Ecliptic Wireless Headphones
Brand: BASS JAXX
Introduction
Congratulations on choosing the Ecliptic Wireless Headphones. This manual will guide you through operating the headphones and familiarize you with their Bluetooth functionality. It is recommended to understand your mobile phone or other device's Bluetooth features before use.
Packaging Contents
- 1 x Ecliptic Wireless Headphones
- 1 x Micro USB Charging Cable
- 1 x Instruction Manual
Connection Diagram
The headphones feature the following components:
- Ecliptic Wireless Headphones
- Micro-USB Charging Port: Located on the headphones.
- LED Indicator: Shows charging and pairing status.
- Play/Pause/On/Off Button: For controlling playback and power.
- Play Next/Volume + Button: For skipping tracks and increasing volume.
- Play Previous/Volume - Button: For going back to previous tracks and decreasing volume.
How to Use
General Functions
| Desired Result | Required Action |
|---|---|
| Turn on & Enter Pairing Mode | Press and hold the On/Off Button for 3 seconds. The LED indicator flashes red/blue. |
| Pairing | Use a mobile phone or other Bluetooth device to perform pairing. After successful pairing, the LED indicator slowly blinks blue. |
| Turn Off | Press and hold the On/Off Button for 3 seconds. |
| Charging | Plug the Micro USB cable into the headphones' Micro-USB port and the USB plug into a computer or wall adapter. The LED indicator turns red while charging and turns off when fully charged. |
| Answering a Call | Press the On/Off button to answer. Press again to end the call. Press and hold for 2 seconds to reject the call. Double-click to redial the last number. |
| Play/Pause Music | Press the On/Off button to play or pause music. |
| Play Next/Volume + | Long press the button to increase volume. Short press to skip to the next track. |
| Play Previous/Volume - | Long press the button to decrease volume. Short press to go to the previous track. |
Pairing to Mobile Phone or Other Device
To use the headphones, pair them with a Bluetooth-enabled device:
- Ensure your phone's Bluetooth is activated.
- Turn on the headphones and enter pairing mode.
- Search for Bluetooth devices on your phone.
- Select "BT ECLIPTIC HP" from the list of discoverable devices.
- Follow your phone's instructions to complete pairing.
- Confirm pairing on your phone (e.g., press Yes/OK). The headphones will automatically connect when in range after initial pairing.
Charging Your Headphones
⚠ Warning: For safety, use only a 5V input charger/adapter. Do NOT use Quick Charging USB adapters, as they may damage the product.
Use the provided Micro USB cable. Connect the cable to the headphones' charging port and a USB power source.
Important: Charge for a minimum of 2 hours before first use.
Warning:
- Select a qualified charger from a reputable manufacturer.
- Charge the headphones if they have not been used for over 6 months.
Product Specification
- Driver Diameter: 40 mm
- Impedance: 32 Ohms
- Frequency Response: 20 Hz - 20 KHz
- Sensitivity: 100 dB +/- 3 dB
- Power Supply: Li-ion Battery 3.7V 160 mAh
- Playing Time: 3 - 4 Hours
- Charging Time: 2 - 3 Hours
- Bluetooth Range: 10 m
- Micro USB Charging Cable Included
FAQ
Why is there no power even when the headphones are turned on?
Ensure the battery has been charged for at least 1 hour for initial use.
There is no sound when playback.
Check the connection between the headphones and your phone or computer. If the connection is not established, please reconnect. Ensure the headphones are paired and connected to your device.
Safety Rules
Please follow these rules closely for your safety:
- Read this user manual thoroughly before using the Bluetooth headphones.
- Be cautious of edges, uneven surfaces, metal parts, accessories, and packaging to prevent injury or damage.
- Do not modify, repair, or dismantle the headphones. Doing so may cause fires, electric shocks, or complete breakdown, and these issues are not covered under warranty.
- Do not use diluents or volatile liquids to clean the headphones.
- Do not use the headphones in hazardous locations.
Battery Statement
Safety instructions for the lithium battery and charging the product:
- Input voltage: 5V 1A.
- Use only certified appropriate chargers/adapters for safe charging.
- Charge only at ambient temperatures between 10°C (50°F) and 40°C (104°F).
- Do not expose to temperatures above 70°C (158°F), sunlight, or fire.
- Switch off the product after use.
- Improper operation (e.g., voltage higher than 5V) may result in severe injury or loss of property. The manufacturer cannot control operating processes during user use.
- Extreme abuse or misuse of the Lithium battery pack can lead to explosion, heat generation, fire development, or smoke development.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
[FCC] FCC ID: 2ADM5-HP-0662
Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106
Keep all relevant information for future reference.
