPort, and USB. It also shows the monitor being connected to a computer and a power source.]
Important Information
[Information Icon] Please read all safety instructions before operating the monitor. Ensure proper ventilation around the monitor and avoid placing it near heat sources or in direct sunlight.
Electronic Product Pollution Control Information
This section provides information on the presence of hazardous substances in electronic products, in accordance with Chinese standards (GB/T 26572-2011). The table below indicates whether specific hazardous substances are present in the product's components.
| Hazardous Substance / Element | Component Name | Printed Circuit Board Assembly | Display Screen | Housing | Power Adapter | Power Cord | Manual & Packaging |
|---|---|---|---|---|---|---|---|
| Lead (Pb) | O | O | O | O | O | O | |
| Mercury (Hg) | X | X | X | X | X | X | |
| Cadmium (Cd) | X | X | X | X | X | X | |
| Hexavalent Chromium (Cr VI) | X | X | X | X | X | X | |
| Polybrominated Biphenyls (PBBs) | X | X | X | X | X | X | |
| Polybrominated Diphenyl Ethers (PBDEs) | X | X | X | X | X | X |
Note: 'O' indicates that the concentration of the hazardous substance in all homogeneous materials in the component is below the limit requirement of GB/T 26572-2011. 'X' indicates that the concentration of the hazardous substance in at least one of the homogeneous materials in the component is above the limit requirement of GB/T 26572-2011. This does not mean the entire product is environmentally hazardous.
Further Information and Resources
- For full product specifications, support, and downloads, visit the official ViewSonic website: www.viewsonic.com
- Register your ViewSonic product for warranty and support: www.viewsonic.com/register/vx2759-4k-pro
- Learn about ViewSonic's environmental and recycling programs: www.viewsonic.com/global/geo/recycle-programs
