Tip
Thank you for choosing our wireless APP series lamps. We assure you that every product has undergone strict quality testing before sale to ensure that it is in the best working condition. After you receive the product, please carefully open the box to check all the contents to ensure that the product and spare parts are complete and in good condition during transportation. If damaged or missing during transportation, please contact us promptly.
Precautions for Safe Use
- This fixture should be kept dry and should not be stored in a humid environment.
- Intermittent use will effectively extend the life of the lamp.
- Do not use organic solvents to wipe the lamp to avoid damage.
- Do not work in an environment where the temperature exceeds 45°C.
- When removing the product, please dispose of the bag and box properly and do not allow children to play with it.
- Do not allow the power cord to come into contact with high temperature or sharp objects, and do not pull the power cord to unplug the power cord.
- Do not use it under high temperature, high dust and corrosive gases, flammable gases, rainwater and other environments.
⚠️ CAUTION: DO NOT OPEN THE HOUSING - SHOCK HAZARD
Technical Parameters
| Voltage | AC100V-240V 50/60HZ |
| Light Source | 6PCS*18W (RGBAW+UV) LEDs |
| Strobe Frequency | 1-25Hz |
| Light Angle | 25° |
| LED Average Life | 50000H |
| Battery Capacity | 8800mA |
| Charging Time | 6-8H |
| Endurance Time | Full brightness about 3 hours, self-propelled about 6 hours, single color about 12 hours or so. |
| Remote Control Protocol | Infrared remote control |
| Effective Control Distance | 10 meters |
| Control Application Name | LED LAMP |
| APP Connection Protocol | 2.4G |
| APP Effective Control Distance | 40M |
| Control Mode | Lamp key controller, LED LAMP APP control, DMX controller control, remote control. |
| Operation Mode | Self-propelled, Sound Control, Master-Slave, DMX |
| Channel | 6CH/10CH |
| DMX Control Protocol | Standard DMX512 protocol / RDM protocol to support the remote dialing code. |
| Data Connection | Three core XLR input/output |
| Display | LCD liquid crystal screen display |
| Protection Grade | IP20 |
| Working Environment | -20°C-40°C |
| Material | Aluminum |
LCD Display Screen
The device features an LCD screen displaying status information. The screen typically shows:
- Current mode (e.g., DMX512, Shows, Sound)
- Settings like temperature (e.g., 28°C), brightness (e.g., 65%)
- Navigation buttons: MENU, DOWN, UP, ENTER
(Visual description of the screen layout with icons for Color, Set, Help)
DMX Channel Configuration
| Channel | 6CH | 10CH |
|---|---|---|
| CH1 | 1-255 Red Dimmer | 1-255 Total Dimmer |
| CH2 | 1-255 Green Dimmer | 1-255 Red Dimmer |
| CH3 | 1-255 Blue Dimmer | 1-255 Green Dimmer |
| CH4 | 1-255 White Dimmer | 1-255 Blue Dimmer |
| CH5 | 1-255 Yellow Dimmer | 1-255 White Dimmer |
| CH6 | 1-255 Purple Dimmer | 1-255 Yellow Dimmer |
| CH7 | 1-255 Purple Dimmer | |
| CH8 | 1-255 Strobe | |
| CH9 | 0-8 Shut light | 0-8 Shut light 9-50 Static color mixing modes (32 types) 51-100 Jump Mode 101-150 Mutagenesis Mode 151-200 Gradientient Mode 201-220 Sound Mode1 221-240 Sound Mode 2 241-255 Sound Mode 3 |
| CH10 | 1-255 Speed & Color Selection (9CH&10CH) |
Remote Control Button Functions
The infrared remote control offers the following functions:
- Dimmer Up / Dimmer Down
- OFF/ON
- Color selection: R, G, B, W, A, UV buttons for specific colors.
- Static Color mixing (AC 1 to AC 9)
- Multiple color mixing modes (0)
- Adjust 32 static color mixing modes using Up and Down buttons.
- AUTO: Color changing mode, adjust speed with Up and Down keys.
- STROBE: Color selection strobe mode (optional 32 kinds), adjust speed with Up and Down keys.
- FADE: Fade mode, adjust speed with Up and Down keys.
- SOUND: Sound-activated mode, adjust sensitivity with Up and Down keys.
(Visual description of the remote control layout with buttons)
APP Control Connection Steps
To control the light using the mobile application:
- Scan the QR code provided on the cover or in the "Help" section to download the exclusive LED LAMP app.
- Ensure Bluetooth and WLAN on your phone are turned on.
- Find the device in your phone's WLAN list.
- Open the installed LED LAMP app.
- Click on the link corresponding to the device (e.g., LED-***).
- Click "Add" in the upper right corner.
- Select the specific module, typically labeled "Stage--LED LIGHT".
Control is only available after successful connection. The LED LIGHT will be displayed on the home page and can be used directly.
Other Remarks
- Image Refresh Frequency: Press and hold the MENU key in the A001 address display interface to adjust the image refresh frequency (1200KHZ/4000KHZ/12KHZ/20KHZ).
- Brightness Adjustment: Press and hold the ENTER key in the A001 address display interface to lower the brightness color mixing value (0-20).
- Battery Charging: During battery charging, the charging interface will appear on the display. To use the fixture while charging, press the MENU button frequently under the charging interface to enter the main operation interface.
- Temperature Protection: When the temperature reaches 75°C, the program will automatically reduce power to 30%. When the temperature reaches 95°C, the program will automatically extinguish the light.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
To satisfy FCC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.
