String Lights User Manual

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF exposure compliance statement: This device has been evaluated to meet the general RF exposure requirement.

Technical Parameters

Product name	string lights (Bluetooth)
Support system	Android 4.4 and above / iOS 11.0 and above
Connection mode	Bluetooth 4.0
Input voltage	DC5V/12V/24V

Download App Software

Please search for "LED LAMP" in major App Stores, or scan the QR code provided in the manual.

Download the "LED LAMP" APP onto your mobile phone by scanning the QR code in the user manual or by searching for the "LED LAMP" APP in the iPhone App Store or Google Play Store.
After the APP has downloaded successfully, turn on the Bluetooth function on your phone. Then, plug in the strip light and open the APP. Your APP will pair with the strip light automatically, allowing you to control it.
Ensure the Bluetooth function of your mobile phone is turned on.
For Android phone users, also turn on the location function and allow necessary permissions.

Instructions

On the home page, manually pull down to refresh. The APP will automatically search for nearby devices. Click the "LED DMX 05-XXXX" device to enter the lighting control interface.

1. Settings

In the Settings menu, you can configure:

RGB sorting
Timing
Shaking effect
Changing skins

Adjustment sort: Set pixels for custom effects.

2. RGB

The RGB section allows control over three main areas:

Color ring: Select colors using a visual color wheel.
Channel: Adjust individual color channels (R, G, B).
Monochrome: Set a single solid color.

Features include:

On/Off toggle
Color selection
Color wheel switch
Custom color presets

3. Mode

Select your desired lighting mode. You can choose from pre-set modes, custom modes, and adjust the speed and brightness of the effects.

Play/Pause: Control the playback of dynamic modes.

Cycle: Cycle through different modes or color sequences.

Mode selection: Browse and select from various lighting patterns.

Mode switch: Transition between different modes.

4. Custom

Create and save your own lighting effects. You can customize the color, select a mode, and adjust the speed and brightness to your preference.

5. Music

This section offers two modes:

Voice Control Mode: Hundreds of modes react to sound.
Music Mode: Requires music to be played from your mobile phone to sync with the lights.