FOR MODEL KS 5500iES ATSR

Commissioning of an Inverter Generator

1. Please read the operating manual carefully before getting started.
2. Connect the terminals to the battery: "+" to "+" (red), "-" to "-" (black).
3. Fill the engine with motor oil for engines SAE 10W-30 or SAE 10W-40.
4. Check oil level.
5. Fill the fuel tank to the fuel filter level.
6. Turn the fuel valve handle to the “ON” position (OPEN).

Starting Procedures

1. For manual start: Press MAIN POWER button to "ON" position. Pull the handle of the manual starter until a slight resistance is felt, then pull it relatively sharply. Slowly return the manual starter handle by hand; do not release it abruptly.
2. For electric start: Press MAIN POWER button to "ON" position, then press the ELECTRIC START button.
3. If the generator does not start after several attempts, please contact our customer support on the website: ks-power.de/en.