Be Quiet! Light Wings ARGB LED PWM BL079 Fan

Introduction

Thank you for deciding to purchase a be quiet! product. The following instructions will guide you through the installation process. If you do encounter installation problems, please don't hesitate to contact customer services by mailing service@bequiet.com. Please note that be quiet! cannot accept liability for damage caused by compatibility problems.

Warranty Information

be quiet! offers a 3-year manufacturer guarantee for consumers on its products, provided the original purchase was made from an authorized be quiet! dealer. Guarantee work requires a copy of the purchase receipt from an authorized dealer. Manipulation, structural changes, or damage caused by external mechanical force will void the guarantee. General Warranty Conditions apply and can be viewed on bequiet.com.

Manufacturer: Listan GmbH, Wilhelm-Bergner-Straße 11c, 21509 Glinde, Germany. For further information, please visit their website: www.bequiet.com.

Scope of Delivery

Note: Quantities may vary based on pack size (e.g., 1/3 for single pack).

Installation Instructions

Installation of Light Wings Single Pack

1. Step 1: Mount Fan

   Screw down the fan using the provided fan screws.

   [Diagram Description: A PC fan is shown being attached to a surface with screws.]

2. Step 2: Connect ARGB

   Combine the ARGB connector of the fan with the 5V ARGB connector of the motherboard. Ensure the system is switched off prior to installation.

   [Diagram Description: The ARGB connector from a PC fan is shown plugging into a motherboard's ARGB header.]

Installation of Light Wings Triple Pack

1. Step 1: Mount Fans

   Screw down the fans using the provided fan screws.

   [Diagram Description: Multiple PC fans are shown being attached to a surface with screws.]

2. Step 2: Connect ARGB Hub

   The ARGB Hub allows synchronization of up to six 5V ARGB devices via the motherboard. Switch off the system before installation. Connect the fan's ARGB connector to one of the six LED headers on the Hub.

   [Diagram Description: The ARGB Hub is shown with multiple fan connectors and a SATA power connector.]

3. Step 3: Connect Hub to Motherboard

   Use the ARGB cable to connect the RGB IN connector of the ARGB Hub with the 5V ARGB connector of the motherboard.

   [Diagram Description: An ARGB cable is shown connecting the ARGB Hub to a motherboard's ARGB header.]

4. Step 4: Connect Hub to Power and Mount

   Connect the SATA cable of the ARGB Hub with a SATA header of your power supply. Attach the ARGB Hub to the PC case using screws or the included double-coated tissue tape.

   [Diagram Description: The ARGB Hub is shown connected to a power supply's SATA connector and mounted within a PC case.]

Important Information & Disclaimers

Disposal Information: This device and its accessories are recyclable. Please dispose of them at designated collection points or recycling centers. [Recycling symbols shown].

UK Authorised Representative: ProductIP (UK) Ltd., 8, Northumberland Av. London WC2N 5BY (for authorities only).

Tehnoteka Disclaimer: This document was originally produced and published by the manufacturer, be quiet!. Tehnoteka does not assume responsibility for the accuracy, completeness, or reliability of the information contained herein. Tehnoteka is not responsible for any errors, omissions, or inaccuracies, nor for any damage caused by the use of incorrect data. For detailed product information and questions, please contact the manufacturer directly.

For the latest information on pricing, promotions, and technical specifications, please visit Tehnoteka at: https://tehnoteka.rs/p/be-quiet-triple-pack-light-wings-argb-led-pwm-bl079-ventilator-za-pc-akcija-cena/