1. Introduction
Congratulations, and thank you for choosing the Sport Wireless Headphones. This manual will help you operate the Sport Wireless Headphones. Please familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Sport Wireless Headphones.
2. Packaging Contents
- 1 X Sport Wireless Headphones: A pair of over-ear wireless headphones with a sleek, modern design, featuring a prominent brand logo on the earcups.
- 1 X USB Type-C Charging Cable: A cable with a standard USB connector on one end and a reversible USB Type-C connector on the other.
- 1 X Instruction Manual
3. Connection Diagram
Diagram illustrating the headphone components: a circular LED indicator light, a built-in microphone, a USB Type-C charging port, and an on/off button.
4. How to Use
4.1 General Functions
- Turn on & Enter Pairing Mode
- Press and hold the On/Off Button for 3 seconds. The LED indicator flashes red/blue. Use a mobile phone with Bluetooth function or other Bluetooth devices to perform pairing. After pairing, the LED indicator slowly blinks blue.
- Turn Off
- Press and hold the On/Off Button for 3 seconds.
- Charging
- Plug the USB Type-C plug into the USB Type-C Charging port. The LED indicator turns red while charging and turns off when fully charged.
- Answering a Call
- Press the On/Off button to answer or end a call. Press and hold for 2 seconds to reject a call. Double-click to redial the last call.
- Play / Pause Music
- Press the On/Off button to play music and press it again to pause music.
4.2 Pairing to Mobile Phone or Other Device
To use your Bluetooth headphones, you must first pair them with a mobile phone or other Bluetooth device. Once paired, they will remain paired and automatically recognize each other when within range.
Pairing to a Phone and Entertainment:
- Turn on your phone and ensure Bluetooth is activated.
- Turn on the headphones and enter pairing mode.
- Search for Bluetooth devices on your phone following the phone's instructions. Refer to your phone's user manual for more information.
- Your phone will list "HP-0822" as a discoverable device. Select it and follow your phone's instructions to complete the pairing.
- Your phone will confirm the pairing; press Yes/OK.
4.3 Charging Your Headphones
For your safety, please always use an appropriate 5V input charger/adapter to charge the product. DO NOT USE Quick Charging USB Adapters, as this might damage the product.
Use the provided USB Type-C Charging cable. Connect the USB Type-C plug to the headphones' charging port (labeled '1' in the connection diagram). Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
Make sure to keep the headphones charging for a minimum of 2 hours before initial use.
Warning:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth headphones if they have not been used for more than 6 months.
5. Product Specification
| Feature | Specification |
|---|---|
| Driver Diameter | 40 mm |
| Impedance | 32 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | 100 dB +/- 3 dB |
| Power Supply | Li-ion Battery 3.7V 200 mAh |
| Playing Time | 3 - 4 Hours |
| Charging Time | 2 Hours |
| Bluetooth Range | 32.8 ft |
| Bluetooth Version | 5.3 |
| Water Resistance | IPX4 |
| Included Accessories | USB Type-C Charging Cable |
6. FAQ
- 1. Why is there no power even when the headphones are turned on?
- Ensure the battery has been charged for at least 1 hour for initial use.
- 2. There is no sound when playback.
- Check the connection between the headphones and your phone or computer. If the connection is not established, please reconnect. Ensure the headphones are paired and connected with your target device.
7. FCC Statement
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Safety instructions for the lithium battery and charging the product:
- The input voltage to the product is 5V 1A.
- In order to charge the product in a safe manner and reliable conditions, please only adopt certified appropriate charger/adapter for charging the product.
- Only charge the product at ambient temperatures between 10 °C (50 °F) and 40 °C (104 °F).
- Do not heat above 70 °C (158 °F), e.g., do not expose to sunlight or throw into fire.
- Switch off the product after use.
- Please note that we won't take any responsibility for any wrong operation (e.g., Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user is using this product.
- In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
FCC ID: 2ADM5-HP-0822
Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106
Keep all relevant information for future reference.
