PROFLO PFWSC5260 Two Handle Widespread Lavatory Faucet
Specifications and Product Details
Product Features
- Ceramic disc cartridges
- Metal lever handle
- Requires 3-hole sink with 4" on-center
- Includes metal pop-up drain assembly
- 100% factory pressure tested
- Max. flow rate: 1.2 gpm (4.5 L/min) at 60 psi
- EPA WaterSense approved ?
- cUPC/IAPMO listed
- ADA compliant ?
Model Numbers
- PFWSC5260CP: Chrome
- PFWSC5260ZBN: PVD brushed nickel
- PFWSC5260NORB: Oil rubbed bronze
Product Specifications
The following dimensions are provided for the PROFLO PFWSC5260 faucet. All measurements are nominal and should be verified before actual installation.
- Overall width (deck to spout end): 6 7/8 inches (174mm)
- Spout height: 5 1/8 inches (130mm)
- Spout reach: 5 7/16 inches (138mm)
- Handle height from deck: 3 inches (76mm)
- Deck to top of faucet body: 5 1/8 inches (130mm)
- Recommended sink hole spread: 6 to 12 inches (152mm to 305mm)
- Compatible sink width: 12 1/16 to 18 1/16 inches (306mm to 459mm)
- Handle thread size: 1 1/8"-20UN
- Water inlet connection: 1/2"-14NPSM
- Drain assembly connection: 1 1/2"-18UNEF
- Drain pipe diameter: Ø1 1/4 inches (Ø31.75mm)
- Drain pipe length: 5 inches (Ref) (127mm) Ref
- Pop-up rod height: 7 15/16 inches (202mm)
- Pop-up rod thread size: 5/8"-18UNEF
- Faucet base diameter: Ø2 1/8 inches (Ø54mm)
- Handle lever angle: 30 degrees
Warranty and Codes
This product is supplied with installation, operating, care, and maintenance instructions.
The PROFLO faucet carries a limited lifetime warranty when installed in residential applications. For commercial applications, the warranty is five years.
Compliant with lead content requirements of California AB 1953 and Vermont S.152.
[Low Lead Certified] ? [NSF/ANSI/CAN 372 Certified] [UPC Certified] ?