FiiO BTR7 Bluetooth Headphone Amplifier

Buttons and Ports Labeled

The device is depicted with its front and back views. The front shows a display screen and a USB Type-C port at the bottom. The top edge has two headphone outputs labeled '4.4mm BAL headphone out' and '3.5mm headphone out'. The right side panel features four buttons labeled A, B, C, and D, along with a microphone opening and a charging switch.

4.4mm BAL headphone out
3.5mm headphone out
Display ?️
Microphone ?
Button A: Power on/off, Activate menu, Exit menu, Return to previous menu step by step.
Button B: Reconnect/Play/Pause/Answer/Hang up/Cancel a call/Force a pairing, Activate voice assistant, Confirm menu.
Button C: Vol. up/Previous track, Switch submenus.
Button D: Vol down/Next track, Switch submenus.
Charging switch ?
USB Type-C charging/decoding port

Operation Explained

Power Management

Power on: Hold button A for about 3 seconds while the device is off.
Power off: Hold button A for about 5 seconds while the device is on.
Turn off/on the display: While the device powers on (not on the menu page), short press button A.
Activate menu: While the device powers on and not on the menu page, hold button A for about 2 seconds.
Exit menu: Hold button A for about 2 seconds on the menu page.
Return to the previous menu step by step: On the menu page, short press button A.
Confirm menu: Short press button B on the menu page.
Switch submenus: Short press button C/D on the menu page.

Pairing and Bluetooth Operations

Enter pairing mode (not on the menu page):
1. Power on for the first time: After the device powers on, it will automatically enter the pairing mode with the display showing 'Pairing…'.
2. Force the device to enter pairing mode: After the device was successfully connected, hold button B for about 5 seconds and then the display will show 'Pairing…'.
Operation instructions after a successful pairing (not on the menu page):
- Activate Siri/voice assistant: Double press button B.
- Play/Pause/Answer/Hang up/Cancel a phone call: short press button B.
- Reject a phone call: Hold button B for about 2 seconds when there is an incoming phone call.
- Volume up/down: Short press button C/D.
- Switch tracks: Hold button C/D for about 2 seconds.
- Clear pairing: Hold button C and D at the same time for about 5 seconds when the device is on.
How to connect the BTR7 to two Bluetooth devices simultaneously: After a successful pairing with device 1, hold button B for about 5 seconds to enter the pairing mode again. Search for "BTR7" on device 2 and pair it with the BTR7. Back to device 1, select "FiiO BTR7" in the Bluetooth device list and reconnect them. You could also restart the BTR7 after a successful pairing with device 2, so the BTR7 can be connected to two Bluetooth devices simultaneously.
Reset: Short press button A and D at the same time at any state.
The BTR7 supports a simultaneous connection to at most two devices.

Connect to Computer to Enjoy Music

When using UAC 2.0 for Windows computers, please go to FiiO's official website to download and install the USB DAC driver.
For MAC computers, there is no need to install the driver, but it requires selecting the BTR7 as the default device for audio output.
FiiO Support website: https://www.fiio.com/Driver_Download
When using UAC 1.0, no driver is required. Just select the BTR7 as the default audio output device after connecting it to the computer.
It is recommended to adjust the volume of the computer to the max level, and control the output volume on the BTR7.

Notes:

★ You'll need to unplug and plug the BTR7 after switching the UAC mode between 1.0 and 2.0.
★ When working as a USB DAC under 2.0 mode, the BTR7 supports MQA Renderer, which will show "MQA" on the display. It requires working with music applications that support MQA Core Decoder.
USB DAC, the playback of USB DAC will default to be prior to that of Bluetooth. You can also switch to Bluetooth first in the FiiO Music APP for your preference.
★ When connecting through Bluetooth or USB DAC, the BTR7 supports 60 levels of volume adjustment.

Charging Function

★ The BTR7 can be charged through the USB port or a wireless charger.
★ The charging function can be enabled/disabled through the slide switch.

Notes and Precautions

★ It's recommended to charge the device with a standard 5V charger.
★ Please do not place the device in circumstances of excessive high/low temperature (above 45°C or below 0°C).
★ Please keep the device away from liquids, so to avoid any damage to it.
★ If the device is to be left unused for a long time, please recharge it periodically to preserve its battery life.
★ Please adjust the volume to a suitable level before putting on earphones, so as to protect your hearing.
★ Please do not place the battery in high-temperature environments, and do not use the battery if it is soaked in water or if it is severely swollen. Please do not disassemble, hit, squeeze the battery or throw it into fire.

List of Items Included

BTR7
Leatherette case
Quick start guide
USB Type-C cable
USB Type-C to Type-C cable
Warranty card

To Learn More

★ For related instructions of the BTR7 and FAQ (Frequently Asked Questions), please scan the QR code below.
★ To learn more about the product, please visit our website: www.fiio.com

QR code for FAQ ?

QR code for FiiO website ?

Declarations and Specifications

Hereby, Guangzhou FiiO Electronics Technology Co., Ltd declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.fiio.com/doc

Function	Frequency	Maximum output power
Bluetooth	2402-2480MHz	7.1dBm

[CE marking]

WEEE Directive & Product Disposal

♻️ At the end of its serviceable life, this product should not be handed as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.

Internal/Supplied Batteries:

This symbol on the battery indicates that the battery is to be collected separately. This battery is designed for separate collection at an appropriate collection point.

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

Qualcomm aptX HD

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

	FiiO BTR7 Bluetooth Headphone Amplifier User Manual and Guide Comprehensive guide to the FiiO BTR7 Bluetooth Headphone Amplifier, covering button functions, operation, connectivity, charging, and important precautions. Learn how to use your FiiO BTR7 for an enhanced audio experience.
	FiiO K9 Desktop DAC and Amplifier Quick Start Guide Concise guide to setting up and using the FiiO K9 flagship desktop DAC and amplifier, covering connections, controls, and specifications for optimal audio performance.
	FiiO BTR3K Quick Start Guide: Bluetooth Headphone Amplifier Get started with your FiiO BTR3K portable high-fidelity Bluetooth amplifier. This guide covers setup, operations, indicator lights, and precautions for seamless audio experiences.
	FIIO KA11 Quick Start Guide: Portable DAC/Amp Get started with your FIIO KA11 portable DAC/Amp. This guide covers setup, features, usage, and important precautions for optimal audio performance.
	FiiO Q7 DAC and Headphone Amplifier User Guide Comprehensive user guide for the FiiO Q7 DAC and Headphone Amplifier, detailing setup, operation, features, troubleshooting, and compliance information.
	FiiO Q7 DAC and Headphone Amplifier: Quick Start Guide Learn how to set up and use your FiiO Q7 DAC and Headphone Amplifier. This guide covers power, charging, volume control, working modes (USB, Optical, Coaxial, Bluetooth), and important precautions.
	FIIO K15 Decoding Headphone Amplifier User Manual A comprehensive guide to the FIIO K15 decoding headphone amplifier, detailing its features, operation, connectivity options, audio modes, app control, PEQ settings, protection mechanisms, and firmware updates.
	FiiO K3 Quick Start Guide: Portable Headphone Amplifier & USB DAC Quick start guide for the FiiO K3, a portable headphone amplifier and USB DAC. Learn about its buttons, ports, operation, indicators, USB DAC modes, precautions, and package contents.